Going down Memory lane! The struck half shaft continues to be a nightmare

[@disabledadventures4115]

Same happened to me years ago, and the nurse injected my eye twice to stop me blinking and moving it and she dug the metal out with a needle thingy, and what you may have is a bit of scar tissue from the metal melting itself into your pupil and it will still feel like you have the metal in for weeks maybe months, because mine was exactly the same.

[@marinastuable]

I had an MT5 with a 65cc big bore kit back in 1988

[@Professional-struggler]

Arr yes mate the big bore kit 😊🤠👌

[@chriswild2458]

Hey I had the M T 5 struggle I fell off it in the ice and one of RH Stevens tankers nearly ran me over then the driver shouted at me , bleeding and bollocked 😂 happy days

[@martinmillar8447]

Did it on a fizzy. Black feckin ice 😞 Used to do the big bore struggle too. 30mph mopeds that did 50 😂👍🏼👌

[@hairyspud7449]

When the mig welder first came well before the flash mask I regularly got welding flash. Even to the point I used other peoples names at the hospital 🤣🤣🤣

[@Professional-struggler]

😂😂 that’s bad when you have to do that mate

[@johnchambers6979]

Talk about memory lanes Chris, that's exactly how I got to and from my apprenticeship back in 96 a wee white mt5 15miles there and back in all weather's just like yourself only I was agricultural engineer, those were the days! I feel your struggle with the eye too. Hope it's all good now. Cheers fella, one of the best channels I watch. Keep on struggling!!!🤪👌

[@jerrypruden887]

Your video has only been up for an hour and look at all the comments. You are getting very popular!🇨🇦🎥😊

[@203MPH]

Don't wait with stuff in your eyes, just go to hospital immediately. I have had several trips to the ER at a hospital 20km from my home even though the nearest was within 2km. Just because that hospital had a eye department and eye doctor/surgeon on standby for the ER. They used some kind of hollow drill that cuts a little and socks the splinter away.

[@Professional-struggler]

That sounds like what I need mate, I’ll try the opticians tomorrow mate

[@martinwebster5881]

I feel your pain Chris I too have suffered the splinter in eye struggle.

[@MyMike1946]

You could try putting the good half shaft in the damaged end and see if it goes in ok.

[@EnidAgnusDei]

Sadly yes you are right about small family firms get sold on, but no one will ever take my company, be a cold day in hell before that happens. Happy Christmas to you and yours, all the best my friend.

[@Josh_MandJ_autos]

Chris, im a bloody optician and i did this cutting some steel sheet, nothing more embarrising than turning up at hospital and explaining this haha get it sorted soon pal 👍🏻struggle on brother

[@roxanne9651]

I am a carpenter and I was using my router and got some wood chips in my eye! It hurt like hell, I ended up going to my optometrist and having them removed! What a instead relief getting that out of my eye. Great job getting things do with the way your eye is😢. Awesome video keep them coming 👏👍🇨🇦💕

[@SuperWayneyb]

If you think that eye hurts try having a bump with no seatbelt on 😂😂😂😂😂😂🚗💨 great vid Chris but get that bloody seatbelt on 🤘😎🤘

[@Professional-struggler]

👌😂👍

[@DanDavies741]

Sounds mad, but the first time i had a splinter of steel in my eye, i used a magnet to pull it out because it was only on the surface.

[@Professional-struggler]

I’ve already tried mate it’s well in there 🙁

[@chox2001]

I’ve had steel in my eye before they had to use a needle to scrape it out. Unless it’s removed be careful if you go for an m.r.i. Scan because that can pull the metal and damage your eye. So make sure it’s out Chris.

[@markstewart7888]

you need one of those neodymium magnets chris, i spent a day in a and e with metal in my eye never again so i got a neodymium magnet, twice it has saved me going hospital :) @@Professional-struggler

[@roamingearth915]

Yes, good old days! Just getting over a tooth infection myself. Sucks sooooooo bad....put me down for the count for over a week. Hoping Chris and his family and friends the very best Christmas ! 🎄

[@eire90s79]

Doesn't work when it's hot steel burnt into your eye. Chris man wear the glasses

[@murex2murex826]

had many bits in my eyes over the years know your pain, also I was in the JOHN DEERE depot in January 1975 was a long drive home in the snow, keep going mate great veiwing

[@tony-yp6qk]

Another great video has always chris and leahdag and family 👍

[@davidmccausland9063]

