Cabinet Install Day!! | Basement Bar Build Part 5

Laser Level: amzn.to/3B6zzRH
Composite Shims: amzn.to/3usaooI
Trim Head Screws: amzn.to/3VQOoj6
Cabinet Screws: amzn.to/3B7fk6g
Oscillating Tool: amzn.to/3VufXiF
Miter Saw: amzn.to/3UtY3Lw
Impact Driver / Drill: amzn.to/3B75L7B
Pin Nailer: amzn.to/3gVbbeQ
Router: amzn.to/3H9m47B
Cabinet Bumpers: amzn.to/3ujUhK6
Countertop Bracket: amzn.to/3XRTEVA
Construction Adhesive: amzn.to/3BbwvDN
Clamps: amzn.to/3EURXOu
Shelf Pins: amzn.to/3TwlbbP
My Tools: www.amazon.com...
___________________________________________________________________
This week I install all the cabinets for the basement bar. Whether you are installing kitchen cabinets or cabinets for some other purpose, the process is still the same. I walkthrough the step by step process of how to make sure your cabinets are sturdy and level. There is also a few tips and tricks along the way. Hope you enjoy!
Thank you for watching and hopefully you found the video helpful!
___________________________________________________________________
TikTok: / goldenkeydesign
Instagram: / golden_key_design

[@markkarolich7548]

Nicely done! Looking forward to seeing the finished bar.

[@GoldenKeyDesign]

Thank you! Excited for you to see the finished result!

[@bdonato14]

Can’t wait to see what the counter top will be 👀👀👀

[@GoldenKeyDesign]

Excited to show you 😁

[@nolj67]

I think the same countertop you did for the kitchen island would be nice.

[@GoldenKeyDesign]

Good idea! And now I have a track saw to make my life a lot easier haha!

[@Top_Striker9]

Love this bar.

[@GoldenKeyDesign]

Thank you!

[@debbydhill]

Really nice install, looks great!

[@GoldenKeyDesign]

Thank you ☺️ I’m glad you enjoyed it!

[@richardpaz1919]

You should of put a outlet facing the other way where the chairs going to be so people can charge their phones. But behind the bar works fine as well nice work man!!

[@GoldenKeyDesign]

That's a good idea! I figured they can reach over the bar top to plug them in if needed but it would be easier on the front side

[@aleciaa971]

Hello I love this tutorial! Did you give the details on the refrigerator?

[@bigskycowboy1]

Why arent you doing your signature clap man? Ya know, say it and then clap

[@GoldenKeyDesign]

Believe me I want to haha! After the floating bed video, I got a lot of flack from viewers saying it was annoying, especially for those using headphones. I kinda phased it out but will give a nod to it here and there for my OG viewers like you haha! Maybe I’ll bring it back in the future 🤔

[@bmiller5713]

Just FYI, one needs to install an arc shield with that receptacle when you're extending a device beyond the wall, especially coming out into combustible material.

[@matthewmarsh9193]

looks amazing do you have the plans available?

[@bobk3840]

Not sure of your location but we had pvc glue in the 80’s. 😂

[@GoldenKeyDesign]

😂 I was very confused too

[@behnam62]

the fridge does not look like an under-counter (don't see any vents under it), did you face any issues with heat dissipation?

[@cp3onmtv963]

Nice white quartz would look great… ps: are you guys keeping the wood tongue and groove down there??

[@GoldenKeyDesign]

I think we have similar taste haha! And we are going to keep the tongue and groove walls. It is a lake house so it fits the vibe of the place and it would take a lot of time and money to replace it all

[@tonybabic4081]

So tidy!

[@GoldenKeyDesign]

I try my best to keep a clean job site 😁 thanks!

[@jgrigusIV]

How do you secure the top counter top to the metal overhangs?

[@GoldenKeyDesign]

We used a heavy duty adhesive

[@DerekTJ]

Okay cool, so this video answered questions I had from other videos. I'd love to know how the high counter is held in.

[@GoldenKeyDesign]

The lower countertop is 36” high which is standard counter height and the higher countertop is 42” which standard bar height. Hope that helps!

[@DerekTJ]

@Golden Key Design great! Is the upper counter screwed to the black metal brackets?

[@GoldenKeyDesign]

@@DerekTJ No, it's not a good idea to screw into quartzite so its just glued using silicone and the weight of the countertop itself is heavy enough to keep it in place

[@DerekTJ]

@@GoldenKeyDesign Gotcha.

[@bobk3840]

You just need a gfci outlet at the beginning of the circuit. You don’t need two on the bar.

[@Top_Striker9]

Wow

[@GoldenKeyDesign]

Thanks Ninja!

[@JonDon101]

How far apart are your cabinets from one another? Trying to figure out a good distance

[@TheCoppiFam]

What material dis you use for the battens?

[@GoldenKeyDesign]

I ripped some 1x6s to 1.5" wide strips

[@cji8]

Where are these cabinets from?

[@GoldenKeyDesign]

I built them myself from plywood - check out the earlier episodes in this bar build series

[@bruceh9843]

Ｐｒⓞм𝕠𝕤𝐌