Golden Oldie: Massey Ferguson 1200 [Pure Sound] Ploegen | Ploughing | Pflügen

Ploegen met een prachtige Massey Ferguson 1200 met een 4 schaar Niemyer 2-180 ploeg van David Bakker uit Kloosterzande.
Ploughing using a Massey Ferguson 1200 with a 4 furrow Niemyer 2-180 plough, from David Bakker of Kloosterzande (NL)
Pflügen mit einem Massey Ferguson 1200 mit 4 Furche Niemyer 2-180 Pflug.
/ tractorspotteryt

[@selmirikanovic]

Amazing that this tractor has the same engine as my Landini 10000 - A6.354 with only 105HP. Modern tractors need 150HP for 4 furrows yet this old dude makes easy job with nice and deep plowing.

[@johnleeson272]

I would like to say that I was the first person to drive a Massey Ferguson 1200 which was the very first tractor to be shown at the Lincolnshire Show. I worked for J A Gagg & Sons at the time who bought the tractor. John.

[@robertlonsdale3826]

Nice to see an operator than can set his machine up- perfectly- no depth wheel, maximum weight transfer from plough to tractor just as Harry Ferguson intended, perfect trash burial , perfect bout matching, level finish, a pleasure to watch..

[@skyleraxl6704]

You probably dont give a shit but does anybody know of a way to get back into an Instagram account? I was dumb forgot my account password. I appreciate any help you can give me

[@memphismarco5147]

@Skyler Axl instablaster =)

[@skyleraxl6704]

@Memphis Marco i really appreciate your reply. I found the site through google and Im in the hacking process now. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.

[@skyleraxl6704]

@Memphis Marco it did the trick and I now got access to my account again. I'm so happy! Thank you so much you saved my account!

[@memphismarco5147]

@Skyler Axl you are welcome :)

[@peejaygeee]

Superb tractor and much under rated plus a really first class piece of ploughing an absolute pleasure to watch, full marks to driver

[@malcolmgreenhill4955]

Brought back great memories for me. The 1200 was so balanced with a plough. I used the mf diamond reversable , it came new with the tractor in about 75

[@w3ppy1]

No land Wheel! That`s how to set a plough up... good work, nice old tractor, well built...

[@maureenphillip7128]

Fantastic outfit plough well set could watch this all day.

[@swiftyjim2]

These are fantastic videos you produce. Its nice to see some of the older machines still working hard too. The ploughing looks expertly done, if it was me, I'd be all over the place!.

[@Tractorspotter]

james healy Thank you! There plenty more videos coming up of old combines, tractors etc.

[@thevox1075]

Huge field. 4 bottom plow. How many days did that take? How about a turbo, little bit wider tires, and a 7 shank coulter-chisel? Get more work done.

[@paulgriffiths8359]

fantastic video tractor and a top job of ploughing one the best videos I have seen in a long time on youtube

[@nagd2010]

Mooie video! Mooie trekker ook en een heerlijk geluid.

[@petrokemikal]

Beautiful old tractor.. Was quite surprised to learn that there not that beefy with regards to Hp though.. Looks like that frame could handle 200hp all day !!

[@davidbakker645]

Hi this tractor is mine It is nice to drive it

[@mercury8117]

Awesome sound from that engine. Man and machine in perfect working harmony.

[@martinejoseph1644]

C'est beau et admirable a la fois !!!!! Très belle vidéo merci ! Cordialement FRANCE ;

[@dendrus1949]

A man who knows how to set plough

[@davidbakker645]

thank you for that .

[@davehodges6258]

Outstanding set up there" A true credit to you,.

[@275GTA]

Pure traktor kracht , zonder al die elektronische prullen en het bewijs dat je geen 200pk nodig hebt om mooi ploegwerk te maken

[@herbhouston5378]

Now that's a sweet ride! Beautiful tractor and plow. Plow set perfect! Good job of plowing and the field looks great. How many acres in this field and how many acres total? What do you raise? I really enjoyed this and I really liked that the only music was that sweet running motor. Thanks for posting.

