Godox:

[@norfener]

3:50 I notice there's a (c) Canon communicating with a (F) Fuji flash. So would a (F) version on a Fuji X-T4 be able to talk to a Godox X1-R (C) for a Canon 430EX III-RT?

[@bjsullivan1]

Please tell me it comes with the white gloves. If not, its a dealbreaker.

[@karenkaptures]

😂

[@brunomorel3107]

How is the thermal cut protection ? 30 or 60 shots ? Like v1 ?

[@Amarnathstudio0821]

860iii me flash Ki Focuse Red Light Kese On Kare Plz Help

[@cflyckt9212]

Who's the marketing genius? White letters on white gloves? Really? Nobody saw the video before publishing? Yes.. perfect! Being able to read the new features on the video is just what they are expecting!

[@kerrybrookCA]

I was about to say the same thing

[@BarbaraBurnham-g5b]

I couldn’t see a thing either

[@papajohn4u]

Why is the modeling light not in the head? If you put the flash head inside a modifier and/or want to angle the head-that would make the modeling light pretty much worthless!

[@Geeknology]

Exactly

[@C0WAN]

I use the led in the v1 for focus when I’m shooting in nightclubs, can’t bounce the flash that way though

[@papajohn4u]

@@C0WAN This video is about the V860III-not the round head V1. Why can't you bounce the flash if it’s on the head as it is on the V1? You can see where it hits the wall and somewhat calculate how it will bounce off the wall.

[@C0WAN]

@@papajohn4u I’m in auto focus

[@frostybe3r]

If you want that, get an EL-1. :)

[@gottgold9776]

Now tell me how to use it for HSS with Canon r6! How do I set rear curtain sync!?

[@chutichaoen3106]

*how can i use focus beam in night?*

[@Mo-mt9gi]

That was a very helpful video. Thank you for creating it.

[@multiprodukcija_]

Hi there, I just bough a brand new Godox V860III c and always stays on M, I can change anything but doesn't want to go to ETTL A, only ETTL M, why is that ? Wen I press on zoom, stays always on 14mm. My lens is Canon prime RF 35mm on Canon R6

[@kais295]

Having the same problem with my nikon z6ii. Can't change the zoom

[@kevinwilson8884]

@@kais295 Defuser flap is not pushing micro switch inside so zoom is locked at 14mm

[@guybanner119]

@@kevinwilson8884 Thanks for this tip. 👍

[@MistriStudioPhotography]

@@kevinwilson8884 Thanks :)

[@franspatadungan9231]

i use flash godox v860 iii for sony a7iii camera. but I'm not comfortable using this flash on the hot shoe, which often breaks. I have done the replacement 5 times. Then another bad thing that I experienced in this flash was because of the intervention of the yellow color. I tried Canon's Godox v1, on a Sony A7iii camera and I'm more comfortable with the colors that match the settings. is there a sony v860 iii upgrade that no longer interferes with color?

[@franspatadungan9231]

no response. it looks like the sony v860iii flash is not good. maybe it's good I will make a separate broadcast to get an answer in the form of a solution. bottom line this is not good.

[@aerodime7881]

@@franspatadungan9231 what do u mean? wahts hte issue?

[@glebsfilonovs2191]

Best ever flashlight, got 3 mk3 and one mk2 from where I started to use only godox stuff. Looking forward to get few ad200. Haven't done any research yet, but I hope you got continuous lights too as I need few :D

[@diegoviecili8888]

I’m not sure if I am doing something wrong but shooting with canon rp and my V1 the V1 was never able to recognize the length of my focus automatically I was leave at 50mm and goes on Is there any setting that I’m missing guys? And still can’t understand why this upgrade as almost Everyone prefers a rounded head now

[@k3n12ock]

Been wanting to start with flash photography and bought this Godox V860III-N instead of the V1. Hope I made the right choice!

[@asantatrafm]

Is HSS available off camera ?

[@njrivetelite]

How do I set rear curtain sync with Canon R5/R6?

[@chaseyponny5265]

I cannot setting external flash in my sony a7c ? No indicator flash in my camera. Can u make video for explain that issue ?

[@jans7387]

Is it possible to charge the battery inside of the flash by USB-C port, without using external charger?

[@GermanViking]

This would be a nice replacement for my V860II

[@xaropevader7329]

And if I need to use it remotely (off camera) What do I need to control the V860IIIs? Never used a flash before, thanks.

[@juanjosanchez1797]

Los manuales de instrucciones, de todos sus productos, están en chino y en ingles. Por que no hacen el pequeño esfuerzo de poner también el español, que es un idioma usado en muchísimos países por millones de personas? Este detalle, por su parte, me parece muy negativo y sería bueno que lo tuvieran en cuenta, añadiendo en su web los manuales, para poder descargar, en dicho idioma. Muchas gracias!

