GIANT expensive Banggood Special RC Car - Any good?

[@DrClawizdead]

That was a gnarly crash. I think it deserves another chance as far as durability.

[@RcPowersystems]

Cheers kevin for having a play with a small section of my rtr hard case range. More to come more to come! I know you like powerrrrrrrr Team onyx

[@EJ-74]

Is NIIICE 😁 Love the slow mo of the water spraying off the wheels, that looked really cool 😎🔥

[@replays36dxd45]

yes it is nice

[@KevinTalbotTV]

Glad you liked it!!

[@brianjacobs1241]

Hey Kevin after I buy your book to get where I want in life is it helpful if I have 10-20k for start up money?

[@remagopie5412]

@@replays36dxd45i love it

[@skylar1112]

I think it actually did pretty well considered the impact involved. Not many cars would survive that, despite the name brand

[@SteliosRcdrift]

It's official now.The Talbot Test!!!!

[@brandenplays5326]

If it’s not 3 finger average it’s not for me

[@SteliosRcdrift]

@@brandenplays5326 👍

[@Vinnyschannel]

Ohhhhh yeah that's the Truth!

[@cmaxwell3515]

Almost a xmaxx. You kevd it...Sean pendragon

[@BrendonakaShanks]

Gotta love a Talbot Test.

[@JabbieYT]

Been waiting for this one Kev! Looks like a good truck! Maybe finally a company is making a real 7075 chassis? The lamppost was really brutal though, in my opinion no one should take that as a durability test yet, but we will see. With a few upgrades this could be amazing.

[@extec101]

saw someone that tested to bash a tesla in similar fashion going to fast in a roundabout jumping over the curbs and a ditch ending up in a slope crashed to a lamp post. not eaven a tesla can survive that beating.

[@JabbieYT]

@@extec101 never though I’d here “bashing a Tesla”

[@extec101]

@@JabbieYT hehe might be a mistake by the driver. but it sounds better to say he bashed the tesla :)

[@bennson5f]

Hi Kevin my wife wants to get a tesla I told her not before we get a divorce I love her really but if she gets a tesla then needs must lol how's you doing buddy love the vit n love the truck's colour scheme keep up the good work with the vids there ace

[@kerrywalker2179]

I grabbed a roller and threw in a legit HW max6 1650 combo and I love it, for what it is. My only complaint is the body is made of very brittle plastic. Basically only gorilla tape and edging holding the back half of mine together. Needs reinforcements for sure. Working on that, but honestly it’s more of a novelty. I bash more with my other trucks that are made for it. Light truck and it jumps great, just have to land properly…every time. Looks awesome!

[@allenbaggett6908]

I think it did really well considering what it did and took. Though I agree I think I’d rather spend a bit more or less for the more established units.

[@jhansen6180]

I really don’t understand the people who buy these types of RCS. The parts availability is good money first come out but then after a year if it doesn’t sound good, you’re out of luck. And also that’s a lot of money you could buy a used X max for that much.

[@allenbaggett6908]

@@jhansen6180 typically agree. My second thought was perhaps it’s a geological thing. You don’t got to wait on the sterilization ect if you buying in china.

[@rcmadlabz2492]

Not everyone enjoys the hobby the same way. Not everyone is focused on the best bargain for their money. *Some like to be different.

[@mitchmoe6224]

@@rcmadlabz2492 being different is a good thing. Being without parts for weeks, not a good thing

[@rcmadlabz2492]

@@mitchmoe6224 Different strokes for different folks. When you have many models, next day parts availability is not typically a priority. The hobby budget is. *If this was a persons PRIMARY model, that’s different.

[@dingobird1039]

I'm pretty sure this has been one of my most favorite channels of all time

[@michaelstergiou9951]

Im sure that the XMAXX would have had similar damage. With the same hit, that was a bit on the brutal side.

[@keithpowell4664]

Best video in a while Kev, back to the Older style. Really enjoyed that!

