#716

[@RidonaCarson]

Love the little shakers. I have some to make. Just haven’t done them yet. So I wanna hit the like button, however I can’t cause it’s stuck on 665 so I’m not pushing that thumbs up until someone else does. 😢🐾🐾God Bless & Love to All

[@glitznglitterbymichelle1]

😁😁😁

[@Mamas-Madhouse-Creations]

Those came out really cute Michelle 😍 Awesome for never really having done shakers before. Thank you also, for sharing the scripture 🙌❤Gail

[@glitznglitterbymichelle1]

Thank you so much Gail!

[@Mamas-Madhouse-Creations]

@glitznglitterbymichelle1 you're welcome 😊

[@reginadarlin596]

Also for the ones without holes, you can drill a tiny hole to add liquid and then use an eye hook and uv resin to close, then you’ve got a hanger to make keychain as well. If you don’t want to add water but still want a hole for an eye hook, drill a tiny hole and attach with the eye hook and uv resin

[@dawnbozykowski1306]

I love these! I like the sound of the dry ones but also love when they float lol❤

[@kimberlyjohnson7139]

They all came out cute. I think i like the one's you can hear when you shake it. But none the less all are very cute!!!!

[@marybeth17]

Hi Michelle, they came out very cute. Take care and have a blessed weekend. 🙏🤗💗

[@pamelapage5094]

How about putting a hole in the acetate to fill it with water,then filling the hole in with the top coat resin

[@glitznglitterbymichelle1]

I’m sure that could work too 👍

[@thequeenofnorway]

Was just going to comment that, I've seen several do that, just pierce a hole in the acetate with a needle, fill it and plug the hole with uv resin.

[@wolfgirl-bp9uz]

I do that with mine it works just fine. Love you channel. I learned so much from them. Thank you.

[@lindahamm193]

So adorable. This might be relaxing for me. Like them all.

[@salonigandhi1608]

Lovely shakers 😊 and amazing UV glitter resin

[@dianeburnettpookie1237]

Just adorable!!! I would drill holes in them to make keychains. The glycerin and water worked so well. I just love both.

[@Shanenkj]

You did perfect with adhering the acetate! They are all so cute!

[@debgoff6031]

Benita is an Earth Angel

[@glitznglitterbymichelle1]

I agree!!

[@rosanneducharme5486]

They are all adorable.

[@ReadingWithGreatGrandma-yc2wx]

They all came out cute. I like them as shakers more than if you filled them with any liquid. What a novelty and so much work.❤ I think you should take Sunday off.

[@toniahughes6818]

Very cute. Fish and moon are my favourites. I might have to have a go - sometime 🤣

[@barbpierce4399]

You could add a bail on them to make them key chains

[@deannawarford7168]

Those are so cute! I like them both ways. I love when you show us new things...my wallet does not agree 😂

[@glitznglitterbymichelle1]

😁

[@lydsnews]

😂 so agree. My pocketbook is not a fan.

[@ReadingWithGreatGrandma-yc2wx]

They all came out cute. I like them as shakers more than if you filled them with any liquid. What a novelty and so much work.❤

[@robertarumsey3858]

Nice work! I have a few of those molds. You have given me courage to try them now. I poured a couple with 1:1 resin and now I know u v will be quicker.

[@dianeduschene5682]

I have the circle mold but yet to try it. I think I like the water-filled ones better. The moon was filled with just the right amount of water - perfect!

[@aprildalby6777]

They all turned out great! My favorite is the ❤️ heart

[@LorraineCastellon-Rowe]

Ok, I LOVE, LOVE, LOVE all of these!!!❤❤❤ You have got me hooked. I'm going to start collecting all the shaker molds now!! A lot of people use them for badge reels. Nurses love them. Thank you for sharing this awesome tutorial. You are so thorough and that really helps. 🩷🩷🩷💙💙💙❤️❤️❤️💛💛💛💚💚💚🧡🧡🧡

[@glitznglitterbymichelle1]

Thanks! I'm glad you liked it.and that’s a cool idea!!

[@elisashue5086]

They turned out so cute!! Thank you 😊😊

[@slvihelenevorrenaasand7835]

Cute little shakers ❤

[@janicepage2257]

They came out ABSOLUTELY GORGEOUS.

[@jeaniebrown8119]

Fun and cute project. ❤❤❤

[@leetteduran4580]

These are sooo cute! The moon is my favorite and the inside cuties move really well!

[@paulinehiggins8239]

I just got these moulds and was looking for how to do them and here’s your video. Ta heaps. 🥰

[@glitznglitterbymichelle1]

Perfect timing!!

[@cordeliagriffith5925]

They all turn out so Cute and Adorable !!! Love ❤️ 😍 💖

[@cindybrienze8723]

These are so cute!

