Glock 20 MOS Gen 5 - 10mm Perfection?

[@vmpgsc]

Yep, G20 Gen5 is what you want if boring reliability and accurate shots are your jam. Love mine.

[@AmmoLandTV]

100% Agreed. The only thing I would change is the optics plate to a direct RMR mount. Other than that, I'm totally happy with it.

[@lamuffbumpers7674]

​@AmmoLandTV what optic did you have on it ?

[@smithguy9109]

@@lamuffbumpers7674 he’s got a holosun on there possibly the 507k but I can’t tell which model.

[@lamuffbumpers7674]

@@smithguy9109 yeah I'm trying to figure out what one I want to put on mine.. lol

[@wvdave771]

Mines been flawless so far

[@ADRIAN65078]

Maaaaan, HANDS DOWN this is one of the best, if not...THE BEST G20 G5 reviews that I've SEEN!!! Crystal clear and high resolution vid, clear speech and shit tons of shooting!!!! it doesn't get any better guys!!!

[@animalsoul444]

Shoot 9 and 40 for years by accident i tried a G20 Gen 5... sold everything else, it lays so good in my Hand

[@fallenpastabean804]

Great production, concise, and interesting to watch. Hope you guys stick around and make it to mainstream guntube!

[@imanibarnett7513]

Seriously best review out. Very well done. I’m proud of this review.

[@VincitOmniaVeritas7]

10mm is a great caliber to have a compensator on. I’m still disappointed that Glock never offers a handgun with a factory threaded barrel, forcing you to buy another barrel.

[@ShooterMcGottem]

They used to offer threaded barrel models but the models they make have metric threading that isn't common in the US and therefore were never good sellers in the US market.

[@dondelchulia3189]

Agreed it’s annoying, but it does help the after market

[@jaybuzzin3900]

Glock 17c

[@jaybuzzin3900]

Built in compensator

[@VincitOmniaVeritas7]

@@jaybuzzin3900 but the G17c is chambered in 9mm. As far as I know, they never did a G20c or G40c.

[@karledgren8150]

I still am shocked at only 31k followers your way better than most on this channel

[@AmmoLandTV]

Us too. KZbin just hates our added politics.

[@HaroldGodwinson24]

@@AmmoLandTV have you thought about adding a Rumble channel to increase your audience? You have a great channel.

[@PopsGunChannel]

I Just got my first 10mm Gun 2 weeks ago (The G20 Gen3) I bought it used for $450 but it was never fired After taking it to the range and finding out that it's mo more recoil than my plethra of .357mag revolvers (Love me a wheel gun) Yesterday I found an unfired used Ge29 and had to have it. I am in love with 10mm now moreso than .357 because I get to carry more than 6 rounds (.357) Would love to see some gel test about your new 10mm G20 !!!! I plan on getting the G40 and the B&T USW frame as I beleive that 10mm is a great round with very little recoil ! Regards, Rick (subbed)

[@smoothshot8925]

So u bought it “used” but it was “never fired”?? never knew it was possible to buy a used unfired gun lol

[@timdoxrude4585]

Just got one and love it! Great purchase!

[@BeyondConventional]

I was first on KZbin to test the G20.5 and it hasn’t misfired yet!

[@mikerobinson8734]

You comment this on every video 😂

[@BeyondConventional]

@@mikerobinson8734 Only the Gen 5 ones most people have good luck with it and I watch all of them! 😂 😂 😂

[@mikerobinson8734]

@@BeyondConventional I own a Gen 5. Same result as all previous Gen

[@BeyondConventional]

@@mikerobinson8734 I know you do I’m going to get that KKM barrel like you have.

[@mikerobinson8734]

@@BeyondConventional Haha 😂 I didn’t even know what comment I was responding too.

[@seaocean4868]

cant find holsters for the dango thing... at least with x300

[@OBrandt-i5c]

I have a couple of G40s with RDS (the bigger brother of the G20) and they certainly meet my needs !