[@TheGeocab]

Your video shows this with Version 1.1 firmware. The unit I just bought has 1.0 firmware. How do I update? Don't see anything on Godox site.

[@alessandroditommaso8180]

same problem, how did you resolve?

[@TheGeocab]

@@alessandroditommaso8180 I haven't. To be fair, I haven't looked for an updated firmware since I made my original comment.

Does it is compatible and works fine with the new Cabin EOS R7?

[@WallyMsr]

I have a Nikon Z50 and I bought this flash, I’m new using flash, can somebody give a link of a tutorial for beginners using this flash on Nikon?

[@AymanVideoservices]

Hi I got V1S which I am using with sony A7siii camera but unfortunately it does not pre fire in TTl auto mode which is very annoying. Can you help. Can you update the firmware

[@ronaldruano3980]

Is it ttl compatible with canon 5dmark iv

[@TurksBoys]

I just got my godox V860iii today along with the Xpro trigger for my canon m50. Everything seems to be fine but for some reason my zoom won’t adjust at all, not from the trigger or the flash. I hit zoom and scroll the wheel but it stays at 14mm. Tried restarting it a few times and also trying to adjust it from the trigger but nothing. Any ideas?

[@roncemine4948]

if the built in flash card and diffuser is set please check it at the head and I guess it is trigger by that

[@ernestofb591]

Is it posible to mount this flash on M50?

[@DikaPratama-f9h]

⁠​⁠@@roncemine4948this is correct

[@fardadpostwalatravels]

Does the af beam work with mirorless?

[@simonekakabor9020]

The position of the led is wrong ... How will you use it in a modifier

[@robertleem5643]

I purchased the Neewer version and the flash only lasted a couple of months before it failed, as for their trigger, that wouldn't even sit on my Canon camera hotshoe, just feel off after locking it. Have returned the trigger and looking to return the flash and exchange it for this Godox version. Is this Godox version more reliable or just as bad. Many thanks for your help

[@paulofelipe8060]

Hello. Please help me to solve a problem. When I put my flash v860iii in Ettl at EV 0, it interprets as EV -1 2/3. The image is darker than if I set it to EV-1. When I set it to EV + 0.3 or - 0.3, the flash will behave normally. Is this a firmware or hardware issue?

[@nathanmontalvo4234]

Hi, can you tell me if there is a way to turn off the flash head and only use the modeling lamp?? Thanks in advance

[@NathaliaAbouSejaan]

I just got godox v860 III but its not firing there's anythink that i can do with it ?

[@RajanLakule]

The Godox V860iii is not compatible with the settings of in camera body flash control available with newer Sony camera like A7IV, A7RV. The settings called “external flash settings “ under flash settings in these cameras is greyed out when V860iii is attached on hot shoe or connected as off camera flash. Can a firmware update to V860iii be a solution to make it compatible with a very useful function within camera body to use the Godox flash to its fullest potential like the Sony Flashes? Kindly reply

[@jedi3146]

Does the modelling light automatically turn off when the flash fires ?

[@cchamp9067]

good for Canon Eos R50?

[@DeondreZink]

It’s really hard to read the instructions over the white glove.

[@joeblack7660]

The white glove obscured the actual button pressed and also made it difficult to read the white script

[@kungfuu_panda]

hi.. its very nice tutorial... when I press zoom it goes, but its not changing mm .. what I have to do ?

[@DikaPratama-f9h]

you have to put the bounce card back man if not the zoom stay in 14mm

[@manuelhedz9199]

Lo puedo usar sobre una cámara sony Alpha 7C?

[@pennyfan13]

Good job Godox, please consider making more accessories for AD200, I love how versatile and convenient this system is, like using AD-B2 with 2 AD200..etc. An AD-B2 Mark II would be nice, with more powerful LED, also some kind of protective case you can installed on the outside to protect the AD200(s) installed.

[@lizgould3325]

Need to be speed reader and super quick learner to keep up with this video!!!

[@King-ex4df]

Slow it down to 0.5x

[@lucykarimi116]

Please help my godox speedlight butrons not functioning only the green light is on but i cannot control any button and not flashing

[@joseluislopez7862]

I have an e9 firmware error with the pentax v860III flash and the firmware is not on the page, can you help me?

[@KierenSerreynKS]

None of my buttons do anything beside turn on the light of the screen. I cannot change anything. It is impossible for me to change to power of the flash in Manual mode. The +/- button does not highlight the power, so turning the wheel does nothing. Are my settings locked? Holding down the Menu button does nothing. My flash is useless as long as I cannot change the power of the flash.

