Good Parts Anti-Sway bars installation on TR6

Detailed process of installing the upgraded front and rear upgraded anti-sway bar kits on this beautiful TR6, following the original detailed instructions.
Good Parts Website - www.goodparts....
Rusty Beauties Website:
www.rustybeauties.com
Rusty Beauties merchandise:
my-store-df5ca...
Join the Rusty Beauties Facebook group:
/ 3028660134022715
Rusty Beauties Instagram: / rustybeauties
If you like this channel please consider supporting it! It takes lots of time and effort to film and edit these videos and your support will help me spare more time for that!
If you wish to support me on Patreon you can do it here:
/ rustybeauties
If you wish to make a one time donation you can use this link to make PayPal donation at any amount:
www.paypal.com...
The financial support to the channel doesn't buy you anything special. There is no such thing as early access or VIP content here as I don't want to take away from those who can't afford it. The financial support is your way of saying "Thank you Elin for taking the time to edit these videos!", but only if you feel like it and you can afford it. Just being here, watching, liking, sharing is also a big support and I appreciate it.
THANK YOU!
#rustybeauties #TR6 #swaybar

[@pda49184]

Great instructional video Elin.. There are not many videos on installing replacement upgraded roll bars . Having watched how you did it and the difficulties, it might just put a few folks off trying it 😅. I was almost working up a sweat on your behalf .. Eye catching car that has the look of being driven regularly.

[@stevezodiac575]

Excellent video and great work Elin! First time I've seen one of your videos. I will look at more! I'm curious as to why the designer made the links to the rear trailing arms so long thus making the sway bar ends so low? That the bar ends are then pointing forward and hanging low poses a snagging hazard I think. Some how it doesn't look good to me.

[@philtucker1224]

Elin, if the exhaust guys want to take down the sway bar to give room to make a new exhaust, you better warn them NOT to unbolt the sway bar blocks!!

[@johnmalone407]

Nice job ! I want some sway bars as well Elin!

[@keeseveleensmaarse8259]

Second! (After Tush, of course.... so, counting as good as a first, I think 🙂)

[@ralphcap2476]

Don't know why your not putting in the exhaust would seem more efficient if you did it.

[@pubu2010]

I hope you realize how valuable your problem solving skills are. You solve so many problems in gifted ways to make all our lives easier, our knuckles less skinned, and our cars run better/smoother. Many thanks.

[@BruceBoschek]

Those bars look good and your installation and discussion are meticulous as always. There should be some relatively simple way to solve the exhaust problem. Let us know about that when the problem is solved. 🙂 Thanks for another great video.

[@cheftush]

First…😉 Yeah, I thought you might have some clearance issues with the exhaust. Nice looking bars though…well designed. I think they will go on my 70 PI.

[@philtucker1224]

You’re far too clever for your own good Dave..

[@TR4Ajim]

Elin, do you know why the TR4s had front sway bars, the TR6s had front sway bars, but the TR4A didn’t have them? Did it have something to do with them being first generation IRS cars?

[@mikewindsor5957]

I put Good parts sway bars on my TR6 and I have a Stebro exhaust . I had the same clearance problem with the rear sway bar , I wound up making aluminum spacers to go between the sway bar pivots and the frame , ---It's been a while since I did it and I cant remember what I did to bolt it . ---Not sure if I used the orriginal U bolts or had to get ones with longer legs .

[@mikehoroho8453]

You could, if you absolutely need to, just add a 1" spacer block to the mounting bracket on the rear sway bar. Of course, you'd need longer bolts as well.

[@tomswindler64]

Elin nice job,looks good,customer should be very happy.great little video as always just keep doing what you doing 😎😎😎👍👍👍

[@paulfanning7059]

Third. No way to beat Tush.

[@T3glider]

Those are heim (in the US) or rose (in the UK) joints, not ball joints.

[@BruceBoschek]

Absolutely correct. However, if you call them by their correct names no one will know what you are talking about. The vagaries of established falseness.