[@raeannhempel3837]

They came out beautiful

[@suewarnes9469]

Soo cute! Love them!❤

[@Spoillygirl]

These turned out really nice💜 They can be shakers without liquid in them. I’ve made a few as keychains.💜

[@alisonmary1443]

What a good idea, I bought shaker moulds and wrong liquid filler I will definitely have playtime with them now. These look so pretty. Thank you ✨and I only do fiddly 😂

[@RenaLarson61]

They're all really cute, my favorite is the little octopus in the blue

[@CynthiasCraftsandmore]

Those are cute. The ones without the liquid make noise, and the others don't. I like the noisy ones 🤣🤣I'd get too frustrated making those, so I will pass.😁😁TFS! Blessings to you my friend. Have a blessed week. ✝🙏🏼💕

[@glitznglitterbymichelle1]

Yes they are many steps for a tiny piece!!!

[@carolynpitts2053]

Very cute...you did a great job...like the uv glitter you used...enjoyed watching...God bless

[@genajones2823]

They are adorable

[@kdscraftcorner]

I've always topcoated after filling. The acetate has more give than the UV topcoated acetate. For ones without filling holes, I just punch a hole in the acetate, add a tiny piece pf acetate or a tiny glue dot to the hole, then topcoat it. ❤

[@dianeh2420]

I love those glittter UV resin!!! OMG!!!! Hope tget cime out wuth bigger bittles of it!!!!

[@Tammy-ml5pt]

Those are really cute

[@deborahespurvoa2797]

So cute! Wonderful work. Bless you and yours. ❤🙏

[@sonflowergems]

Those would be great for favors for a kids party, a reward for a job well-done or stocking stuffers. For adults, to enclose a keepsake like some of that Greek sand or pebbles you found. So relaxing to watch the glycerin ones move. Adorbs!

[@glitznglitterbymichelle1]

I agree!

[@tammytoth5874]

Super cute ❤❤❤

[@sharonwarden3502]

Michelle I use baby oil, just make sure that there is no leaks because it can and will get messy if it leaks. They tum out beautiful.

[@reginaphyfer9619]

Pretty 😊

[@66danette]

Good job!!!!! Nice

[@josetteforde6817]

Viewing from the caribbean your resin uv projects are just beautiful michelle love them

[@Dawn-q3f]

1❤❤I guess I need to order some.❤

[@melissaphillis7247]

Brilliant ❤

[@GGResin21]

Just in time, my Amazon order of shaker supplies is just arriving and I need more info before I start! thank you

[@glitznglitterbymichelle1]

You're welcome!☺️

[@Marjanna1966]

If you drill a hole for the water/glycerin, you can uv an eye hook in it to make keychains

[@mcuttercreations]

Those are cute

[@Jfletcherart3642]

Those are cool

[@Shanenkj]

Some people like having no bubble and some people do, it's all personal preference. Those that like having a small bubble inside believe that it helps the fun stuff inside move more, like the bubble can help push it around. And those that don't like the bubble just don't like how it looks. It's all what you like.

[@cheryl3895]

You have way more patience than I do but boy dod they turn out cute. You could probably drill a hole at the top of that cute fish and string something that way. Anyway just a thought. Thanks for sharing ❤

[@farasanchez2618]

Use a small eye screw on top of each to make it a key chain

[@MsParaPro]

Yes you should top coat it. Then use a syringe needle to fill it.

[@lynbit]

Cute.

[@oliviarobinson5460]

Thank you for the fun tutorial i was wondering if you could use the little hole makers (the smallest one)from little windows ? lay that where the fill hole is so resin doesnt accedently fill it in ???

[@glitznglitterbymichelle1]

Oh yeah!!

[@juliasmith2000]

So if u want to add liquid to them just use ur drill and a small bit and drill a hole, then fill them up until full then use clear uv resin to seal the hole and top coat over the accetate and it will be all good.

[@Shanenkj]

You also don't need to cut the shape of the dolphin, as long as the acetate is smaller than the outside shape, it works! So you could've cut a simple circle if you wanted to, since it will be covered in resin.

[@glitznglitterbymichelle1]

Good point, I didn't think about that!

[@laurapacciani4392]

Love them. Where do you get the bubble beads from?

[@glitznglitterbymichelle1]

They were a gift, and where they came from stopped selling them. I bought out all her inventory of them and just sold out of them too 😑

[@tammystutz2311]

I store my bottles upside down, that way when I use them there is no air in the tip. I hope this will help.

[@donnaselinger8602]

Would putting a bale on them work to make them as keychains? They are too much work and too cute to just make into fridge magnets.

[@glitznglitterbymichelle1]

Yes if you use a strong glue I think it might work

[@reginadarlin596]

You don’t need to cut the shape exactly. You can cut a whole round for the dolphin and uv resin it to the whole front just make sure you have a bead of uv resin around the dolphin cavity. You’ll be doming the whole front anyway ❤️

[@glitznglitterbymichelle1]

Ah ok!! 🤦‍♀️😁

[@deebeckham4754]

Lol, didn’t see the pre-alcohol spritz. Your neighbor from across the state

[@GrannyHugs]

These turned out lovely. Try half the amount or less than half of items for each shaker, then when you add the glycerin the items will move better. It's not necessary to add water with the glycerin. The glycerin makes the items move around slowly. I have used baby oil too. I didn't top coat & the plastic film lifted up. What a mess I had.🤦‍♀️If I use oil again, I will top coat first.