[@Kyle_R_Wolfe]

From my experience with zd racing and breaking the plastic A arms like that. I've found it's not the plastic. It's the hinge pins bending easily and when they bend they break the plastic. I order better metal pins from different racing cars and make them work. Helped a ton

[@Kyle_R_Wolfe]

What I had was the pirates3 1/8 scale buggy.

[@estegerset]

Yep, all the pins and screws are made of chinesium

[@JamesS777]

Love the ZD racing brand, I have 3 for the price of one name brand! I can't afford Arma or Traxxas. I've never had that much trouble getting parts. They take a pretty good sh@t kickin'. Good speed, good jumps, my dog chases and bites it, smashes it and tosses it around everywhere. **You need to shim the play in the diff shafts on all ZD or you will smoke the centre diff or diffs. The only time I killed one is when I misjudged and ran into a soccer post like Kev. If you run directly into something over half speed it will break. It can cartwheel pretty dang good without sbapping. I'm very happy with my ZD racing toys and my dog loves them too!

[@brsrc759]

First basher I've ever seen with an interior and drivers. It's a nice looking body too. Love it! 😎🤙🏼

[@FarmerFpv]

0:22 Kevin, be careful. Unboxing an RC can be a hazardous job! 😂You always make me laugh. Great way to start my day!

[@mycreativeelectronics8689]

Ooooo its Christmas everyday ....never gets old 😅😅🙌

[@droberts573]

4 fingers. Lol. That's like throwing a hotdog down a hallway. Lol.😂

[@DustinDIY]

I think that was the worst possible crash. So other than the body, I think it looks good durability wise. With the way it is tuned. I would say it is more of a really rough wooded area and mud basher. The suspension and slow but strong steering and brakes makes me think that is the area to really find out how good it is.

[@qrisemrc]

Also, Talbot is having fun when he introduces a new RC. Missing or throwing a box? or make a mistake Those scenes are so much fun. Of course, the channel is great too.😁😁😁👍👍

[@oskillerf8796]

It’s always the: It’s christmas every day that makes the video somehow even better😂

[@marsymars4058]

🤘Love the staircase tumble intro Kev! Be well Brother! Mars🤘🇦🇺🤘

[@seefahrer_timo2167]

Yes the Montages are back 🤙👍👍 absolutly loving it

[@Choccykituwu]

Wooo more videossss from Kevinn! More RC! More bashing! More ripping! YESS!

[@ppgedez]

Transported back to the 80’s with the soundtrack. 🙂

[@jackw250]

At 0:04 when Kev is at the bottom of the stairs picking up the box he's dropped, I was going to make a comment about his fashion choice of sweat pants and school shoes combo. However, before pressing the comment button I thought about my choice of such a sly joke and remembered Kev has a Lambo and a monster truck and I have neither. Jokes on me really

[@DreadEnder]

8:45 you hit the pole with the rear right wheel, span and hit the front right wheel, then landed on the front left wheel But the rear left wheel is the one that broke?!?!?

[@leemaoggz]

loving all the videos man you make very good rc content

[@bigkennyg.621]

Hey Kevin my son and I are starting to get into RC in part because of your videos he was blown away by your 205mph attempts ( his jaw dropped when I showed him the video) and you are absolutely right getting into this hobby is an absolute blast and it’s helping get me out of the funk I’ve been in for the past year. the bigger trucks in this video look like an absolute blast, for us due to space constraints we are doing smaller scale 1/18 & 1/16 scale and are going out for our first rip today ( slash/Teton & bronco) so far I have meet the friendliest people😁 keep sending them to the moon 🤣

[@bronxsavage1641]

Welcome to the hobby, it's an amazing super fun activity to get into... You mentioned the 1/16 scale type, which is a good way to get into it. I would check out the hyper go line or hosim 1/16. They are really good durable little cars. And only $150 or less on Amazon

[@mlikyz]

Check out wltoys as well

[@bustedaw11]

