FIRST DRIVE & DYNO In The Supercharged V8 Drift Truck

[@dawsonfogle4167]

Most average afternoon with the boys: Sending a 2000lb flywheel to space with a dyno

[@Wi_Yeti_Official]

I vote for completely finishing it before taking it out

[@evankirschenmann4653]

God the UZ sounds heavenly

[@_Gingium_]

By far the best part of this thing!

[@PointBlank65]

​@@_Gingium_ now I need someone to do a UZ vs Coyote comparison. At first watch they sound similar.

[@travisstamp7428]

Because it's God's engine

[@matiasgamarra1659]

UZs are some of the best sounding v8s fr

[@hatchelldylan7543]

​@travisstamp7428 sorry but God engine is the chevy 350 small block followed by the chevy 454 big block followed by the uz

[@kwajtube]

crawling under a car on just a jack and no jackstands?! Bad Gingium, bad!

[@JasonToob]

I was looking for this comment!

[@laxminarayananks1520]

More like soon to be dead Gingium 💀

[@fredmortensen5107]

Did you guys hear the fake Jack stand noises he fed into the video lol that was funny!

[@JasonToob]

@@fredmortensen5107 is that what that was?

[@Rosteripulla]

Just in case you haven't thought of it, you have a DBW. A twitchy throttle is a matter of tuning, not a fact of life. Increase the amount of pedal% needed for a small throttle opening and your life improves significantly. Also, I'm not sure what size throttle you have but you can put 800hp easy through a 65mm TB. Big TB's aren't a necessity.

[@Wingspan_5]

"Im not going to drive on public roads" Drives all over public roads XD

[@marvinvisser5039]

Supercharger whine is just sweet!

[@Rune2242]

Just spotted you on South Milledge in Athens!! Been watching since I was like 12, you got me into cars! You were driving Molly and I gave you a thumbs up from a blue motorcycle

[@evankirschenmann4653]

Driving with no doors like a jeep is wiiiild

[@_Gingium_]

Its fun!

[@richgwozdz8580]

@@_Gingium_ you beat me to it ( I had a big turbo prelude that I called the praydude because it was such an rot box ( I had completely stripped for body work before I even came up with its official name but its name was given to it due to fact that I discovered that the car was actually in worst condition than I thought and the previous owner had lied about the car ever being in any type of accident or anything when I actually discovered that an tree had fallen on the roof of the car and was not reported to the insurance company and instead the damage was bondoed over and I also discovered that the vehicle had been rotted so bad that it wasn’t worth restoring so I I cut out the entire roof “ making the sunroof an moonroof, I completely gutted it , made a totally non functional rollcage out of 1 1/2” black gas pipe , took the doors off, kicked out the windshields and windows and replaced them with clear lexan , and I drove it back and forth every day to vocational school for a year and a half just to because I knew that nobody would steal it when I was in class because it was always at my shops door and they would never be able to get it started with out me hearing the entire parking lots alarms go off 😂

[@keithparker7412]

That’s why they got the death wobble

[@nidiahk]

Body panels or not, I need to see some mad skids!

[@r1freak1]

Finish it, body panels doors etc… my favorite build for sure

[@Deceiver935]

DRIFT TRUCK LETS GOOOOO

[@Jg15243]

I know something different than the constant Honda posts lately

[@Deceiver935]

@@Jg15243 I like the Honda posts too, I just miss the Fab work. But I know Caleb said he’s a bit burnt out on it

[@Jg15243]

@@Deceiver935 he hasn’t started a new project that wasn’t a Honda in over a year tho… he’s worked on molly and the drift truck but actually started a new build that wasn’t a Honda it’s been over a year I’m fine with what he’s doing but why is it constant Honda builds? No other brands he needs to change his name to hondium at this point

[@Akuyah.official]

Would love to see you fabricate a custom body for the truck. Having the raw kart makes for a great starting template for something truly unique to your channel!

[@fredbawden1468]

Nah, the truck is cool. Just needs bodywork and paint (maybe a livery).