Best wishes Chris..... hope u get sorted soon 😮😊

[@Rtfixthings]

I'm a john deere tech and travel from Kent up to that john deere HQ few times ayear, good to get a sense of where you are working, good job and entertaining to say the least 👍

[@martincunnington2154]

I remember a piece of rust off an exhaust dropping in my eye bloody, painful. That picture of you when you were younger is the spit of your archie. It's nice to go down memory lane and look back. Have a great week, chris. I hope your eye is better soon 👍

[@dennis38y]

Always wear goggles with a grinder Chris. The bits coming off the grinder are travelling really fast and can penetrate the lens of the eye. If it gets into the aqueous humour it can’t be removed. It rusts away and you lose your eye. Look after your mince pies, they’re not replaceable !

[@jimmyquinn9639]

Brilliant video Chris and hope your eye is better 🚚🚜🚛⭐️⭐️⭐️⭐️👍👍👍👍👏👏👏👏👏

[@Professional-struggler]

Cheers Jimmy mate 👍👍👍

[@125sm3]

Great job Chris, hope you got your eye sorted mate.

[@tinkeringtaylor3053]

Hope your eye gets better soon Chris, My memory lane I remember when i was young helping my uncle fitting a new wood floor on a hgv 40ft trailer for a local haulage contractor W Pringles, i was up on the chassis above the inspection pit cutting off the old bolts and i got hold of the headboard with grinder in hand to get down and i got electrocuted fell between the chassis into the pit after one of the lads cut the power off, later found out the grinder had been out on loan and the guy left it on his shed roof and it got rained on and knacked the insides i was ok just a bit shaky they reckon i let go of the grinder but it was just hanging from my hand with the electric ⚡⚡

[@jerrypruden887]

I had a metal splinter in my eye. Left it for a few days then went to the hospital. Getting the splinter was painful but nothing compared to them sanding the rust rings out of my eyeball, ever since then I’ve always tried to squint better when grinding😊🇨🇦

[@peterthomas120]

Hope you get sorted Criss just waiting for Louth tractor run

[@paulwilkinson4501]

Drilling rivets out of racecar chassis at 16, got a tiny piece of metal in my eye, feels like you have a javelin in your eye chris 🙈🤣 needless to say at Christmas....I got 10 pairs of safety glasses off everyone at work 🙈 Loving the channel mate 💪👍👍

[@dazjay5656]

Morning me old. Hope you and the family are well.🎉🎉

[@Professional-struggler]

Morning Daz, very well mate thanks 🎅🏼

[@jackzvid]

Had the same a few months back. Felt something in my eye for a few days. A&E couldn't remove it and referred me to eye specialist. Woke up in the morning and lost total vision in it and couldn't face daylight. Panic set in when the doctor got the needle out but the relief was amazing

[@BenjaminJohnson-mm3ge]

Chris had metal in my eye a few times. Tip to get it out. Open ur eye place tissue paper over eye then use a strong magnet on top of the tissue paper and it pulls it straight out works ever time for me hope this helps 👍🏻 keep up the good work

[@philippreitshammer]

Squint technique also worked for me under BMW's when I didn't trust the jack😂

[@johnhewit3099]

Another great vid Chris. Hope your eye gets better soon.

[@Professional-struggler]

Cheers John mate

[@MrJonah53]

A friend of mine was cutting some sheet tin, with a nibbler, and one of the halfmoon shaped pieces flew up and curled into his eye. He worked with for most of the day, and when he got back to the yard, he got a magnet from the workshop, and curled it back out. WTF.

[@philbean7521]

Yet another good show👍👍we never learn 😵keep up the brilliant struggles and keep safe 👍👍💪💪

[@Professional-struggler]

We certainly do not mate 😂👍👍

[@jerrypruden887]

Hope to see you again before Christmas but just in case, Merry Christmas to you and yours!🎉🇨🇦😊

[@Parastorm.]

I have done the same with getting metal in the eye when grinding of to A&E to have it out and then i did it again 6 weeks later, touch wood I have been ok for around 10 years. Stick with Allwoods for parts Euros are ok but much of it is cheap crap. hope the eye is better soon.