[@bingjiebai8919]

GODOX MF12 is small and portable, and can make wonderful films anytime, anywhere

[@SMBOLLYWOOD23]

When it is launching in india

[@memoriesnow5334]

My zoom is lock on 14mm it's not changing is that mean my flash is faulty?

[@nkhoxigamechanger8471]

Those letters the v60iii (o) (f) (n) (c) what are they for.

[@marckluis3942]

precisamos em português o manual alguém sabe como adquirir

[@KSYota]

Please update firmware V860II-Nikon! Multi not work on Z6II

[@pspproduction]

when I’m power on the V860IIIS it's too noisy why?

[@erbterb]

The G2 launcher is non functional as the additional drivers does not install as they are from 2010!!! So I can update with G1 TT585, G3 my AD1200 pro but I cannot update my V860ii with G2. Please fix this.

[@luisgalicia5847]

Hace un año adquirí 4 flashes de estos V860iii y lamentablemente se me quemaron dos flashes no se si fui yo el de la mala suerte o el loto de flashes los hicieron mal ahora estoy dudando comprar otros dos para reponerlos pero me da desconfianza hacer la compra

[@francisyu8502]

I purchased a V860iii-N (for Nikon). Two things don't quit work: 1) Zoom focus length adjustment. The instruction says press the Zoom button, then rotate the dial. I did, but the value does not change, it is stuck at 14mm. 2) There is no instruction on how to set it for FEB (flash exposure bracketing) in the user's manual. Does anyone have similar experience or can provide some guidance?

[@thebackyardbrewer5611]

Do you have the diffusor panel on the front? It wont zoom with the diffusor panel in use as it thinks your using a wide angle lens, at least my V860II wont

[@fathuradlifauzi4284]

kzbin.info/www/bejne/pmSWc3lmfaiqbqs maybe it might help

[@TurksBoys]

I’m having the same zoom issue!

[@TurksBoys]

@@thebackyardbrewer5611 I didn’t have it pulled out but after I saw this comment I played with it and then turned the flash back on and now the zoom works! Thank you. Maybe the diffuser was out a little bit

[@karanmange280]

Hay but what if i put softbox that modeling light not usable .. can u please if possible put on top .. in nest flash virson ... Thank u

[@leometal123]

It's more like a asssist light than a modeling light to me...

[@g8212-r2z]

wow i liked it new features

[@hanily860]

WHAT IS TX ?? & HOW TO USE IT ?!

[@pavannadella2597]

Please update your Studio flashes

[@dineshkumar228]

what is the battery used ???

[@leonchen4065]

i think it is similar to the V1 battery

[@thebackyardbrewer5611]

Will it start melting the wide angle diffusor panel if i use it more than 10 times in a row like my current V860II?

[@jacquesvermeulen7105]

Unfortunately Yes... I have a mark 3 and yes it happened as I was capturing photos at paid birthday party... luckily I had my ad200pro with me which saved my ass

[@andyv6127]

The fat fingers were in the way. Using a pointer might be better. Do I read the sub titles or watch a finger pressing one of the buttons or dials?

[@mr.ankit__kr]

Can I use 200dii

[@ernestofb591]

Csn i use it on my canon M50?

[@GODOXGlobal]

Yes!!!

[@anonomus460]

My flash froze for sony. I tried using the reset function but nothing worked..

[@GODOXGlobal]

Sorry to hear that. You may contact [e-mail] via email.

[@KBTIMAGES]

I literally just bought 4 new batteries for my v850iis. 🤷‍♂️

[@cdphotography2]

And I just bought accessories for my round head. I wonder why the switch back

[@tretankuh6339]

Mark ii ???

[@nurulaulia8537]

Nice. . I like it

[@vladislavihl]

I‘m landscape photographer and have hardly ever used flashes. Now I’m going to buy one and can’t decide between the V1 and 860iii. For the portraits I usually use the 200mm focal distance, if I take a group photo I often use 20mm. For this reason I think the 860iii would be a better choice for me, am I wrong? On the other hand, if I‘m going to use my new flash mainly remotely, the restricted (28-105mm only) range of the V1 doesn’t matter much, does it?