[@garethmcnally5349]

love the sound of 6 perkins

[@markstengel7680]

Beautiful MF 1200 Looks brand new. Good resto job. Happy Farming 🌽🚜🇺🇸

[@Mackeson3]

An interesting concept. An MF 1100 engine sat above two MF 188 back ends! A good tractor if treated well ( Unlike my neighbours who ran theirs flat out all the time , thrashed into the ground and destroying at least 2 engines in the proccess ) But not without mechanical problems. By the time the replacement 1250 came out they had ironed out most of the problems but by then it seemed to have gone out of fashion and only about 300 1250s were built. A lovely job of ploughing by the way!

[@scooby7346]

They were not 188 back ends. The castings may have been but the innards were 1200. I once had to buy a crownwheel and pinion for a 1200 and they were specific to a 1200. And they were handed. The fronts were different to the back.

[@claesmansson9070]

Think was 1080 axles,some dry brakes some hydr.

[@Mackeson3]

@@claesmansson9070 Yes if you look at Cowfarmerdan's video about his 1200 he states they were 1080 axles, not 188, I was mistaken!☺️

[@jamesbarbour8400]

The rear axle castings, front and rear were MF 188 items on all MF 1200s, dry brakes all round initially, then wet brakes from about 1977 onward. MF 1250s had MF 595 rear axles all round - roughly an inch longer and also roughly an inch larger diameter outboard reduction gear unit. These axle units also had increased wall thickness in the castings making them heavy duty spec. Whole back end of MF 1250 was beefed up to cope with increased lift capacity and assistor ram linkage was now attached to centre housing casting, completely removing the loading on the top cover as on the MF 1200s. European MF 1080s had square section rear trumpets initially dry brakes then later wet brakes. US equivilent MF 1080s originally had round rear trumpets then changed to square but still with dry brakes then latterly had wet brakes. All square trumpet MF 1080s, US & European had the longer & increased diameter outboard reduction units with increased wall thickness in the trumpets. Only 322 MF 1250s ever made - a much improved tractor but very expensive to produce owing to the bespoke nature and low production numbers at Barton Dock factory, Manchester. An MF 2640 with the later •4 version of the MF 1200 engine initially produced 104 hp (later 110), and was cheaper to buy, built in France and of conventional design. MF 1250s also used the •4 version of the engine and due to increased material in the side skirt and extending the casting down past the crank shaft centre line plus removal of tappet access side covers on RHS of engine gave extra material strength and hence increased rigidity of the engine as a whole which allowed it to be used without a side supporting frame on the MF 2000/2005 series tractors from France. A substantially built engine sump added considerably to overall rigidity of the transaxle as a whole but some MF 2000s did break their backs due to overloading when using large reversible ploughs so casting flanges were increased in thickness as was casting wall thickness, also stronger attachment hardware in form of cap screws versus bolts (I stand to be corrected on that particular point). Reason for the crownwheels being on opposite sides on rear & front axles was so that all four wheels rotated in same direction, same as Muir Hills for example and others. Were this not the case, the two axles would be rotating in opposite directions with 'interesting' results !

[@12501980]

Mooie film ! Wat we allemaal niet kunnen met de drone !

[@RB74ify]

Amazing tractor and video too!

[@marcvandenbruwaene1643]

Mooie video , heb hem al meermaals bekeken 😀

[@richardfoster916]

making good job and sounds nice 6 cylinder

[@petergardner2334]

that 1200 is a nice tractor

[@MasseyFergusonCompany]

Amazing!

[@MrRoboo1]

mechanical poetry.brill.

[@beezumph675]

great video top job

[@hendrikkerkhofs]

mooie trekker!

[@TheGreatBritishFarm]

Lovely tractor

[@kinze2010]

Just show a tractor that is 40 years old can still do to same if not even better than a brand new tractor fitted with gps and other electronics

[@ianhotson6057]

We never had 1200 Series in Canada however we had 1500 and 1800 then they rebadged them to 1505 and 1805 they never had Perkins in them we had 32 08 cat V8s, we ran the 354 turbocharged Perkins in our combines, they were a great engine

[@beetee2905]

moin, dit is een prachtige video !!!

[@MikevandenHardenberg]

Mooie video!

[@ACF6180T]

M-F means, Mighty Fine 1200 thanks for the video.

[@McferranGlenn]

BIG WORK

[@maureenphillip7128]

O yes listen to that sound.