[@Professional-struggler]

Cheers mate… one day we might learn 😂👍

[@glenmartin2707]

Feeling your pain Chris I've had that before too with metal in my eye 😬

[@Professional-struggler]

It’s horrible mate

[@cannonEDHA]

Had the same thing probably 6-7 times now even with safety specs on , it’s daunting watching the needle come towards your eye but the relief after is incredible, have done the cotton bud trick aswell amd it’s worked just makes your eye sore for a few days

[@Professional-struggler]

It’s still in, still haven’t been back yet mate 🤦🏼‍♂️ going to try opticians

[@waynec6438]

Great trip down memory lane Chris 👍 I used to go to proctors when I was on a van for a truck and trailer rental company that had kit in there 15+ yrs ago. Get the eye sorted mate

[@jimb1783]

Good luck with your eye. I had a piece of metal go through my eye, 5 ops and 4 month off work. I'll be thinking of you 👍

[@Professional-struggler]

Oww dear mate 😱

[@Chris-jy3dm]

Bloody good show Chris I’ve had filings in my eyes from welding pigeon shit and grinding under cars 😢used teabags to ease the pain 🥵👍👍

[@Madmax-iy8fi]

I work with wood and I’ve always used the safety squint technique,always served me well.keep up the great vids Chris,love your attitude to life😊

[@Professional-struggler]

It served me well to mate

[@stevencoyne4971]

Bloody Good Show Chris 👍👍👍👏👏👏👏

[@peterdyer8789]

how do chris nice walk drive down memory lane woo woo i hope you get your eye sorted out chris too .back in the day when it was easy to get a job and get a trade behind you the good old days yippeee.

[@Professional-struggler]

Yeah very true mate, now everyone needs experience and yet kids aren’t allowed to work with us 🤦🏼‍♂️

[@ironmansmotorcycleandcarre5845]

I had RD50 at 16 and always had to keep replacing head every couple months lol 🤣 2 stroke fun My 16 year old just got 90s aprilia RS 50 and within first month has blew his piston lol 🤣 Great cheap fun 😂 he is now doing what I did 35 years ago 🤣🤣 oh the days when life was that bit easier 😂😂😂😂😂 Merry Christmas Chris and family have a great one

[@AliMackMechanical]

I hate metal in the eye had it a few times. Even once its out still feels like it is still there got some no more tears from chemists put it in twice a day. Cleared up in 3 day's its a struggle Chris 😉👍

[@Professional-struggler]

Cheers AliMack 👍 everything’s a struggle mate

[@lyndonwebber1389]

Chris 4 times this year I been in hospital getting stuff out of my eyes , it’s awful, 3 of them times I was wearing safety glasses, so now I won’t grind unless I got goggles on,I payed up for them bad boys ! They used the mini grinder on me twice to remove the skin on my 👁️ to get metal out ! Always enjoy vids merry Christmas butty.

[@Professional-struggler]

Yep that’s what I was wearing glasses at the time, gives you a false sense of protection 🤦🏼‍♂️ goggles now mate

[@MartinBall-v6y]

Great video Chris, Great trip down memory lane and nice to see were you learn to your trade. Chris look after that eye well mate and try not to rub it when it's itching or irritating you also you said you think its still in there but that could be like when you get grit in your eye and it scratches the surface of the eye that even when it's out you think it's still there it could be the damage from the needle they put in your eye that is making you think it's still in there but then again it could be still there and they missed it. Good to see you finally concur that half shaft struggle. Take care and look after yourself enjoy the rest of the weekend plenty of fosters to keep your mind off your eye. See you on the next one. Whooo whooo.

[@hilaryandbrianreid9876]

Keep us up to date re your eye.....worried about you !❤

[@Professional-struggler]

Cheers mate! Going to try the opticians tomorrow 👍 have a good Christmas 🎄

[@garysides636]

Hi Chris 👋 Sorry about the eye mate and please get it sorted / seen to quickly. Christmas is upon us nearly ....a year that has flown for myself. Both Jane and I watch you and have been cheered up by you countless times. So thank you mate !!! 👏👏👏👏👏 Looking at the diff and the bits in it .....sumps and gearboxes seem to have magnets in just wondering do diffs (to catch the loose metal bits etc..). Keep up the great work ....be SAFE pal above anything else. Merry Christmas ⛄⛄⛄ Gary and Jane 🎉

[@1RebelDog1]

I had exactly the same eye thing, and it felt like steel in my eye but the steel had come out and i had a scratched retina, after a couple of days the pain went, but it felt like i had something in there, doctor said it had gone, and i had the dye, just bear with it and it will get better, and put some safety glasses on lol

