Giulietta 2.0 JTDM Oil Service Guide, Including all filters

[@audia2fixingrepairsandmodi850]

Thanks for this , very usefully as I am doing the wife 150bhp one next week , the spanner size , and oil filter position have already saved the day ! Cheers

[@JoeRobson89]

Great video, all the info condensed down into what should be enough if you are competent enough to attempt this, thanks!

[@ianwoodland7379]

Great video. I did Wince when you got under the car with only the car holding it up though. I can't do that. Too many thoughts of my head exploding like a squashed water melon. I use a wooden chock to make up the jack myself.

[@meirionevans9088]

haven't serviced one of these yet. will be soon. where the oil filter is I had this with a vauxhall astra 20 litre diesel. I used a low profile impact socket with hole either side and used a small screwdriver to undo it. gutted I could torque it up to spec tho.

[@zakariaelotmani4024]

Thank you very much for the video. It was very useful !

[@mbcorse8108]

Great job! very helpful!

[@nsoper19]

the most ridiculous service procedure i've ever seen and I love it.

[@stevezodiac160]

How do you reset the service light (spanner) and the ‘service coupon expired’ message after the oil change?

[@tonycredland6264]

hi did you do a video of the cambelt change?

[@IsDitGerben]

Where’s the part where you change the airfilter?

[@andygidea]

How many Liters of oil does a 1.6 Jtdm 105 hp Giulietta needs?

[@miiiiiturn]

Superb video. Very helpful thank you! Did you find a loss of low down torque with the K&N?

[@Flexiblood]

When you changed the oil filter did you make a mess around the filter? The filter on these is mounted sideways and when I did mine I made a complete mess of the drive haha!

[@carlcarpenter3933]

Did you manage to do a vid on the cam belt change be good to see it

[@innovab2beuropa957]

So far this is the one of the best real instruction video, with full details, it took 4-5 hours to get it done.Make sure you have all the rollers changed.Good luck.. Here is the link for changing timing belt 2.0 JTDM kzbin.info/www/bejne/o6m9pqCtYriSfK8

[@gavinwilliams2280]

Did you manage to change the oil filter with a 32mm socket or do I need a spanner because of the tight space?

[@colmarrobmac8065]

There's no room for a socket- not even a 'low profile' one. You need a spanner, and a full size 32mm spanner can be too long. You might want to use an an adjustable spanner, or a compact plumbers spanner. Also, the filter dumps oil all over the place when you remove the top. Have some rags to hand.

[@cruachan1191]

@@colmarrobmac8065 about to do mine but the recommendation I got is to use a cereal box and make a "gutter" using the shiny side to catch the oil and let it flow to your catch tray www.alfaworkshop.co.uk/Giulietta_2.0_JTDM_oil_and_oil_filter_change.shtml

[@colmarrobmac8065]

​@@cruachan1191 Did this on Saturday. I attached a bit of scrap garden hose to a small funnel and held it under the filter housing as I loosened it. Managed to drain most of the oil into the oil pan. A bit fiddly but much less mess. If you haven't done this yet, the sump plug shouldn't be over-tightened as it risks damaging the threads on the sump. It only needs torqued to about 25 Nm . No more!

[@Negativvv]

What an utterly stupid place to put the oil filter... At least it beats the location of the Busso V6's oil filter in a 156 as it's not near any other pipes. And the housing type filter always beat the can style ones for me.