[@gregoryvandaele9947]

Shoen video. Geen vidéo von vlas machinen? Union/Dehondt/Deportere

[@RedFeetRober]

It´s like new.

[@lorieneater]

nice man how do you get to ask all the farmers to film them?

[@lesliephillip-v9d]

What a beast.

[@theforester3474]

The ploughing looks perfection the tractor looks and sounds great the soil looks heavy this cant be the uk is it Holland.?

[@donaldellis3609]

No heavy soil in uk get real try Essex area

[@davidbakker645]

this in holland , this tractor came used from the UK .

[@lesliephillip-v9d]

Is that the roar of a Perkins engine i hear.

[@1246fan]

mooie film op het zeeuws vlaamse

[@guziol542]

Super :)

[@eicherundeigenbau7283]

Der Perkins AT6. 354 Motor ist Power Pur !!!

[@Mackeson3]

Looking at that reg. plate AFE 404S l wonder if it was originally supplied new by Burrells of Haxey ( Lincolnshire)?

[@davidbakker645]

Hi Mackeson3 how does it works with reg plate,s in the UK does every has his one number combination ?

[@Mackeson3]

@@davidbakker645 They are all unique of course but looking at the letter it suggests Lincolnshire and the last letter on the plate means first year of registration.

Beautiful MF! Nice work

[@jamilaari3514]

we had one like that but with a V8 engine Massey Ferguson 1505, but we had to sell it :(

[@nigeldavison3004]

Farm near me had a1200 in mid 70s thay pulled a 6 furrow rev dowdeswell pull like a train

[@bososz]

That seems like alot of field for such a small plow.

[@mitchelm6753]

Here in the Netherlands the ground pulls so havy that you need to have at least 150 hp to pull a five furrow plow. In this case with 105 hp a four furrow plow is more than enough!

[@Mackeson3]

Mitchel Moerland It looks like at least a 16" ( 40cm ) plough too.

[@AgropolSokoowoTV]

Mitchel Moerland 150hp? In poland we plow with 180hp for 5 furrow and 280/360 for 7 furrow

[@mitchelm6753]

same thing here! i said at least, most of the time its 200 for a 5 furrow ;)

[@claesmansson9070]

Big difference if 2 wheel drive or 4,1200 is constantly 4 wheel drive + lock if wanted.Used 5 bottom Øverum myself,think adjusted to 16 inch,on hilltops with only clay,tractor could have tendency to start jumping.Now not plowing anymore,just use Kongskilde selfmade 10 metres stubharrow with 310 mm tips on the 40 chisels,so full cut and 9240 in front.

[@peterjamesparker8269]

trator equipado sistema hidráulico de 3 pontos , com controle de profundidade e ondulação ? equipado com p t o 540 rpm ?

[@davidbakker645]

1000 rpm pto

[@petekeightley2973]

Tractor porn. Spent a few hours in one of these little beauties many years ago.

nice :)))

[@navnathkadam2673]

Daniel Čiha Agअःकro videos नीयत

[@KasperA89]

Nice MF 😊

[@Henrik7480]

Nice work the old MF does :)

[@harmlip4887]

spul!

[@charlietanner6211]

why licencse plates on foreighn tractors

[@MultiArrie]

decoration, dutch tractors do not need licence plates. To avoid problems in germany and belgium they can get dutch plates for tractor with letter combination GV.

[@maureenphillip7128]

Listen to that engine.

[@TheWoodbutcher66]

UK number plate? Location?

[@Tractorspotter]

James Campbell It's in the south-west part of Holland. Tractor was sold new in the UK and later exported to Holland ;-)

[@JacquierDavid]

super vidéo et vive les MF :) mais y peut tirer une 5 voir une 6 socs tranquille je pense :)

[@HI-cl3jj]

HI

[@davidbakker645]

HI

[@necatibezirci6551]

Retired 😂😂

[@DavidBrown-fq3ri]

Sounds turboed. Man don't lift the thing up the full way, can hear the blow off valve going off, even at end of video. Tractor leaving field at end even squeezing the valve. I have a 1200 but I do know how to drive it. Toothache material😬

[@mercury8117]

Awesome sound from that engine. Man and machine in perfect working harmony.