[@leedslad5497]

(Suggestion) Chris before welding clean both parts u want to weld to bare metal then weld it as u keep pulling rust & porosity in to your welds I think that’s y your weld doesn’t hold give a try bud bet your welds r better every thing els seems spot on

[@alfwhiteside4895]

Been there done that and got about 10 tee shirts

[@Professional-struggler]

😂😂 my T-shirts are stacking up to mate

[@matthewwiddows6319]

Hope your eye gets better soon, if you only could ever have one 13mm spanner you would guard it with you life, look after your eyes, you only get 2 and use them evey day. Get some decent clear glasses that your happy to wear. Happy christmas to you, your family and friends, looking gorward to mive 2024 vids.

[@Professional-struggler]

Yeah good advice there mate, you to Matthew have a good one mate 👍👍

[@andrewwigley2276]

You know Chris I was the exact same with the safety glasses until I had a 4 inch sliding disk explode on me and I was picking bit of the disk out of my face for next 2 hours lol I was so lucky I didn't lose a eye

[@Professional-struggler]

Oww nasty mate you where lucky there

[@andrewwigley2276]

@Professional-struggler never not at least worn safety glasses since and I'd rather wear full face mask now lol

[@davidhailstone1519]

Chris love the music

[@Professional-struggler]

Cheers David

[@BurnedOutGarage]

I use the old squints too, had a few close calls though. One near miss with a die grinder was a wake up call for me bit of over use it got caught rode over what I was grinding, bent then spat a piece of the burr off into my cheek just under my eye. Wiped off a pick and dug it out. Fair play on getting that half shaft out.

[@mudflipper8854]

I find it takes about 3 weeks to come out themself had many of sparks in eye I don’t use grinder without googles now I gave up the squinting technique

[@howardmarshall5713]

once had a piece of rust embeded in my eye Chris. I went to the hospital a&e the optical doctor drilled it out after freezing the eye ball.

[@howardmarshall5713]

@jerrypruden that was the same issue with me the tool he used for that on my eye looked just like a dremil drill 🥵

[@Professional-struggler]

Oww mate that sounds shocking 😱🤠

[@terryatkinson899]

Been there with the sore eye thing 😭 Great to look back at what you got up to years ago. We did shit you wouldn't get away with now... burning rubbish, launching pallets off a forklift at max height 🙄 and using tools without instruction. When someone asked can you use such and such, pride wouldn't let us say no. Today's lot would simply stand there with their hands down their jocks and stare blankly if asked to give anything new a go....

[@wayne3790]

Absolutely brilliant video as always mate, thank you!! So sorry to hear about your eye mate, really hope it’s feeling lots better really soon 👁️🙏 Had to go to the eye hospital when I was an apprentice HGV Mechanic 20+ years ago. Working under a truck & got something in my eye that really didn’t want to leave, but thankfully thankfully it came out alright eventually. Felt like a rock under my eyelid, bloody painful. Really feel for you mate. I’m a truck driver now. All the best to you & all the family mate 🙏 Merry Christmas to you all 🎊🎉🌲🎅🏻🤶🏻☃️🥳 I finish on the 22nd, can’t wait. All the best buddy 🍻

[@bushypaul]

Memory lane for me too I used too replace rub plates covered in grease awful job , if you get a spark in your eye you need to get it removed asap or your eyeball skin grows over it

[@KevanBaugh]

Hi Chris another interesting video you shouldn’t weld or cut steel with a grinder with out safety glasses 🥽 it’s to late when your blinded & you can’t work & support your family don’t take risks it’s not worth it use the safety equipment you have that’s what you have them for so take time out to put the the safety equipment on before it’s to late 😢

[@alanwilliams5907]

Chris, I've been chipping slag off weld for years with no protection and as soon as my brother said one day"You should wear googles doing that" I ended up In a+e 10mins after 😂

[@RuthNewstead]

Loved the old ex rac smiley bloody good van as long as you good with pigeon 😂😂😂 🛠️🛠️⚓ JB

[@Professional-struggler]

😂😂 that’s where the pigeon apprentice starts mate 😂👍

[@johnwelburn9966]

The steel splinter in the eye is no fun had it myself when the squint method failed

[@Professional-struggler]

Umm we’ll never learn mate

[@denvernicholas5188]

We've all been there chris 😂 and yet we still do it again we never learn bugger it..😂

