GL Racing GTR Project Introduction

  Рет қаралды 1,090

Athar's Garage

Athar's Garage

Күн бұрын

Introduction video to my new project: GL Racing GTR build for Houston RC stock touring class. 2S Lipo 2500kv.
If your local hobby shop carries this, please buy from them. Consider supporting my local hobby shop HoustonRC. All these items should be on their website here:
www.houstonrc....
Additionally, you can email them the list below to order parts - HoustonRCRacers@Gmail.com
GL Racing GTR Kit - GL-GTR-SET
Must Have Option Parts -
GL-GTR-OP-004 - GL GTR Alu. Dual Steering Arm with Servo Saver Set
GL-GTR-OP-027 - GL-GTR Hybrid Chassis Set
Nice to Have Option Parts -
GL-GTR-OP-009-2 - GL GTR Alu. Steering Knuckles (2°)
GL-GTR-OP-020 - GL-GTR Screw Adjustable Shock (Front)
GL-GTR-OP-021 - GL-GTR Option Side Dampers
Electronics Gear, ETC -
GBY003 - 2S 360mAh Lipo Battery Pack
HRC2500KV - HoustonRC 2500 KV Sensored Motor
HRC06 Servo - HoustonRC HRC06 Servo
HRC Servo Horn HRC06
HRC3625C - Ceramic Bearings, 3x6x2.5mm (4pcs) (need 2 packs for the car)

Пікірлер: 3
@ninthislandrc
@ninthislandrc 8 ай бұрын
Looking at the servo, and servo packaging, I'm 99% certain that the HRC06 is a rebranded AGFRC A06...and, looking at the HRC website, it's confirmed. Excellent servo. Going over your parts list, and comparing against mine, the only real difference I see is that you selected the 2-degree knuckles, while I'm considering the 1-degree knuckles. Any specific reason you went with 2-deg over 1-deg?
@grantfarrelly2821
@grantfarrelly2821 11 ай бұрын
See you in stock touring buddy! I think with the 2500 motor you won’t want to run the extra brass plates. It’ll be too heavy. Curious to hear your take on the 2 degree knuckles. That’s the only option I haven’t run personally.
@atharsgarage4197
@atharsgarage4197 10 ай бұрын
Missed racing with you the last few times! Thanks for the tip on not running the extra brass plates. I was recommended to use the 2° steering knuckles for our tighter infield section. I don't really do the series races on the larger sweeping layouts, so I opted for the 2° knuckles over the 1° ones. Once I have them built, you are welcome to try them out on your car to see if you like it. What do you have on your car now?
GL Racing GTR Unboxing
7:50
Athar's Garage
Рет қаралды 487
GL Racing GTR Build - Step 5
12:45
Athar's Garage
Рет қаралды 250
PEDRO PEDRO INSIDEOUT
00:10
MOOMOO STUDIO [무무 스튜디오]
Рет қаралды 26 МЛН
这三姐弟太会藏了!#小丑#天使#路飞#家庭#搞笑
00:24
家庭搞笑日记
Рет қаралды 120 МЛН
Underwater Challenge 😱
00:37
Topper Guild
Рет қаралды 48 МЛН
GL Racing GTR Build Video
26:27
Houston RC
Рет қаралды 10 М.
GL Racing GLR-GT 1:28 Scale RWD Review and Upgrades
6:58
Sammybaka Mini RC
Рет қаралды 10 М.
Must Do Kyosho Mini Z Mod That Cost Nothing
9:36
Mark Santa Maria
Рет қаралды 75 М.
[Unboxing & Testing] Furitek Aluminium Case ESC & Motor Combo
9:04
Beaver's Hobby
Рет қаралды 9 М.
Miniz AAA info video
10:58
Chucky's Hobbies
Рет қаралды 1,4 М.
GL Racing GTR. The BEST mini RC racer?
9:14
RC Expats Hong Kong
Рет қаралды 13 М.
Kyosho Mini-Z for Beginners-Chassis Configurations
6:28
Byebye Racing
Рет қаралды 30 М.