[@bigoz7]

Cool vid thanks for sharing !

[@mtharri]

I changed to a stainless steel guide rod on my G20

[@Kyrodan022]

Just got one..but also just got a smoking deal on a G40..dont know if i needed the 20..but its not much bigger than my 19x..so may replace it..just a longer barrel..more knock down power..oh yeah.

[@kristijanmedved6066]

How does it compare to xdm 10mm?

[@roosterfish3248]

I bought the xdm elite 10mm a couple of months ago. The new M.E.T.A. trigger, or whatever they call it is terrible. I wish I would have bought the glock. The xdm is accurate, and has functioned well, but I like my glocks better.

[@samaelmartinus3273]

Far more superior. Runs right out the box. Glocks 10mm are known to jam alot unless you upgrade barrel, or spring.....f that.

[@GunsNGames248]

Xdm trash

[@thereisnoneRighteous-but-GOD]

Great video, thank you. So can you now use lead ammo since the barrel has been updated?

[@mojo4376]

Apparently not….ughhhh

[@AndracadriceCrawford]

What's the best ammo for the G20 Gen5 10mm?

[@Gun_Shortz]

Underwood ammo runs great

[@Gun_Shortz]

It’s a little pricey though

[@David-er1cy]

Underwood for sure

[@JohnB-dr8sk]

HPR is good though not as powerful as Underwood. The Federal 180gr Trophy Bonded is actually full power ammo and shoots really accurate. For cheap shooting (though really low power) grab S&B FMJ. Probably the cheapest FMJ around but shoots well for practice.

[@riiddisbuk2496]

Smith and Wesson M&P 2.0 10mm with built-in compensator and ported barrel is my favorite 10mm.

[@happysanchezjr.9162]

No one cares

[@riiddisbuk2496]

@@happysanchezjr.9162 You don't care and that's good since I didn't ask.

[@efm2169]

Where did you get that extended mag?

[@EWDEEZY313]

???? Enquiring minds would like to know bc it looks amazing

[@LetsgoBrandon2023]

It's the KRISS USA MagEx2 Extension Kit for Glock 20 10mm Auto +18 Round Capacity

[@LetsgoBrandon2023]

​@@EWDEEZY313 see other comment

[@karledgren8150]

Yup lucky me I live in New York I get 10 Rounds plus 1 please no jealousy please

[@izzyiz810]

I left NY & moved to TX. Problem solved. Lol.

[@karstgeo7290]

Just picked up one of these to take to AK. Buffalo Bore hard cast ammo. Great shooting pistol.

[@sambo6591]

You know wait the recoil spring is on the gen 5 glock 20

[@Christian-o5c7b]

you should check out the G 40

[@henocasf]

those gloves look cool

[@davidshaffer-e8n]

I'm not going to get rid of gen 4 Glock 20

[@Joe-oo3xv]

Anyone carry this concealed on the regular ?

[@supersixbravo1610]

Oh for goodness sakes, these youtubers go on and on about 10mm recoil. Its such a load of nonsense. 10mm aint no thing. If you've never fired it before, dont worry about it. Its not nearly as heavy kicking as these guys like to pretend it is. They're really over exaggerating.

[@animalsoul444]

i can confirm this recoil is nothing 357 mag for exmaple is way way harder

[@bri13wvu1]

Yes probably in large part cause 357 don't have a recoil spring and reciprocating slide mass to soak any of it up. It's all direct right into yer hand

[@GunsNGames248]

True

[@frisk151]

This has been "my girlfriend" for a bit now. Great coverage..

[@Berserkable]

Just can’t get into Glocks. I’ve also been hearing that Glocks new G5 barrel isn’t as reliable with the redesigned feed ramp. 10mm perfected is the FN 510 imo. SIG would be up there too if the damn mags weren’t iffy. My M&P10mm has been 100% AFTER sending it in for warranty. I believe S&W fixed the early issues. The M&P grip texture is a bit too aggressive and destroys my hands with full power 10mm. The FN has been proving perfectly reliable and has Fans fantastic optics mounting system, great ergos, surprisingly good trigger compared to 509s and typical FN quality. Now if HK would just make a 10mm USP, HK45 style 10mm or VP10mm. Walther PDP 10mm built a bit heavier would be awesome too.