[@Professional-struggler]

😂😂🤦🏼‍♂️ true mate

[@MarkHenson-mt9nq]

Merry christmas chris have a good one

[@Professional-struggler]

Thanks Mark you to mate 👍👍 woop woop

[@user-rw2um8ro2p]

Great video Chris

[@Professional-struggler]

Cheers mate

[@philglover2973]

Awesome video thanks Chris have a great Christmas and new year bud 🚜🚜🚜🚜🚛🚛🚛🇬🇧🇺🇲🇬🇧🇺🇲

[@Professional-struggler]

Thanks phil mate 👍👍 same to you have a good Christmas 🎅🏼

[@johnroberts6152]

Chris we have to wear protective clothing plus glasses and ear defenders and most of the time gloves back in my workshop l use nowt and my wife reminds me every time she comes out lol

[@fullpowerlad]

That Norm voice kills me 😂😂😂

[@Professional-struggler]

😂😂 the voice of reason 👎😂

[@ukdjteezer]

hey Chris, The squinting Technic Verses the Keep the Van Clean Technic. pmsl 😘

[@toocooljonny]

Hiyeah Chris, About your poor eye, I think what you're seeing is scar tissue in your eye, you'll need a antibiotic eye drops or cream that goes into your bottom eyelid at night (bed time) I had a tear in my cornea few years back, takes a few weeks for the scar tissue to vanish, and don't worry it will vanish. ☺️

[@froghole1572]

Born in '81 🤣 I was born in '59, compared to now, things were good then, I'd go back in a flash😎

[@SimonHarvey-i4z]

Yo chris i literally lived up the eye hospital when i was younger used to loads of welding to land rovers and practically every time i couldn't be arsed to grab me goggles i would get summit in my eye!!!had so many bollockings from the hospital!!!!!but the pain was savage like u said its all u can think about get well soon dude love your content ALWAYS makes i laugh!!!!!!take care in your struggles PS R U DOING A COLAB WITH WELDER FABBER 4 XMAS????

[@davidsanders2806]

Chris go to the eye hospital at qmc you can just walk no appointment.

[@Professional-struggler]

Cheers mate 👌👍👍

[@Hamstermist]

I’m a Hgv tech for the swain group at their home base at Strood. They’ve shut a few workshops down. Proctors was the most recent one to go. Started with overtime cuts I believe.

[@Professional-struggler]

Sad to see all the little firms going mate 👍

[@MathewBoyes]

Hi how are you doing

[@peterthomas120]

Hi criss hope get your eye sorted out I've have a strong magnet pull your socket out

[@Professional-struggler]

Tried a magnet mate 👎

[@dannycrooks8462]

Mt 5 brings back memories none were standard all modified to 80cc+ 1 had a 125 engine in it then on of the lads had a smash a the police examined all the bikes and put them off the road 😂😂

[@Professional-struggler]

😂👍Aaaar the good old days mate

[@davidwilken9601]

Same happened to me years ago ,Horrible experience seeing the needle coming towards your eye.

[@Professional-struggler]

Yeah not nice mate… the drill is even worse 😱

[@leefair9598]

Yerrrr boi only just watched last vid Chris xxx merrry Xmas to your family xxxx

[@Professional-struggler]

Cheers Lee mate you to have a good one

[@nickaf5262]

Langar is the main UK John Deere factory Manheim Germany is why we re there built and the big 7r and 8r are built-in usa

[@Professional-struggler]

Didn’t know that mate 👍👌

[@slickmouse]

I had metal in my eye, went to the hospital. They sat me on a reclining seat, I hate anyone touching my eyes or neck, anyway the doctor came in with a bunch of students and asked if that was OK of course I said. He then peeled my eyelid back and my hands nearly broke the armrests! Ah yes I can see it says he and then invited all the students over one by one to look 😢 he then got a bud and got it out ...then put my eyelid back in place, the relief!

[@P4ULC71]

i thought you put some safety specs on the other day?

[@jerrypruden887]

I saw him with a pair on. I think it was right after he thought something went in his eye! Lol

[@Professional-struggler]

I did mate think that’s when I got it after wearing them… false sense of protection 🤦🏼‍♂️

[@TheAgwarn]

I work for CDA which is the building in front of Proctors 👍🏼

[@Professional-struggler]

You could of made me a brew mate 😂😂 is it paper packaging CDA mate?

