Gilllette Styler Trimmer Disassembly and Repair

This video shows how to teardown and repair Gillette Styler Trimmer.
Buy Digital Smart Multimeter: www.banggood.i...
Buy Automatic Screwdriver: www.banggood.i...
Buy Stanley Soldering Iron 69-031B (Conical Tip): fkrt.it/v3fVwPNNNN
Buy Soldering wire: fkrt.it/vYyDwPNNNN
Buy SMD Machine: fkrt.it/vYxcMPNNNN
Buy USB charger doctor battery tester power detector voltage current meter Electronic Components Electronic Hobby Kit: fkrt.it/vY66MPNNNN
Buy 25 in 1 Precision Screwdriver Set: fkrt.it/8J73i4uuuN
Buy Digital Regulated DC Power Supply: fkrt.it/8pQP14uuuN
#gillettestyler
#trimmerrepair

[@vitorsousa5065]

Thanks, I had to clean up the top part entirely after several years of usage, and didn't have a clue how to tear it open

[@neerajmehrabisht155]

Very helpful video Thankyou so much 🙏🙏

[@SkullMan---]

Yep, fixed it by bending the terminal as per the instructions in the video, thank you so much!

[@ktbabs9141]

Brilliant! This little fix worked perfectly (and I didn't even have to take it apart this completely - but I totally see the reason of doing it in case the moving trimmer park is stuck somewhere or clogged up) Thank you

[@Chevette1793]

Thank you to REALLY show how to disassembly the blue part! Other dudes just made shitty tutorials that take you to no place at all.

[@Chevette1793]

@Guillermina Levering Why you and this Shane signed in KZbin in the same day? Trying to fake some confidence? Old trick. Enough with this bullshit. No one will enter in your stupid website trap.

[@evankrueger824]

Great! This video helped to fix my Styler.

[@adrianmalwah765]

Wow, that's totally worked. Thanks, I was going to throw away until I saw this ,but a bit hard getting back into position ,still working 👍

[@saumakmitra3424]

Thanks for the video. Your video motivated me to diagnose the issue. For me, it worked but not the way you showed by removing the blue part or by completely dismantling the upper part. What I found is that it is important to clean the blade after every use and one can do that by just pressing the arrow button upward and the blade backward simultaneously.

[@scchrisdavidson]

Thank you! This was exactly what I needed and was much easier than prying off all the individual parts.

[@namganglunggolmei1874]

thanks a lot. my trimmer is working again after following ur instructions.

[@edybigreit4294]

Thanks, your video helped👍🌞

[@pritamdasadhikari3778]

Thank you 😊

[@Priyanshusingh013]

Thanks

[@stevewilliams5612]

In my case I only needed to flip up the cutter to reveal all of the crud stopping the motor from working properly. Yep, just push upwards on the cutter and it unclicks as designed..

[@OthmanAlikhan]

Thanks for the video =)

[@claesmiddel7623]

How to disassemble the motor and startbutton ?

[@gunmanbg]

Thanks

[@dustinsalmeron5006]

Its ok to use rechargeable battery?

[@Yonan_]

yes

[@AndreEidler]

Good work, friend. I got a question: are these blades waterproof?

[@dubrun]

É sim. Eu uso o meu no banho há pelo menos uns 6 meses. Sem problemas até agora.

[@SuperCat717]

Yes I use it in the shower

[@iznadkasine]

Thx dude, video helped a lot

[@johng8967]

The little spring on the head came off after trying to cleaning it. I don't know where it goes

[@colinwood8509]

I have an idea........ don’t buy Gellette.

[@devil208356]

It worked for me about 5 years.

[@devil208356]

Why disassemble top part????

[@ktbabs9141]

In case the sliding bar is stuck or clogged by hair or dirt

[@epicmen111]

I destroyed it , thabks for norhibg

[@ayaanhansia7405]

The motor inside started working but not the blade

[@kshitij6627]

How u fix it

[@kleinerrebell6691]

I wished they didn't make it so hard to clean it out from clocked hair

[@vjglucky7]

For cleaning, it seems a person ought to be able to remove the black trimmer--without undoing glue and using a blade. For the top black blade to come out? and cannot snap it back on. Here? is not explanation.

[@Vladimir-ie5eu]

люди совет у кого плохо движутся лезвия после всех манипуляций сначала затяните болты до упора а затем выкрутите их на 2-3 оборота

[@halaboly8915]

Cleaning these is a PAIN..

[@troublesome9679]

Is that the motor i really gotta know im making a tattoo gun and dont wanna break a good machine

[@petersrobar1955]

No need to unglue the blue part, the pins can be opened from inside the trimmer

[@jonathanknowles1840]

How?

[@P4INKiller]

Useless information as you're not specifying how.

[@petersrobar1955]

@@P4INKiller OK ive seen there vere more guys wanting how so ive uploaded a video on my chanel for you . enjoy

[@bernardgrimm4130]

You have to be kidding me. From a marketing standpoint it might be better having someone explain to the viewer what the he'll the tech is doing instead of that annoying music. So what is he doing just taking it apart for the he'll of it. Not to mention he appears to be having a hard time doing it. LIKE INSERTING tweezers into 2 holes to extract some white crud. Directly behind the razor head is a half in piece of plastic. Hair ollects under there after you shave. That's the only reason I watched it and it was ignored. Of course I saw the entire razor taken apart for some reason.

[@sergiomasmut1585]

No necesitabas desarmar para probar el motor

[@P4INKiller]

Didn't work.

[@betulturhan925]

what did you use for disassembly the blue part? what is the name of tool?

[@eidrag]

search "opening tool"

[@savvassavvaki6825]

Search for: Metal Spudger Opening Tool

[@theregolfer9721]

Dude… no need to strip it back like this, just flick back the bladed part.

[@weka301]

Still not working

[@yiman7370]

Not helpful, the trimmer are not working but the engine does.

[@josefranciscoespinosarazo7603]

1

[@TheUltimate65]

This its a China product styler, the its not follow nothing tool too clean the cutting head of hear , Cost probently Gillette nothing to bay , but make big money fore sale in stores.

[@AnEThing]

Worst trimmer

[@mahmoudsalama1265]

فيديو تافه انت لم تفعل شيئ اين المشكله ومن الواضح انك لم تفعل شيئ