Hey buddy with the Teton remember coda racing sold on Amazon. I've used a good deal of thier parts on our teton and they are absolutely great parts and don't cost much. Biggest issues I've had are the axles (upgraded to coda racing aluminum) and arms breaking (get the RPM arms). The diffs aren't shimmed well so if you have any problems with diffs you tube how to shim em. Aside axles and arms ours has been great. Welcome to the hobby, its great 👍

[@thebruh2777]

Hey Kev, I'd love to see another video featuring the cheap Rovan gas RC car from a couple years ago, there's nowhere you really see something like that getting the Talbot test. I feel like the metal chassis on the Rovan would be much stronger than others due to the top bracing forming a sort of tub shape. Maybe take it out in a price comparison video to other gas RC cars? Thanks!

[@ArmandShahinian]

Its Christmas everyday 🙏🏻🙏🏻🙏🏻🙏🏻😊

[@martintaylor984]

If this was a 4-500 dollar car I would buy it all day long. But i bash hard and like being able to run to the hobby shop 10 minutes away and get what I need and not only that, I take a lot of my cars camping with me and like being able to get parts at any local hobby store.

[@demarco1531]

I just got a roller for $399 on Amazon...

[@Snipermonkey966]

Ive been watching Kev for 3 years and ive watched pretty much all if his vids and I still love it 😀.

[@slick2500]

I wonder if the LED program card works with that esc. Sort of strange that the LCD box doesn't though. I've used mine with rtr escs and even with a Hexfly HEX10.

[@lxi_zx6493]

4:11 "more S'ses equals more volts equals more power" AND FUN!!

[@JH-xy2ng]

K T maxxed it out 🤣🤣🤣 RC Life 🤣💯

[@noahmiller876]

The Talbot test 🤣🤣🤣🤣 I gotta lie I'm really impressed

[@graphicalsolutions1899]

Steering seems to have some delay/lag. Seems unstable when braking, or is it the setting? €668 on sale(?) on Banggood is quite expensive i think. I got a Fireteam for €80 more and that one's a killer rig.

[@albertpoerschke1463]

Wow kevin tablot your the best at reviewing rc cars

[@bart_memez_editz]

Like the smoke at the beginning 👍👍👍👍

[@wylinout2257]

As soon as I saw the tumble wumble down the stairs I knew this will get the proper Kevin Talbot test 👍🔥

[@daviddillon6794]

The foggy disco stage introduction was cool.

[@JoshJackson13]

I hope you help Max out with parts and stuff. He makes the bashing videos alot better

[@Justmethinaround]

Perfect demo on just how expensive this hobby can be..I felt every single one of those *wasted* clips lol

[@muskokamike127]

I thought the steering looked a little slow on the bench but I have to wonder if they de-tuned the esc to help with longevity. It does look like it needs some adjustment on the steering brakes and acceleration. But seriously, driving a basher full tilt boogie into a lamp post? Yeah, I don't know that any of the other brands would have survived.

[@rcmadlabz2492]

The steering has a bit of play that can be fixed for free. This causes some binding. Check my vid on the Mx-07.

[@8ssteve994]

Awesome video dude, I’m quite sure you can brake it more than that 😂

[@HaycommsHobbies]

Hi Kevin talbot I love your videos I have been a subscriber for 2 years now

[@rc10t3]

I like the new music supporting the driving shots.

[@stormycannon8904]

Omg had a giant laugh when the smoke started lol😮😅😂

[@lifeofdave1237]

I thought it looked great, shocks were awesome and looked to cushion the landing beautifully. I think the impact was pretty tough going and could have been unlucky to break it, and could have possibly broken many other make rc's. Maybe a re test once rebuilt. For me I think slightly over priced for what you get comparing to the arrma and xmaxx, but looks a fairly good car.