[@Sayplatypie]

Hey, I was curious? What handgun is thii… GLOCK 20 GEN 5 MOS.

[@davidshaffer4664]

I got a gen 4 10 mm and I'm not giving it up just to get a gen 5

[@stepanbandera5206]

Save up your allowance, spend a little more and buy something made of Steel.

[@thecarcastleable]

stay away from those mags..sgm yes, Kriss hell no! they suck so bad

[@mikerobinson8734]

Hate the Gen 5. I bought one and quickly sold it for a Gen 3 20. No aftermarket support. No one makes a recoil spring for this pistol. No aftermarket barrels. (KKM G29 extended length barrel will work) But there is a .10 thousands difference in the lug. I prefer finger grooves. Mag well is useless and adds bulk. Brass ejection is extreme and irratic. The slide has a lot of meat taken out of it towards the front and the slide cutout is replaced with a plastic insert. The slide is significantly lighter than previous gens. I think Glock took a huge step backwards with this one.

[@JohnB-dr8sk]

Yeah, the Alaskan Ballistics Channel had initial problems with theirs but apparently it broke in and then was reliable. It's hard for me to trust nearly any firearm built since Covid because the QC of all manufacturers has a taken a dive. Austrian made Glocks are still probably the best even with the Covid lockdowns and affect on labor, but the Gen 4s and Gen 3s were made when QC was higher and they are 100% proven guns.

[@PwrthrupN]

​@John B it's hard for me to believe that there is something out there called an "unreliable glock", until I myself witness a few videos of exploding glocks and failure to feeds, Alec Baldwin (allegedly) blows away half his crew on his new movie set while never even touching the trigger, and Hickock 45 does a video where a pot smokes him.

[@ShooterMcGottem]

My Gen 4 G20 is the only glock I ever owned that ever had malfunctions. Hornady hollow points would always misfeed for some reason. I have since upgraded to the Gen 5 and I was super happy and surprised. It feels like the Gen 5 has less recoil than the Gen 4. I am very surprised people have reported problems.

[@JohnB-dr8sk]

@@ShooterMcGottem Did you send your Gen 4 back to the factory?

[@ShooterMcGottem]

@@JohnB-dr8sk i sold mine

[@taintrip]

So many of you larpers have no recoil control

[@fredsmith8498]

The Glock 40 is better. Longer barrel and better ergonomics

[@hurricaneaquatics]

And very hard to find, at least locally.

[@mikerobinson8734]

You don’t gain much with the G40 imo it’s actually pointless. The G40 is much heavier and longer/harder to draw quickly. I put a KKM barrel In my G20 stock length and the velocity difference is only 30-50 fps. The G40 wasn’t much better in terms of performance over the 20. With a red dot on the 20 accuracy was much better. I sold the G40.

[@jasont8292]

I have to disagree. My gen 5 20 is a much better experience than my g40, but that is just me

[@hurricaneaquatics]

I have a Gen 4 20 and a Gen 4 29. I will still pick up the 40 when I find one because they look very good. The little bit of added weight and the extra barrel length should help a bit on accuracy. Agreed, it's not a big difference, but I don't think anyone is going to carry the 40 as a daily protection piece. I could see it in a shoulder holster setup, but definitely it an apple dix carry weapon, lol.

[@mikerobinson8734]

@@hurricaneaquatics If you want velocity , buy a KKM Barrel. A stock length G 20 KKM barrel will produce the same velocity as the 6” Glock barrel with the added chamber support to boot. If you want accuracy, have your slide milled for $100 and ad a red dot. A dot is far more accurate than any length iron sight radius. You end up spending less than a whole other Gun entirely with much better upgrades. The added weight up front actually adds recoil IMO as there is more reciprocating slide mass. If you want less felt recoil KKM sells a threaded barrel with a 4 port compensator. I run both my 29 and 20 with a comp. Completely flat shooting.