[@durkken_no_aim]

man ive been watching you build this truck for a long time and its honestly my favorite drift build i've seen on youtube period. so much work has gone into this amazing machine man. i woulld love to sse another from the beginning to this point video highlightng your favorite parts/moments of the build and driving it. i am super digging the bashbars on it

[@Leandro3065PT]

ALWAYS cross straps on the wheels that have traction/are on the dyno, that way it'll prevent sliding. So if your car is AWD you'll want both front and rear to have straps crossed, RWD you'll just need the rear, and then for FWD, well it's self explanatory. Sometimes you'll be just fine how they are now, but depending on how they're anchored, the strap might want to go a certain direction.

[@tylerlagarra1095]

Go to the track as is, if anything goes wrong or needs to be replaced or inspected, itl be a lot easier to do so without the panels being in the way.

[@foodstore2022]

This video should be flagged for sexual content, one of the best sounding UZ's i've heard

[@Drplays-wz1zm]

FINICH i want a drift truck, not a drift kit. love you my man keep up the god work.

[@charleshulsey3103]

Taking regular breaks for co2 might be a blessing in disguise for the engine. But seriously, ventilation! 😅

[@Logan.Senhauser]

Love how scrappy the dino is, obviously gotta keep it safe but just love how resourceful you were with it

[@M.C.Salazar3837]

Take it to the track!!!! Gotta see this thing back in action again.

[@rv9990]

I would most definitely put the doors on when taking it to the track.

[@cosm3r]

Unreal! From watching you as a kid in the forza days, turbo-ing molly, to THIS. Amazing work, you should be very proud!

[@Cil-iz5jo]

Damn bro… I used to watch you in 2016 when FM6 was a big thing. Loved your built or bought series and it made me fall in love with the game myself! So cool finding your channel is alive and well amigo!

[@matriix18]

Time to get that hub dyno. free up space in the shop and get more accurate with the pulls. Keep up the great work

[@jdl9202]

Seeing this thing driving again is so sweet and the sound 😌

[@DeividasGedgaudas]

Always love seeing Laurel in the videos!

[@allovertraveler]

More drift truck content!!! And yes please put the body panels on. 👍🏻

[@dcoffman6861]

Loving the new direction of the truck. Good job.

[@zimble]

Coming right along! Smooth day considering everything. Take it to the track in cart form, easier to tear it down and inspect everything!

[@andrewbrown9460]

Love those super charger noises 👍

[@macaulayholland3516]

That whine omg good job fella. U.k approved 👌 🎉🎉😊

[@kylebrumley-lg2sr]

Finish it put all together and send it 🎉

[@davechakh3700]

Best drift truck build behind that Hilux

[@Thelegoman901]

I'm so glad you didn't use the dyno almost launching into the stratosphere as clickbait. Kept the title about the original topic

[@levan444]

UZ sounds really good

[@keithparker7412]

The drift truck is lookin wild these days, and sounds wild too 😏😏

[@DrakeNAllen]

Stay safe with the storm going on!

[@dylansnyder7757]

"I'm not gonna drive on a public road" drives on populated public road. Lol

[@keithparker7412]

“People aren’t normally here” *three cars driving on the road in the background*

[@briansavage932]

Shh!

[@JT1237]

An LS would be able to make so much more power easily but I respect using the UZ for something more unique.

[@JulianVR4]

Agent47 broke the dyno!

[@roboman2444]

You need to do a once-over on the steering. Make sure there's no possible way for that to go wrong. I think you need to drill a hole through the shaft for those screws to got into, so they can't back out.

[@dannyjr7997]

Engine sounds wicked nasty love it!

