Goetze RX 135 RXG New Cylinder Kit Review Part 2

This is a follow up Part-2 video on Goetze RX135 Cylinder Piston kit.
This is the link to Part-1 of this video: • Goetze RX 135 RXG New ...
I do not deal in spare parts and anyone making posts regarding sales of spares has no affiliations with me. Please contact at your own risk.

[@BrattyBiker]

Very nice video, correct tools and well detailed! Good job on fixing up the ports! They look a lot better than what you get outta the box. Now that the ports on the sleeve & the aluminum casting are matched, it should perform decently. BTW, Please add english subtitles so all of us can understand, thanks!

[@chiradip24]

Thank you for the feedback. I didn't realize about the language, appreciate your advice on adding subs, i will do it. Thanks again.

[@demonciaz3837]

Bahut jaldi aagya sir part -2

[@theblinkingbiker]

Awaited for part 3

[@vintubeable]

Nice info on the cylinder bore conditioning. 👌 Can a original bore which is having corrosion due to non-usage and exposure to moisture, be restored by this process? Kindly share the piston and cylinder service info pages of the service manual you have. Thanks

[@chiradip24]

For cleaning of cylinder you can use warm water, dish cleaning liquid with scotch-brite (green)scrubber, works best. for manual, just search rxg manual.

[@vintubeable]

@@chiradip24 Yes, Soaking in diesel and 2T oil and cleaning with brush. Ok...RXG manual. Thanks for the info. 👍

[@lingeshsaikumar]

sir, can you please share the pdf copy of the service manual, any download link if any.

[@krishnakumarc2950]

How did you chamfer it? Is it DIY or we need to take it to a reboring centre? Appreciate your input. With hand file it's hard to reach the transfer ports.

[@chiradip24]

I did it on my own. I used a rotary tool, if you search on amazon you will find a variety of them, i have a black and decker one. One most important point is to make sure you clean the block/ cylinder very nicely with scotch brite and dish soap very nicely post any cylinder work like boring or chamfering.. or else the left over grit will screw up the rings and cylinder

[@krishnakumarc2950]

@@chiradip24 ok bro. Can you share the link for grinding bit that you used for this purpose because selection of wrong bit will chip the cylinder wall. Thanks for replying bro. I Will use a ingco mini grinder with flexible shaft attachment but suitable bit for this job isn't available in my location.

[@chiradip24]

@@krishnakumarc2950 black and decker rotary tool comes with all the necessary bits, i didn't need to buy anything separately

[@krishnakumarc2950]

@@chiradip24 👍👍....ok thanks

[@ltautomation8974]

Please review performance

[@irfaanirfaan7231]

Performance bro is it good

[@ranjithp8650]

Did u use this on bike. How is the perfomance

[@chiradip24]

No i didn't, in fact i have kept it as a backup. My present RXK setup is running really good

[@sauravSingh-ys1fx]

Nice

[@chiradip24]

Thank you for your feedback

[@teamsmokingpistons4432]

I think this cylinder is worst thing... Better to reuse the original as re sleeved👍🏻

[@ck-tu3qg]

Bro since you are from Guwahati i would like to know where you buy RX100/135 parts from. Last time i went to yamaha spares dealer they didn't have any parts for 2 stroke yamahas

[@chiradip24]

For original Yamaha parts, KK Verma at AT Road, for the ones not in supply RK auto chatribari and instagram

[@devendrabagul6613]

How is the performance of this block ?

[@chiradip24]

I have a 5speed RX and this block is not a direct fit on a 5 speed. I looking for a 4 speed head and magnet coil set.

[@devendrabagul6613]

@@chiradip24 OK, hope you get it. Not seen your informative videos since long 😃👍

[@chesty_meme]

Bro any updates ?

[@kadurahmanpuzhakara7032]

Bro what is the mileage and top speed

[@phussain2968]

Merapass e1 135orignal7.5new piston satthai my sale kartahu

[@sunnykhan3339]

Every machanic that i asked said that it is not worth it to go for a goeteze block,but i asked everyone the same question that show me the bike with a goetze,they just say that we worked on a bike a while back 😂,i am just curious that is it really worth it or should we invest more for a original yamaha block

[@chiradip24]

If you are getting an original yamaha block then go for it..

[@sunnykhan3339]

@@chiradip24 i do have it but i just wanna find out that why is it that everyone says that the yamaha one is better than the goetze block,and what if the goetze one turns out to be better by experimenting

[@sunnykhan3339]

@@sohamsinha3631 agreed brother👍

[@Incredifarm]

What is the price of the block

[@chiradip24]

I bought it for Rs3800 in 2021

[@amruth8558]

Where did you buy it from is it still in production

[@chiradip24]

I bought it from my local market. I am not 100% sure if these are still in production because covid has screwed up a lot in manufacturing field..

[@gyandeepchauhan7411]

5 speed ki block kit mil sakti hai

[@chiradip24]

Look for Motocraft raipur on instagram. I don't know them personally, so contact at your own risk.

[@syedsyed5155]

Bhai rx 100 ka balok salendar kit chahiye kitne ki milega

[@chiradip24]

I don't know.

[@ltautomation8974]

Original 15000

[@ltautomation8974]

Other 8500

[@Smrdvnanmaklu]

​@@chiradip24sir rxg pe rx king ka blok lagaya toh acha hoga?

[@chiradip24]

@@Smrdvnanmaklu Bhai, RX king ke block ke saath king ka head use karna bahut zaroori hai nahi to bike knocking karegi aur smooth nahi chalegi.

[@jagdishlakhaniya1838]

are bhai aap rong ho micron ka nahi aap k hath ka phark h aap ka hath hil raha h aap galat ho aap k hath hilne se veriyesan aa raha h naki silendar me kami h