[@BlueberryStinkFinger62]

I'll stay with my 9mms with Buffalo bore 147gr +p hard cast and seismic 185gr Rounds..I'm good 👍

[@happysanchezjr.9162]

You would get laughed at in bear country.

[@patmaloney1140]

Love my Glock 40. But I'll take my M&P 10mm over a Gen 5 G20.

[@Phiakyu]

Non fully supported chamber and a plastic guide rod in a 10mm pistol??? Garbage!!!!! Accident waiting to happen....

[@paisleyprince5280]

Jesus all the videos for the gen 5 20s are the same. Booooring

[@AZTLANSOLDIER13]

"Dangerous game" what are we talking here? Wolves dont attack people (i know thats hard for the American male to admit but do your research) mountain lions very very rarely do (and they are relatively small animals, males rarely exceeding 150 lbs), alligators dont stalk you on land (just dont walk your little dog down by the water at the Florida subdivision pond), black bears are little threat. That leaves us Grizzlies, which outside of three or four states including Alaska most Americans will never encounter. And an angry full size adult grizzly? I would never trust a 10mm pistol to put one down. Their skulls and bodies are ridiculously thick. There are stories of grizzlies shacking off hunting rifle calibers

[@rynerenzaglia8006]

I live in MN, wolves kill dozens of grouse hunting dogs every year.

[@rynerenzaglia8006]

Also rutting moose are incredibly ornery creatures

[@josiahwyncott7519]

Yeah, who ever heard of a person being attacked by a bear or moose, or other large game before? That is an urban legend!

[@TheBandersnoot]

Good grief, so much genuflecting before the altar of Glock! Give me a break. 10mm fans (of which I am one) have asked Glock for an updated mod 20 for years. This "new" mod 20 comes out only after S&W, Sig and Springfield all brought out new 10mm models, and shooters love them. Finally Glock brings out a completely unsurprising pistol, just like every other Glock. A brick in the hand with a weird grip angle. No thanks.

[@AmmoLandTV]

I want an SF model with MOS and a threaded barrel personally. Yea I know 10mm sucks to suppress, but it's still cool AF.

[@JohnB-dr8sk]

Dude, have you done any research lately? Most of those other 10mm's are experiencing lots of problems now. Glock doesn't change much because it's actually really hard to make a gun as reliable as theirs for the money they charge, and any changes could result in the guns becoming less reliable. Reliability in a gun that is supposed to stop a charging bear is NUMBER ONE. Not some stupid add-ons or changes that make the gun less reliable but "easier to shoot."

[@Phiakyu]

XDM elite is hands down the better 10mm...fully supported chamber, no plastic guide rod and a better quality built pistol....Hollywood is responsible for Glocks popularity, not the actual firearm which is cheaply made with inferior parts and materials...besides the unsupported chamber and guide rod, the only reason Glocks r so reliable is theier very loose tolerances of the chamber...look how loose the cartridge is inside the chamber, thats why it feeds and extracts so well.....its the ak of pistols...loose tolerances wise....the ak is not prone to exploding in your hand when firing...

[@NINJA_INVESTORS]

Glocks can be modded if you don't like some of the parts bro

[@GunsNGames248]

Xdm trash

[@happysanchezjr.9162]

Dude, youre a joke.

[@rockybalboa2526]

HEY JIM, YOU DO KNOW THAT THE 45 ACP SUPER ROUND, IS SUPERIOR AND MORE DAMAGING THAN THE 10 MM DONT YOU? AND IT STILL SHOOTS A LOT EASIER THAN THE 10MM! ( WITH OFCOURSE THE ONE ONLY GLOCK )

[@Phiakyu]

Who buys a new pistol knowing they're gonna replace the barrel,guide rod etc...to make it better??? I wouldn't buy any gun that needs replacement parts to make it a good gun....that's just stupid imo....it's ok....Glocks r junk from the factory....wise up people...