[@julieusher7450]

just thought you like to know you don't have to unscrew it completely off to put the drill bit in just loosen it until the bit fits

[@glitznglitterbymichelle1]

Oh wow, I didn't know that!

[@mariagrasso4678]

I saw someone on KZbin use baby oil inside the shaker molds. No water.

[@glitznglitterbymichelle1]

Oh wow, interesting!

[@Ali-H3444]

You dont punch a hole in the resin piece. You punch the hole in the acetate film. Because you're gonna topcoat it anyway.😊

[@glitznglitterbymichelle1]

Ah! Good point. 😁

[@angeladonohoe1935]

Could you put the resin items on the middle shelf on top of the uv lamp base ,fill them with embellishments Then put the liquid also in the items then place all the pre cut plastic covers on each item with uv resin connect the top part of the uv lamp to the base and cure them all on the shelf?Just a thought ,as that way you wouldn't need to worry about about holes or no holes in each item for the liquid to go through as you would have all ready filled each item befor you put the plastic covers on befor curing?

[@glitznglitterbymichelle1]

I’m not sure I’m new to these 😁

[@angeladonohoe1935]

​@@glitznglitterbymichelle1hiya,imAnji from suffolk in the UK. I love your channel love that you add the final special touches,the reason I asked is I was looking to see if the liquid would react to being enclosed under the uv lamp ,that maybe one of your subscribers knew also .thanks for getting back Michelle 🎉❤

[@Shanenkj]

Instead of the water/glycerin mix you could use baby oil instead.

[@dawnmarie7853]

Cute shakers, but I think less is more on the fillers. I think it looks better if the insides have more freedom to move around inside the liquid.

[@gailbrown8710]

❤

[@valerierasnake2312]

Those are so cute. I can just see myself spilling all those tiny inclusions! Lol

[@glitznglitterbymichelle1]

Trust me I did 😁😁

[@valerierasnake2312]

@glitznglitterbymichelle1 haha.

[@melissabellis8854]

Don't fill your mold with water then pour the water into a measuring cup ti see how much resin it will take. Measure a cup of water (or I have a 2 cup measuring cup for bigger molds). Fill your mold from the measured water . Subtract what is left in the measuring cup from what you started with to give you an accurate measure for how much resin you will need. Then you don't have to worry about lifting up a mold full of water.

[@khowler]

That is so weird that you smell an odor. I used these for Christmas ornaments and I didn't smell anything. Grey Blue and the Blue are my favorite. Several of the ones you have said have no hole actually have a hole sometimes it's not a notch, it's an actual hole on the side.

[@glitznglitterbymichelle1]

I didn’t see any at all

[@khowler]

@@glitznglitterbymichelle1 Yeah. Some of them are tiny holes on the side in some of these shaker molds. Sometimes they appear as notches where you can see them. Sometimes the things you think are bubbles are actually the fill holes! Shaker molds are so weird. All depends on who makes them. For instance, the candy molds all have a small tiny notch in the "circle" section. Some makers make the hole very obvious and some molds you have to really look in ODD places for the holes. Sometimes they are in the creases between like a paw pad for instance or the V of a heart. I think some molds just expect you to drill a small hole, fill it with liquid and then fill the hole afterward.

[@patriciacushing7448]

Poor gimpy jelly fish ❤❤

[@glitznglitterbymichelle1]

😁

[@budgetmerch]

Was Don whispering in your ear when you were drilling the hole at the end there? Sounded like I heard a quiet whisper. Fiddly stuff. 🤣🤣

[@glitznglitterbymichelle1]

No lol maybe his tv in the other room 😁😁

[@budgetmerch]

@@glitznglitterbymichelle1 Probably so - my headphones are pretty sensitive but the family is in bed when I watch so I have to wear them. Not a problem; I just heard it and wondered.

[@johnibrazzell764]

🎉🎉🎉🎉🎉🎉

[@LauraCastro-df1cn]

❤😊🥰

[@jeanettewestgarth8271]

They aren't moving coz they are a little too full of things, try a bit less next time. They are super cute x

[@bonny9680]

Does this mean you're a mover and shaker? X❤

[@glitznglitterbymichelle1]

🤣🤣🤣

[@NancySimonds]

Remember the s ow globe you made and put too much glitter inside. I think the filled ones are really cute, but, I think you filled them up too much. Too bad the pink wasn’t glittered, but otherwise they all looked just darling.❤

[@KerryMelfi]

Ready-made glitterized resin: I wonder why they asked you to try that out? What are the odds you're going to like glittery resin? (Don't bother looking up "glitterized" because I just made that up.)

[@glitznglitterbymichelle1]

Lol right!!! And of course I’m the one that noticed no glitter in one 🤣🤣🤣

[@roxannaalbert861]

Love watching you, but I like think you are putting to much stuff in your shakers. At least that what I’m seeing thought the camera.

[@BoredWifesProductions]

They are super cute!❤❤

[@kateivester3122]

Those are super cute

[@TamiTatro]

❤

[@Tami-wo8le]

❤

[@Tami-wo8le]

❤