gmc Sierra dual color LED running light/blinkers

[@ChrisErvin]

did you install the resistors? that will cure the fast blinking. if you installed them its possible you tapped into the wrong wires, go back through and check. as for your done lights and mirror blinkers, its possible you could have blown the fuses. check the corresponding fuses in the fuse box. if that doesnt work, try taking the lights out and see if they work again.

[@EliteTxn]

1st time I did it, I was under a carport & it didn't work, then I did it in under the sun & it worked, thanks.

[@ChrisErvin]

i would assume it is doing that because the resistors could be tapped into the wrong wires. the dual color LEDs really throw the whole system out of whack if the resistors aren't hooked up right. i wish i could tell you a sure answer, but i dont have the mirror signals so i cant tell you...

[@ChrisErvin]

6K HID. in person they are a tad off in color from close up, but from about 10-15 feet away they blend in

[@JTrump23]

OK thanks man ill just check it the left side is working great its just that one side ... would it also cause my dome lights not to work . It only works when I push on them directly to work ... it happened like an 1 hour later installing the blinkers

[@ChrisErvin]

i would assume youd have to buy a special LED that is designed to have 2 colors when blinking. mine are only one color for each function.

[@Ryno59CTD]

a couple questions, 1) does the white light take the place of the DRL? or do you have to turn on the parking lights to activate them? 2) when in drive at night, blinker activated, do they flash white, amber,white, amber? or is the white off until the blinker is off?

[@ChrisErvin]

1) im not sure about the DRL function, i took my DRL fuse out a long time ago, i would assume they would be on. 2) when using the blinkers at night, the white does not show up until the blinkers are turned off.

[@JTrump23]

Is the front blinkers connected to the mirrors because the white lights stay on and the amber lights don't turn on or the mirrors it only blinks fast with the tail lights Thanks

[@ChrisErvin]

no, theres 2 screws under the hood and another screw behind the bumper. you can get to the 3rd screw by peeling back the fender liner. then the houseing just popps out

[@JTrump23]

What else would I need for the l.e.ds blinkers .. I have the same truck

[@EliteTxn]

Do you know how to turn off the 2 yellow running lights? They come on with the headlights in the day & night, & I hate it

[@JTrump23]

What's up man I just installed my lights but after an hour I noticed that my dome lights wer not working and my front right side not blinking only really fast sound... any advise? Oh yeah and the right side mirror not blinking either thanks

[@JTrump23]

Yeah it was the fuse #5 (dome lights driver side blinkers) but as soon as I Turner on the emergency lights it popped again ... would u know why?

[@ChrisErvin]

maybe you pushed the dome light override button? if that does not work, use your DIC buttons and go to the "exit lighting" option and make sure its set to ON. if neither of those work, try removing the blinkers (not the resistors) and see if they work again

[@rosskey1]

How'd you get to the bulbs you had to take the grill off then take the headlights out? Idk where to start to change em out

[@ChrisErvin]

there are 2 bolts on top of the headlight and another you have to peel back the fender liner to get to. you dont have to take the grill off.

[@JTrump23]

Have u had any problems with ur l.e.d lights? Or blinking ....

[@JTrump23]

How much did u pay for all four and what wire would I ha e to tap in... thanks

[@ChrisErvin]

all you need are the 4 bulbs and 4 resistors. the bulbs plug right in and the resistors just need to be tapped in to the wires i mentioned

[@oscarmustangcobra]

Do you have 6k or 8k hids? And the turn signal are they white or cool white?

[@elkonfleis]

Would you have the wiring schematic to where the resistor is wired

[@TheHeppster19]

Could you maybe email a pic of the resistors on your wires ?

[@albertgurrola7843]

for the daytime running lights did u use a load ressitor?

[@JTrump23]

Were can I get those lights I have that same truck and how much. PS. Its a pain to remove those lights

[@abimaael]

A what kind of led u have s a single led or the one has a lot?

[@JTrump23]

Sup bro just ordered mine with strictly Hids $115 for 4 ... got the same ones .. how do I wire the resisters?