[@anthonymack6412]

“Junk from the factory”? About 65% of law enforcement agencies in the U.S. use a model of the Glock pistol as their service weapon. Who says that one must change any parts at all “to make it a good gun”? The pistol works fine in factory configuration. Changing parts is strictly personal preference.

[@jpg_sig10]

If memory serves, the Gen4 Glocks had a lot of problems when they were introduced back in 2010. Glock eventually made them right. On 31May2023, "hickok45" reviewed a new Gen5 Glock 20, during which it malfunctioned three times in less than 10 minutes, while he was shooting Underwood Ammo 10mm Auto 200 Gr JHP. Glock Perfection isn't. kzbin.info/www/bejne/mnqcmH1soqusaM0

[@animalsoul444]

no malfunction in 1045 shoots so far with gen 5 no idea whats the problem was at him

[@jpg_sig10]

@animalsoul444 Since late May 2022, I've run 1,605 rounds of 10mm Auto ammo through my S&W M&P 10mm M2.0 4.6" pistol, enjoying 100% flawless performance. Over 600 of these 10mm Auto rounds were Buffalo Bore and Underwood ammo, ranging from 140 Gr Xtreme Penetrator up to 220 Gr FN HCL. She's proven to be a highly accurate, very reliable pistol, with great ergonomics, and she's very easy to shoot well. In fact, she's the most reliable 10mm Auto pistol I've ever owned, and she's replaced my Gen3 Glock 20SF as my wilderness trail biking / hiking / camping large critter self defense platform. Good things! 👍

[@deadwood75]

His test/loaner G20 came with ten round magazines, so he used some older high capacity mags from his other G20s. In Part 2 of his test, he used the Gen 5 magazines that came with the loaner G20. There were no malfunctions.

[@24and79]

I would rather have 357 sig

[@mikerobinson8734]

Why? 10mm is a way more powerful cartridge.

[@izzyiz810]

I have both. .357 sig penetrates slightly deeper. 10mm bigger holes. Both are great. Fanboys suck.

[@mikerobinson8734]

@@izzyiz810 you’re delusional if you truly believe.357 Sig “penetrates deeper “ By comparison the heaviest load for the .357 Sig commercially available is a 147grn with a sectional density of .166 traveling @ 1250fps Vs A 10mm 220 grn with a higher sectional density of .196 traveling @ 1200 fps. Basic logic and physics favors the heavier and denser projectile traveling at nearly the same velocity will obviously be more destructive and penetration will be much much deeper let alone more mass to the projectile will be less affected/deflected when encountered by hard barriers such as bone. Another similar comparison would be my personal carry load, a 155grn 10mm with a section density of .138 traveling at 1550fps yielding over 826 ft lbs of energy Vs .357 Sig 125grn with a sectional density of .141 traveling @ 1425fps. With a muzzle energy of 563 ft lbs. Bullet mass energy and velocity favors the 10mm again. Your logic is flawed to say the least.

[@izzyiz810]

​@Mike Robinson Blah blah blah... Fanboy delusions think numbers say everything. Underwood 125gr consistently chronos at 1500+, for one. For two. The tests are documented that the 357 sig is a hard barrier penetrator round that is equal or marginally better at penetration. Of course the 10mm will be more effective at dumping more energy. But 357 sig is no slouch. Plus you can carry 14/16 rds of .357 sig in a 9mm sized pistol. Ipersonally carry both, plus I carry .357mag. I use them and they ALL meet my expectations. If you need to worship one over the other because worshipping your creator is NOT good enough then so be it. kzbin.info/www/bejne/iaHPhoudaK6Wldk

[@izzyiz810]

@Phillip Smith I agree. It's why I have both. 9x25 just just hard to find ammo and expensive.