Remounting a roughed shaped salad bowl on the lathe.

[@DanaOredson]

Great overview of re-mounting a bowl for finishing. I learned a lot!

[@glenncurtis6037]

Ingenious! I just made one. Thanks for yet another great idea from Glenn Lucas.

[@GlennLucasWoodTurner]

You are welcome.

[@inspectr1949]

Just got back into bowl turning after 2 years away from it no better refresher teacher anywhere then you Glenn.

[@DanJoy07]

I found this to be a wonderful instruction. Your Methods of centering a warped structure seem bullet-proof. Thank You!

[@GlennLucasWoodTurner]

Glad it was helpful!

[@cam1967ss]

Thank you for sharing your tips, Glenn.

[@GlennLucasWoodTurner]

My pleasure!

[@billrogers5870]

1st time I have seen one of your videos great info and very well done ...looking forward to more content!!

[@michaelvankoevering3770]

Really nice video Glenn, and always a good reminder of how to get the most out of our bowl blanks. Thanks for taking the time to share this. Be safe.

[@GlennLucasWoodTurner]

Michael Van Koevering Thanks Mike.

[@erniegray3500]

Just learned some new tips Thanks

[@UndertheWaterDesign]

Fantastic Glenn. On the way to the shop to make one shortly. Just purchased two sets of nested bowl blanks to begin this next journey.

[@ToolMetrix]

Love this, Glenn. Thanks for sharing! Stay safe. Cheers, Paul

[@GlennLucasWoodTurner]

Thanks, will do!

[@erickuehne4194]

Nice video Glenn. I've use the mdf disk with carpet padding and had great success with it.

[@GlennLucasWoodTurner]

Great to hear you like it. The carpet padding will do the job. Interested how it holds up over time so I can give feedback to others.

[@chrish8294]

Thanks for sharing! I have been eyeing your bowl reversal setup for a while. Great instruction as always!

[@loujacobs9291]

I had the pleasure of watching a couple of your demos live at Saratoga last year. This was like being back in your audience again. Thank you, and stay healthy!

[@marshallgorrow5543]

Thanks for sharing your knowledge and jigs with us.

[@TimRobertsonWoodturning]

Thank you very much for the video. I have a set of your videos and this just adds to the collection.

[@GlennLucasWoodTurner]

thank you Tim for all your support.

[@redheadhippiewoodturning4694]

Thank you for sharing a video Lucas! I enjoyed watching you do some more turning and I’ll definitely be making the gadget to help out with my bowls that have dried offset. Have a great weekend my Irish friend 🤙

[@GlennLucasWoodTurner]

Glad you enjoyed it! take care.

[@mikestafford8371]

What a useful video with great instruction and explanations. For years I have struggled with that warpage that makes the bowl rock and used thick carpet padding mounted on a large plywood disc to help minimize the rocking. Your method is a better way.

[@GlennLucasWoodTurner]

Thank you Mike, I hope that all is well.

[@pettigrewwoodworks]

Excellent instruction. Hope you and your family are staying safe.

[@GlennLucasWoodTurner]

Yes we are. Thankyou.

[@WarEagledkp]

Ah, you did mention that aspect in the video. 😉 Thanks for the quick reply. 👍

[@seankelleher3697]

Excellent as usual Glenn must make one of those to add to my workshop arsenal .. Thanks for sharing . Stay Safe

[@JoelElder2013]

Great video Glenn, thanks for sharing it's very timely knowledge for me. 😁

[@GlennLucasWoodTurner]

Glad to hear it

[@WOODTURNINGBYBRANDSTRUP]

Thank you Glen for sharing, stay safe 😃😃

[@GlennLucasWoodTurner]

Thank you, I will

[@gynenesullivan3218]

Good to see this process, especially the faceplate mounting. Thanks and hope you and your family are safe and healthy!

[@GlennLucasWoodTurner]

Thanks Gynene. We are all well but ready to get out into the world again.

[@mikedoyle5362]

Thankyou Glenn, hope you and family are staying safe and secure. The instructions are great and now I believe I’ll head out to the shop and make a couple of the rubber face discs. Cheers

[@geofkusch3934]

Thanks, Glenn. I studied with you last year at Marc Adams, and I use your techniques on every bowl I make. Your instruction technique is excellent. I hope you will video doing a final turning of one of these beautiful bowls. Cheers and I hope progress on the new school can begin again soon. Be safe.

[@randyhogan3071]

Very helpful video. Thank you very much!

[@jamesanderson9441]

Great video Glenn. I use a face plate centering tool/jig for attaching the plate to the bowl blank. The centering jig made by Gord Rock on KZbin works well. Makes centering the face plate a breeze. Stay healthy and safe.

[@AsherLangton]

If you have access to a 3d printer, you can print out this little gadget that screws right into a faceplate and allows you to align it with the center: www.thingiverse.com/thing:5030806

[@raydriver7300]

So interesting. Thank you for sharing 🌞

[@GlennLucasWoodTurner]

Glad you enjoyed it

[@fredricksickelbower9431]

Thank you very good information.

[@GlennLucasWoodTurner]

You are welcome

[@pcicchin]

Brilliant!

[@tomshahriari6602]

Brilliant

[@johnmitchell1614]

Hello Glenn, thanks for the interesting demonstration. Can I ask what the threaded attatchment you have on the tailstock centre is for? You've got another subscriber. Best regards.

[@GlennLucasWoodTurner]

it is a tenon sizer and available from our website www.glennlucas.com

[@quetuani8970]

Hi, I see that the new tenon diameter is lower than the one used before. Having only one chuck, during the roughing phase I have to use the more open jaws (larger diameter)? So then I can still get it with the same chuck, right?

[@GlennLucasWoodTurner]

Correct but it just won’t be as secure with the open jaws as they tend to compress the wood.

[@eriklarsen6131]

I like your instructional videos, but I miss one thing. When you are coring those bowl blanks, what do you use to seal the wood so it don´t crack? Or is it not necessary?

[@GlennLucasWoodTurner]

All that information is covered in our instructional dvd and downloads. KZbin just gives a flavour of what is on offer :) glennlucaswoodturning.com/product/mastering-woodturning-series-no-2-bowl-turning-techniques-dvd-or-download/

[@WarEagledkp]

Enjoyed the instruction & your teaching style is easy to follow. Thank you! New subscriber. Curious why you use two separate raised panels with the corrugated rubber rather than a one complete circular piece for the corrugated rubber? Just conserving material?

[@GlennLucasWoodTurner]

The top of the bowl is not flat after drying so it would rock on a flat surface.