[@StefanHillen]

Both of them will be fine. Maybe you misunderstood the coherence of focal length and zoom length of the flash head? :-) For portraits: Definitely invest in a godox wireless trigger too and place the flash near your model. Best effects take place when you're using a light modifier like a soft box. The closer the light (and the bigger the softbox) the softer it will be. 20mm will be fine, 28mm too. For group photos it depends on the amount of people. Best practice is to use a white ceiling/wall behind you to bounce your flash's light on to the subjects. The V1 and the V860iii should be powerful enough to light the scene. In both cases I'd always try to avoid using the flash directly on camera. That can lead to red eyes in portraits (especially when zooming the reflector to 200mm!). In group photos you may lost a lot of light to the edges of the group because light decreases in squares - every time the center of the group is properly exposed by the flash the sides will be slightly underexposed, no matter if it's 20mm or 28mm zoom...

[@ropiedrola568]

Compatible with X1T- C , X2T-C?

[@che9629]

yes

[@whosnext_bymeeth4745]

Price ?

[@wendystumbaugh695]

$229

[@taherzaveri8202]

Because of white glows cant read captions

[@taherzaveri9326]

White glows disturb reading dialogues

[@sparthiban2734]

Price

[@EVP31]

Im so sad Godox.. 🙏😢😭 Even if this flash only this Christmas

[@girishkulkarniphotography6040]

I have v1 and it also explode in my hands

[@papajohn4u]

Fix your Instagram link in the description please!

[@4791_]

Nice for night club photographers. I will get one.

[@cesarmackay7905]

if you use Sony, does the Red bean Focus Assitand works?

[@Yayasister57]

It would be a good tutorial if only the hand wasn't wearing a glove. It obscured a lot of the visual stuff and I had to replay several times

[@vrfilmacademy]

Cool

[@helciopeynado1]

muito bom

[@biswaruppahari1218]

great

[@memoriesnow5334]

Too many buttons to press too many settings to remember please try to make it simple as possible (welcome the ttl to manual switch) Camera is more easier than this

[@milanhugh]

You can’t get easier then this. Speedlight is not a simple device, nor was planned to be. Just a little practice and you’ll become a “master “( got it?! Master) :)

[@memoriesnow5334]

@@milanhugh yeah ik but ad200 pro is easier than this

[@leonchen4065]

its a bit easier than using the V860II/TT685 interface. The inteface on this flash seems to be similar to the V1s

[@milanhugh]

@@memoriesnow5334 this is the speedlight, you do now the difference, do you?

[@memoriesnow5334]

@@milanhugh yeah ik

[@truonghonguc2086]

Good

[@girishkulkarniphotography6040]

Godox I love your products, but please don’t make it complex and weak

[@g8212-r2z]

i like your products , but can't buy , because the price is too high

[@pedrohr7340]

I think is not useful this position of the modelling light, , when you put some accesory like difussor or so on the modelling light will be useless in that position. I think they put in this place because in the furure they will put in the Flash Screen. Make no sense the light there, I will wait to buy it until then.

[@roncockerham3569]

Is talking prohibited?

[@GODOXGlobal]

Hi! It has no sound but just subtitles.

[@afonsosantos8364]

OK, now I want my v860ii to have an "accident"...

[@wendystumbaugh695]

Hahaaaaa!!!

[@omkarsagvekar1980]

Godoy flash new flash my purchase V860 3rd generation Sony Mount

[@girishkulkarniphotography6040]

Quick release lock is just shit . It brokes just after two days of using

[@k3n12ock]

seems like a YOU issue if you broke it in 2 days

[@GalaxyMonkey808]

The music didn't have to go so hard

[@nareshmagan2295]

white text over white glove😢😂 please edit this.

[@angelisone]

Made for beginners & amateurs to use and enjoy. 1. Flashhead is not quartz 2. No Auto2 3. No HV Port 4. Overheat & shutdown & Fresnel lens meltdown

[@girishkulkarniphotography6040]

Quick release lock quality is very poor

[@steveandroidpenguin5120]

The video would significantly more useful if there was voice over. I found it a pain to try to watch what the person was doing and read the text. Also a few things need to be explained as you go.

[@JohnAvantiBK]

The modeling light is the most useless feature this flash. Why not make it a secondary flash fill light like the Metz flashes. Nobody will use this modeling light especally event photographers.

[@unique93obr]

If you have mirrorless camera...this modeling light can be useful for focusing, because mirrorless cameras can't use af assist, so I think event and wedding photographers are gonna especally use this. :)

[@Emulives]

@@unique93obr Thats it. Nikon Z camera user here. Can't use the red light assist so the modeling light is great sometimes in low light situations to focus

[@CharlesUibel]

How many comments do you people need to make?

[@yunipapa7]

White glove ........ Subtile .......

[@davemaciak4909]

Next time you do a video GET RID of the white gloves!!!!! They distract, block, and are too light in color!!! Otherwise good and informative.