GLYOS- The coolest figures you may have never heard of! | Jcc2224 Review

Onell:
onell.store/
The P.O. box is OPEN! Send me fan mail! It'll all be opened on camera! (Note- Nothing will be sent back unless previously arranged, e.x. a review sample)-
Jcc2224
P.O. Box 42041
Cincinnati, OH
45242-9998
Follow my social media for updates on the channel, and MEMES:
Facebook-
/ jcc2224
Instagram-
www.instagram....
Twitter-
/ jcc2224
FAQ:
1- Where do you get your figures?
Everywhere. Literally everywhere. Walmart, Target, Toys R Us, Antique Malls, Thrift Stores, Flea Markets, eBay, Amazon, Facebook, Online Forums, Friends, etc. This video details the answer. • FAQ- Where Do I Find/B...
2- Can you review __? Can you make a ___ video?
I do appreciate requests, suggestions, and video ideas, however, I get so many that it's impossible for me to keep track of them. It's okay to ask, but I may not be able to get around to it.
3- Can I have ___?
I do not and will not sell or give parts of my collection to those who simply ask for something in the comments of one of my videos.
4- Can you check out my channel?
Sure. I tend to check out people's channels if they're active on the channel, or seem like they may be interesting. However, I'm very picky on what I subscribe to, and I just don't watch every kind of video just because someone asked me to. Same goes for shout-outs, I cannot fairly shout-out somebody for no reason other than they asked, it would be unfair to anyone else who were to ask and I would be unable to do so. A shoutout from me will not gain you much viewership or subscribers.
Awesome profile picture made by Sesh Monkey on instagram! Check him out and give him a follow!
/ sesh_monkey
Editing Software- VideoPad Professional v4.40
Outro Music-
Binärpilot- Norland
Norland is used under the fair use time constraint of under 10 seconds of usage, and does not diminish the value of the original work. Check out Binärpilot!
/ binärpilot - topic

[@masterqw1]

There's actually a build you can make with those big circular pieces called the Phase Defender (glyos wiki has a whole archive of different builds) which is just made out of those accessory sets. It consists of 2 sets of Phase Arm bits, 2 Sets of Axis Joints, and 2 Hub sets. Anytime i buy glyos stuff im more in it to make those combined builds since they remind me of the combined builds Lego use to make instructions for when Bionicle was still around.

[@Voolee2196]

Love how these little guys are getting the recognition they deserve!

[@cartersmith2315]

The crafman made a gif about them and it was a good vid and so was yours

[@grantmeunierrubytarnprime874]

Glyos are pretty cool little toys. I’ve been tempted to to get a few especially the callgrim.

[@farminglittlepeople9623]

I think most collectors like to collect at least one line that is completely different than anything else! I know I do!😁👍

[@Sleesus]

I was actually going to make a review of some of these I got recently but never got around to it. Finally got a few of them recently, the first was an ebay scalper listing that the seller surprisingly kept marking down till it was the original item's price before I saw there were new ones actually in stock on the guy's site. Some of the cheaper "blank" solid color kits I wanted sold out before I could get them but I've got some of the things now, including one blank that comes with the head of a different figure as a bonus, weirdly. I really kinda want to get more of these sometime because the amount of combos out there are wild.

[@user-tb3wq9hf2e]

Check out outer Space men and power lords! Both were also rebooted as GYLOS figures.

[@efsilva86]

Hell yeah Vectorman!

[@Doiboy35]

This system looks pretty cool. Not so hot on its unreliability or the aesthetic of the figures themselves, but that's just me.

[@JWheny]

Different glyos companies have their own aesthetic for their glyos figures. Some examples of glyos companies other than onell design are callgrim, godbeast, nemosfactory, battletribes, toypizza, toyfinity, zullbeast, spacedoutdesign, and more.

[@Doiboy35]

@@JWheny I'll have to take a look.

[@jackburton2565]

Put water in a bowl and stick in microwave. You dont want it too hot to put fingers in but hot. Dump pieces in the water. Another method is a heating pad. This makes all pieces MUCH easier to connect. They're extremely durable. Another tip is to grab a cheap "Snap Ship". These come with a little plastic tool that works good for glyos pieces.

[@Jcc2224]

I would never ever put my toys in a microwave oh my gosh. lol I'm certainly aware of how to heat up figures to soften them, I normally use a hair dryer, but it's unfortunate that it's not easy to pop and swap the parts without any intervention like that.

[@jackburton2565]

@@Jcc2224 not the toys just the water smh...

[@jackburton2565]

@@Jcc2224 much much much easier and more efficient than a hair dryer. After a while you will find the pieces are easier to connect. If they become loose you can heat up the pieces in the heated up water(not put them in water then in microwave) and take the peg end and push it against a hard surface. I mean you dont want to go crazy but this will shorten/widen the pin so it fits more snug in socket. I have a large collection of these from almost every lime they make and very very few issues. Ive seen 1 pin break and I rip these things apart and build often.

[@Jcc2224]

Oh phew. My bad I totally misread you, I legit had someone else suggest I put the figures themselves IN the microwave so I think I jumped to that right away! lol Yeah hot water, either boiling or microwave, is good for really stubborn stuff, but if it's a small little thing I typically go for the hair dryer! Maybe if I heat up these glyos figures and work the pegs a bit they'll be easier to work with overall!

[@Moioioi]

Just picked up some of their bit figs, thanks for the vid may pull the trigger on this guy soon 😎

[@lionelwenwen5322]

I only got two action figure moff Gaiden and Ig 11

[@Lightbulb.g.a.r]

I need to get some of these I love The bandanna

[@cobaltgreen1138]

Would you say 15-23 dollars is a good price for black series?

[@tonywilkinson8009]

I love your video

[@ebnrong]

You need to heat up your pieces before putting them together. It makes a world of difference, and it doesn't destroy your thumbs

[@Jcc2224]

Yeah but needing a hairdryer every time I wanna play with these kinda sucks

[@everettmiller7738]

Heat is a customizers friend

[@Jcc2224]

I know for sure heating these up would make it easier to pop the parts, but I feel like it would be so annoying to have a hair drier with me every time I wanna play with these... lol

[@everettmiller7738]

@@Jcc2224 I've heard some people suggest a heated towel, leave the parts on it while popping and swapping. Doesn't seem like the ideal situation but it does work.

[@chudbabies]

i guess there's a kid inside

[@Dreamyblue101]

This is so cool and awesome

[@user-xe5jh2dg8e]

this is so cool!

[@lionelwenwen5322]

Jcc2224 i like custom clone can you do it again pls

[@The8BitChampion]

Given how long these figures have been around there really hasn't been much innovation in there design. And they tend to be pretty expensive to for what they are.

[@cobaltgreen1138]

Is it "glyos" or "gylos"?

[@Jcc2224]

It's glyos. My bad, changed the title! lol

[@qxillanote9952]

Yo

[@wanderingoryx3710]

Heat up the plastic

[@Jcc2224]

I mean obviously I could, but imagine always needing a hairdryer with you every time you wanna play with your Glyos figures...

[@FrogsAmok]

@@Jcc2224 I use a hairdryer everytime haha