[@curdisdunn5414]

Race your accord against my 03 acura cl type s attempt 7 addicted to the content man I'm working on the cls's brakes right now

[@Micahvsmith1]

Rare car. Bm dad has a silver one. Love them

[@curdisdunn5414]

@Micahvsmith1 it has almost all the same identical setup to his accord. Bc coilovers ,hybrid racing shifter Clutchmasters fx350 kit lightweight flywheel, federal fz201 tires track brake setup. I have a p2r adapter kit for holley efi manifold , ms3pro mini ecu and a few other things waiting to going in when I get a supercharger and fuel system. That's why I've been trying to race @Gingium before he goes turbo cause I don't have the fuel system or s/c yet. lol

[@jorgeantonini201]

We all know he didn’t wanna hose up the exhaust on purpose If he can run the hose behind the vehicle/dyno, he should also be able to run it UNDER the vehicle and onto the side exhaust.l He just wanted to hear the supercharged 1uz glory, and share it with us Also out of pure coincidence right when he said that’s the car on monoxide alarm, my video froze For a second I was like…”that’s it? He set the alarm off and that’s where they all died and the video stopped? Is this like the ending from the Sopranos?” Then after like 30 seconds of buffering it continued playing…. I was like “Oh, nah they’re good. 👍 ”

[@victor440_]

I would definitely finish the wiring and put all the panels on and button everything up because it's probably going to be a totally different feel from being all that weight off of it to putting all that weight on. Awesome build great job 👍🙏

[@Zaaf2003]

The Mazda truck makes me miss the Volvo, excited for the next time you build another dragster.

[@vfxteamde]

Great Video as usual! I‘d love to see the thing hit the track once it‘s ready ready. But you do you and I‘ll be watchin anyways 🤲

[@jbg6961]

Great content 👍 try it out without panels before finishing it

[@marshy_4599]

I say take the truck to the track as it sits, gives you a chance to see any weak points you might have and easily modify if needed without it being FULLY finished

[@cavecanem1741]

JFC Caleb, use a jack stand. Please.

[@nclivin4220]

Good to have a niche until you can expand into more as you learn. In reference to your guy tuning miatas on megasquirt. That's wisdom

[@batmantheboss3260]

@21:00 Successful👎 Sketchsessful 👍

[@jaronmusselman9896]

Finish it!

[@PerfectFitGE8]

A Keegan build would be cool.

[@jetink600]

Put it all the way back together. And get rid of the fake exhaust. I think you should build a Nascar style boom tube exhaust

[@Jeeplee_rc]

As a jeep driver I confirm the death wobble 😅💀

[@yoshibomber]

I think it would be sweet to get some reaction videos driving it on the street as is lol

[@mattobrien2010]

Get some cams next, I'm a simp for the chop chop 🪓🪓

[@susredneck2595]

I’d love to see a mini drag truck with a supercharger

[@reallybigfooted]

For a small diameter throttle blade... that throttle body is massive! 😅

[@redsquirrelftw]

You know it's a good tune when you break the dyno lol.

[@QuasiDude]

Destroying the dyno is a flex

[@filip3330]

DRIFT TRUCK!!!!

[@DuffBeerLover]

For those of us that doesn't follow every video, could you include a bit more information about the setup when presenting dyno numbers? I would love to know what's done to the blower and such.

[@draggonhedd]

"it gets quite fumey in here" What about that giant exhaust fan by the ceiling, directly above the truck? Shouldn't that be going? I love this truck so much.

[@_Gingium_]

Nah it really doesn’t do anything. Spins so slow

[@draggonhedd]

@@_Gingium_ a little oil, a little grease, a little tune up, or a new motor, i bet that thing could move some serious air! OR uh... idk i guess a longer exhaust hose for the dyno would be good lmao. dont fuck around with carbon monoxide.

[@zaikton9983]

13:24 bambaclaat👍🏼😃

[@JDGeorge240sx]

Close your eyes, sounds like a terminator mustang with an exhaust. Still the 1uz sounds fucking good!!

[@Seymour890]

You make me wanna up swap mines if I had the budget

[@daltonhawn7253]

Why does the monitor he has for the dyno when he does the pull say like 500 horsepower yet when they finish it was only 348?