[@ToastedAlmond77]

This guy is awesome he buys an expensive RC and first thing he does is drive it off his stairs lol then proceeds to try and break it, keep it up dude so great watching your vids

[@dha2705]

In Indonesia, the price is not too expensive, in fact the price is still below arrma typhon 6s. In fact, this toy is the cheapest RC 8s

[@Moggmodels23]

Yes it is expensive Kevin Talbot love the truck zt racing exo7 is the best way to I think 🤔😄 brilliant video by the way 😀

[@gabert11]

Oh it's Christmas every dayyyy OOOHHHH! gets me every time hahaha

[@dimashulman]

Как всегда, очень классный ролик! Спасибо Кевин!

[@kevinmendesracehavenrc]

Hey Kev you have your program wire for your program box reversed in the ESC the same thing happens to me until I reverse the switch and flip it the other way into the ESC it'll work it takes a couple of seconds but it will once you plug it in it has to collaborate hope this helps

[@nunu4692]

anything will had broken at the angle it hit that pole including the xmaxx😂😂😂😂talbot never gets old at destroying anything😂😂😂 still cant believe he jumped his raminator but thats expected😂😂😂🤣🤣

[@dyna.]

You might be able to use the smaller hobbywing program card that comes with esc's, that one somehow supports more esc's. For example on my kraton 8s the bigger one you use in this video doesn't work, but the smaller one that comes with esc's does. You just have to ignore the settings on the program card as they might be different but just check the manual which should have a table with the settings for that specific esc, so use that instead.

[@extec101]

im thinking its a china version of a HW 6S ESC and is the problem that a HW program card dont work. bought a conrad gt6 radio and it looks just like a flysky gt5 but display and setings is not the same.

[@TheGeezzer]

Talbot Proof: No RC Cars I've ever seen on this channel have yet to be Talbot-Proof, Kevin manages to break them all just by doing a few high jumps and heavy landings...manufacturers take note. Time to beef up the gubbins! Indeed, Time to Beef up the Gubbins!

[@SoldierBoy3064]

looks good to me.. I love the gray ring on the tires

[@jjhardie449]

I wonder if the Spektrum programmer would connect to it Kev!???

[@ClevelandRips]

I’m a big fan of this truck ✊

[@timshooter8033]

"Very Nice".....Yesss !!! 🤓👍

[@PcItalian]

Just getting into the hobby, I’ve got a 1/16 slash and the kids have some rando Chinese amazon deals (both really good starter cars IMO for ~$80ea). Looking at something bigger in the future and I’m still leaning X-Maxx

[@Tennebbee]

¡¡¡Kev I’ve been hoping for some Udr and Baja Rey 2.0 action!!! Maybe some trophy truck vs Kraton type trucks or other buggy’s

[@cherielivingstone588]

Thanks kev for always putting a smile on my face

[@Luke-en2tk]

Don't forget some of the XRT bits are beefed up like hubs which will fit on the XMaxx Kev

[@apollolang3399]

Love the smoke screen ✌️✌️✌️✌️✌️

[@MrTylerlang]

That car looks great off the start. Gonna finish the video now. Thanks Kevin!

[@Trap..house.]

So hard to watch the rc carnage 😬😂 Amazing video like always

[@rc_allthetime4770]

Always click on this message when a New video came out,,, can just be good especially when you got a new banggood special and compare it with the TalbotTest to the other ones

[@JimmyB55]

Hard to beat going to your hobby shop and picking up spare parts

[@danztastic]

Keep up the good work Kevin.😊

[@davyarthurs]

4 fingers? That’s my kind of ride 😝😂

[@The_ace_1]

Good video Kevin👍🏻

[@brianclark17]

As far as the body goes....how about using the stock body as a mold to make your own body out of fiberglass or carbon fiber or some other material? All n all I think it's pretty badass for the money!

[@humblepie9373]

The only thing about these new rc’s … half the fun was building them! My first Tamiya fox build paved the way to my engineering degree

[@bsg75husker]

love how you guys have money enough to not hold back, so we dont have to do it :).. DESTRUCTION and SPEEEEED! hahaah

[@ragercrepair9301]

This looks like a redcat rampage to be honest. Sweet truck really!