[@ChrisErvin]

you can leave the passenger side housing in, you just have to move the airbox. its easier to take it out so you can get to all the wiring

[@vinceisbalin100]

what wire did you splice to put the resistor on? without the resistor it blinks really fast.

[@ChrisErvin]

VinceisBalin ktm look behind the headlight and don't the 3 wires that go into the bulb harness. should be 1 black wire and two colored wires (on of the colored wires will have a stripe on it). wire the positive side of the resistor to the solid colored wire, and the negative side to the striped wire.

[@taulavaulol]

Hi do u need resistors for that?

[@TheHeppster19]

Oh I have 5 wires on the top and four wires on the bottom . I'll try your way to see what happens, thank you

[@Chubby672]

Whats the LED Part number you used?

[@ChrisErvin]

resistors arent necessary for them to work, but if you do not have them you will get the "turbo blinker" effect

[@HRO148]

what # HID are you using? they match up pretty nice with the LEDs.

[@Slowz-ed8nv]

Can I find them on eBay or anywheres?

[@texasbraves]

I'm having trouble with mine white light stays on when I turn my blinkers on .. how can I fix this ??

[@mariosaber7118]

Hello, did u find any way to fix this problem because it's also mine

[@TheHeppster19]

Which wires did you tap into for the load resistors ??

[@ChrisErvin]

there are 4 wires going to each bulb (2 for constant, 2 for blinking) each resistor must be tapped into the positive and negative wires that control the blinking function. if my memory serves me right, you should tap into the 2 outer-most wires

[@ChrisErvin]

try putting in a bigger fuse. if it still pops, there must be something funky happening with your wiring

[@ChrisErvin]

do you have a silverado or sierra?

[@ChrisErvin]

i cant seem to find the picture of the correct wires to tap into so i will try my best to describe it to you. there are 5 wires coming from each set of running lights/blinkers. 2 green, 2 orange, 1 black. tap the positive wire of the resistor into one of each of the orange wires, then tap the both negative resistor wires into the black(ground) wire. do that on both sides of the truck and you should be golden!

[@taulavaulol]

Where did u buy those led?

[@trim7777]

You had to pull your bumper off to get them out or what

[@ChrisErvin]

You have to go in the fuse box under the hood and remove the DRL fuse

[@ChrisErvin]

for all 4 bulbs and resistors it was around $100. if you need a pic of what wires to tap in to i can email one to you

[@ChrisErvin]

6k HIDs. Cool white LEDs

[@carlosluque258]

do you have any other LEDs from them on your truck?

[@ChrisErvin]

yea, my reverse lights and license plate lights

[@ChrisErvin]

removing the head lights is kind of a pain, compared to my old 2001 sierra. theres 3 bolts and 2 clips holding them on, but one bolt is only accessible through the bottom of the bumper and the 2 clips are a pain to get off. the next pain was figuring out which wires to tap in to for the resistors, i tapped into almost all of them before i found the right ones. if you go to facebook(dot)com/StrictlyHIDs and like their page they will give you 30% off of anything you buy.

[@trim7777]

To get the bulbs in you had to pull the headlight completely off the the truck

[@Slowz-ed8nv]

How much are they??

[@ChrisErvin]

for all 4 bulbs and 4 resistors it was around $100

[@trim7777]

I did but a bracket was blocking the turn signal bulbs I guess I will just pull them out thanks agian

[@texasbraves]

I want these .. can I have a link or a number so I can buy them.. please and thanks

[@StrictlyHIDs]

www.StrictlyHIDs.com is the website he got these lights from

[@typ8723]

HIDs are gay, tho

[@dmitriyl9391]

That's Sick!

[@JTrump23]

OK thanks bud

[@trim7777]

Okay

[@ChrisErvin]

6 ohm

[@jubes697]

I have a Sierra.

[@ChrisErvin]

facebook(dot)com/strictlyHIDs tell them chris sent you ;)

[@ChrisErvin]

facebook . com / StrictlyHIDs

[@ChrisErvin]

909-646-0982. his name is erick, tell him i sent you and he will take care of you