[@_Gingium_]

It has a silly “wheel horsepower” calculator thing it tries to use even though it’s already measuring wheel horsepower. It’s kinda a wack software, but it’s cheap so 🤷‍♂️

[@daltonhawn7253]

@_Gingium_ ooohh i was wondering I'm like 348? It said 500 lol

[@danielchampion2982]

​@@_Gingium_ Maybe it's calculating crank HP?

[@stefakyou6103]

@@danielchampion2982 I wouldn't think so, because 570HP isn't 400WHP. 170HP in power losses is just too much. Unless it really is just a goofy software

[@shawndasilva]

I want to see it on a proper dyno 🎉

[@osmiumviii4193]

At the end of the video, you sounded like a defeated high school teacher where nobody did the homework. 😂

[@trilliamogdlocog4986]

I love the 1uz but money spent for these horsepower results is what ultimately made me look at other options a junkyard vortec will pull these numbers with simple bolt ons

[@travisstamp7428]

I think my gs400 just winked at me after hearing this 😂

[@J3n555]

At 12:20 you can see it sling some of the dyno belt in the background, it started to fail before that even

[@mastercricket7626]

Right on bro , and i think u should track it like this and then with the body panels to see a comparability to see if or how much of a differance it makes , like for aero or sliding or just the feel , tbh im curiouse to see how differant it will feel with to without body panels and the lil weight differance it will make and aero differance 😅.. when car guys nerd out 😂... I hope the dyno is not major fubar brotha, and the front end is just loose .. peace and love all, keep it rad, stay safe, and build on..l8r famz and keep having fun

[@musthaqali2404]

I wonder how your mate in the passenger seat see with that massive cobweb in his field of vision 24x7

[@JaredS23]

Is that fake dual tips?

[@Sam-zc3oe]

I think so 😁

[@_Gingium_]

Yes😭

[@jts1112]

@@_Gingium_please fix it 😂

[@foxdie3240]

​@@_Gingium_just gotta put a juicy single instead

[@shawnhouston3975]

You can see something getting yeeted into the wall at 17:42

[@J_Vegas1320]

Tunes dont go bad

[@phantomflame0658]

Truck looks and sounds epic!! Love the whine, just like a Cobra or a Jag. I'm wondering if you're ever thinking or raising the RPM limit? Or will that need new cams?

[@Bicyclebronick]

an't no way bro said bomboclat 🤣 that's not how us Jamaicans say it

[@dabitoyatodoroki6985]

You should get either another Miata are a Honda CRX del Sol and just strip the body work cagely body frame and turn into like a buggy or something

[@woodzy575]

What is wrong with the from end? quality videos as usual

[@lukerutledge1357]

Bring it to the pizza factory meet next Friday!

[@chrishayton1]

hey man i know you might not read this but you should build a custom car trailer

[@dakotajones8010]

i still die on the hill that this would be a good roll/dig car as well it weighs nothing and made what 374hp thats movin for a lil ass truck. you dont gotta fight God to have fun in roll or drag racing

[@kyrawendling559]

Nice!

[@TodoEnFoko]

UZ All the wayyyyyyy😎😎😎😎

[@quincyisom2969]

Not the bumbaclot💀💀

[@foreverjim5240]

What is that... A dyno for ants!

[@SKOMPAS]

The moment you realise the dyno is just in the middle of a room with no windows… You know most dynos are at a garage door or ventilated room for a reason

[@birkmh]

Drift truck!!

[@bruce841]

Please keep the drift truck RED

[@tylerreed7385]

Tbh belt and chains just makes me think of grind hard plumping CO, channel idk why

[@SlapoutGamingYT]

Would be cooler if this thing had either a Whipple LS or a 10-71 blower on a 454 bbc.. would make more power and be less of a disaster and make over double your current horsepower... possibly even 3x the power

[@ubertalldude]

Sweet

[@leftcoastdrifter]

Drift truck!

[@CxlebHan]

Take it to sema😏

[@Riley8425]

What gen of megasquirt is Molly currently on? Wondering cause you said it doesn’t work well with flex fuel