[@neontetra1000]

On a serious note Kev. I would consider redoing your course to encapsulate e commerce . No money for stock upfront required. There’s a guy online that sells framed pictures. The buyer buys it from his store and the printers print and ship the item! Amazing. He never touches the picture.

[@andyroo8uk685]

Hay kev the program card you need is the hobbywing cheap one has 3 tables on it as it's for the ezrun SC and quickrun verisons you the one you was using is for the racing hobbywing ones hope that clears it up

[@thelag1200]

Always drop what you're doing when kev uploads

[@timetokillslapp]

Nah currently I'm dropping a poop in the toilet

[@michaelhartman851]

I watched the crash a couple times with the way you hooked onto the pole don't think any other cars would have faired much better.

[@KevinTalbotTV]

think you're right! Maybe! I think the hock bent the hinge pin block, the the ground broke everything else!

[@sameerroopnarine7051]

@Kevin Talbot what is that car

[@岩永ガチ男]

モンスタートラック最高！❤😊

[@RCkingdomVN]

Your channel is my favorites channel. It is very interesting

[@krissiekristabell1060]

The problem with fancy shells, is they do break easy :( Great video

[@JRIVERA1124]

Looking to see if you had a ARRMA TYPHON 4x4 3s before can you show me any upgrades for this buggy electric is a 1/8 scale , please thank you very much

[@olds97lss]

I see that a lot with maxx4s bulkheads... (referencing the guy who's busted many xmaxx chassis's), people all over facebook touting how indestructible they are. I've had mine a bit over a year and I'm on bulkhead 10, 6 lower arms and 5 rear diff pinions. Most of which on 6S. Haven't broken a chassis yet though. Looks like the ZD broke the rear arm when it landed on the ground after hitting the pole.

[@davidsadventures4868]

Well the other guys X-,MAXX was taking the hits pretty well. The car that you had Kevin did almost a few of the same jumps as the X-MAXX but it took the damage. For example, at the skate park both the RC cars jumped and hit the pole. Your car took a ton of damage while the X-MAXX had very minimal damage after hitting the pole and bouncing off then landing on its wheels. Kevin that car you have is still awesome and you have not yet had any problems with the chassis yet and the wheels look very nice as well as the body. The whole car in general looked nice.

[@0397rb]

xmaxx had a ton of upgrades and other was stock one cost 750 the other over 1500 at least

[@nitronut4206]

kev try using the reciever connector on the esc to reprogram it, i have a hobbywing clone and thats how its programmed using one of those same programmers

[@Plump_Nick]

I’ve been going thru ALOT this last week. Watching your videos helps me to forget about everything for a little bit so thank you 🙏🏾

[@rafaspeedrchobby]

Very good your videos, what a strong car, God bless show

[@davehughes2687]

Great video dude..and hi from across the pond ☺️...

[@trashbag8124]

I want to see more sledge and Kraton exb videos Kev. What’s the better chassis for the Kraton a bash bar or carbon fiber?

[@edwarddietrich717]

Keep doin what you love Kev. Cheers from Chicago bang bang!!

[@gavindavis1091]

What car would you recommend for returning to the sport after a 30 year break! I had loads of Tamiya and an Optima Mid back in the day and really enjoyed the build process but they all seem to be rtr these days. I’m not familiar with the new brands. I have easy access to a large beach, and rough fields . Budget around £400 all in. Thanks.

[@kenblockx2010]

in my opinion it's more durable then some of the others, with a few upgrades it might be even better overall....

[@lielbertagac-ac0325]

You're always the best in RC reviews and durability test Kev! I like you videos! But this gone too far 🤣 it's brutal on a lamp post 🤣

[@cameramansam159]

Why did u change the tires on the traxxas sledge

[@trylessego]

When it breaks quick the chassis will always be straight.... XMAXXXXX

[@tm5123]

I guess everyone will be actually surprised, and question if Kev is ok, if he doesnt drop the box down the stairs 😆

[@st420-j9q]

man the worst part of living in the us is you cant get certain rc cars like this one i have been looking at something like the xmaxx and this is perfect but of course it cant be shipped to the US