[@TheAgwarn]

Domestic Appliances now, it was probably SCA packaging in your day 👍🏼

[@lemmy9996]

Xmas pressie from Baz @ WelderFabber, some basic welding lessons! It will make your life so much better👍👍👍

[@Professional-struggler]

😂😂 next week mate 👌👌

[@chrispiper6269]

That look Lil Dag gives you when you tell a big porky pie on camera 🤣🤣🤣 Hope you get your eye sorted mate - that must suck bigly!

[@Professional-struggler]

😂😂 he knows the score, cheers Kevin mate

[@lukeframpton3671]

Mate I've had some shit in my eyes the worst had to be paint stripper fucx me I won't forget that one I wear the safety specs now with the foam on the inner side bolle tracker 2 try them mate nothing can get underneath

[@MrZimmaframe]

I know wxaclty how it feels Chris, i once got a slinter in my eye after cutting wood with a chainsaw and it drove me mad, went hospital about 2-3 different times until they actually got it out, and after had to wear an eye patch for a day or two cus it will get the eye heal better and prevent the scar tissue of the outer eye lay or something lol. Needless to say i always try to wear eye protection now, but i can't go through all that bs and pain of getting it out and letting it heal lol 😄. Hope you feel better and the family is excited and ready for Christmas. 🎄🎅🏻🤶🏻🥂🎁🎇🎉 🥳🎈.

[@mikebashford8198]

I get metal in my eye regularly - every month I have a Lucentis injection - into my eye - to try to cure a macular oedema - a fluid pocket in the back of the eye - caused by a Retinal Vein Occlusion. Shit happens. The fluid causes blurred and distorted vision - it's like looking through several layers of net curtains - and straight lines look wavy. Although the thought of having a needle poked into your eye is horrific, don't be worried if you ever need it done - they put anaesthetic drops into your eye, and there is no pain or discomfort whatsoever. After the needle has penetrated your eye, when they press the plunger to pump the medication in, you see loads of grey bubbles rising - like having your own personal Lava Lamp inside your eye.

[@benashcroft7758]

Very random, but at 3.53 that's me driving my Beetle!

[@mred2661]

Another classic feel for you with the eye best thing for that is when you get in van with liil dog get a nice comfy blanket and rest there till end of shift hope you have good Xmas and be careful what you are chewing on because you no what's coming next woop woop

[@steaminglion4067]

I was looking in the comments for the you tube police 😂 can't find any Criss i think you got away with it 😂😂

[@Professional-struggler]

😂😂 I think I’ve out skated them mate with my private road 😉😂😂

[@kevinkendle9533]

Hi Chris I wash my eyes out with milk 😢hope you sort it out..Keep on Struggling 😊

[@Professional-struggler]

Cheers Kevin mate! You to mate keep struggling

[@donkeykong7777]

I know what you're going through, I had a grain of sand embed itself into the front of my eye, had to go to hospital and the Dr had to use a syringe needle to dig it out, the Doc kept telling me to stop moving my eye, I said let me stick a needle in your eye and see how still you can keep it, daft twat. Regarding it still being in your eye, I felt the same but it was the damage they do getting it out with the needle that makes it feel as though its still in there, it repairs itself pretty quickly but is annoying until it does, just thought that might be the case as I doubt they would have left anything behind WooHoo 👁 👍

[@Professional-struggler]

Did the same with me mate…. Keep your eye open 🪡😂😂 yeah that a natural thing to do while you’ve got a big needle near it 😂

[@gavinoconnor2991]

Keep on struggling 👊👍💪🤙🎄 👀

[@Professional-struggler]

I shall try Gavin mate 👌🤠

[@Rtfixthings]

Chris, what do you use to edit your videos? Looking to start a channel but don't no where to start lol, any advice would be great

[@Professional-struggler]

All done on my iPhone Ryan, record, edit on an app called iMovie and post of my phone to mate… no special tools needed🤠

[@harryharker9564]

ooooh I laughed 😀🤣😂great outlook .

[@sidsxr3irestoration]

Got to wear goggles Chris you only get one set of eyes. I done my eye in with a bit of s cam of all things just starting into a slack adjustor. They got metal out from back my eye and repaired my eye. Just got a blind spot now.

[@Bothy666]

Safety squint doesn’t always work ! 😮😂😂😂

[@Professional-struggler]

Dame it 😂🤦🏼‍♂️