GoPed Rebuild, Will They Run? Minimoto

  Рет қаралды 15,193

JdbMOTO

JdbMOTO

Күн бұрын

Пікірлер: 34
@rabbitfootedkitty1339
@rabbitfootedkitty1339 2 жыл бұрын
Seeing this gives me some more faith, much appreciation. Let Gopeds live on
@jdbmoto
@jdbmoto 2 жыл бұрын
The smell of the two stroke was a flashback! Thanks for watching
@Nickelyoonthehop
@Nickelyoonthehop 2 жыл бұрын
Must’ve felt great dragging em out again. Brings me back. I can almost smell the 2 stroke through the screen.
@jdbmoto
@jdbmoto 2 жыл бұрын
Thanks for watching! It certainly brought a smile to our faces to see the out ripping again.
@thereald-goz3588
@thereald-goz3588 3 ай бұрын
Start starting because you have to switch the choke from on to off on the box. Plus its good to check the idle & fuel mixture Screw.
@treejay818
@treejay818 2 жыл бұрын
Hey keep uploading goped vids , this was so much fun
@jdbmoto
@jdbmoto 2 жыл бұрын
We got more coming that’s for sure! Waiting for my brother to return from his deployment to continue with the Goped content. Thanks for watching!
@arrepuess
@arrepuess Жыл бұрын
Ive bought, fixed and sold maybe close to 100 back before the electric ones came out. Mostly as a hobby, because there was no real money in it. That one with the squared cylinder is a geo engine. A hybrid reed & non reed mix. They are difficult to get running right. Although i found a way to tune them. The needle that runs down the barrel of the carb can be turned with thin needle nose pliers a bit at a time. Try one way, and see of it gets better or worse. Too bad there weren’t many with the tiny adjustment screw at the top of the barrel like many other barrel carbs have. Also the gaskets and side reed hoses crack and get air leaks. Otherwise they be the most efficient engine. Was the most efficient engine back when they were invented. But very finicky. Once they are right they run ok, just never perfect. I still have one that runs pretty well, but it is the chain drive newer model. Have fun!
@mrsideways4574
@mrsideways4574 2 жыл бұрын
And for yours try upgrading to a wt-668 carb with a velocity stack and a air filter, and a rokit key that will get you more performance and it will run a ton better
@nativelungz4489
@nativelungz4489 2 жыл бұрын
for the slower one get a slightly bigger spindle. also i would get a gasket set change, crankcase, head, manifold , carb. try to clean up the deposits in the cylinder and top of the piston, if its a thick amount get vinegar and a toothbrush and you can literally brush it off.. i woundlnt advise scraping it off.. also a 3rd bearing kit if you want the best results i kid you not it will run for many years more,, G23lh is the small one and Gzns25 is the slighty bigger one. is the slighty bigger one. i had a Gzns25 sitting on the balcony for a long time then i think my roomate threw it away lol... i replace the motor with a G240rc then a G290rc, as of now im running a G320rc.. aswell going for the G340rc
@jdbmoto
@jdbmoto 2 жыл бұрын
Thanks for the feedback.
@JoshV-t2l
@JoshV-t2l Күн бұрын
Where can I get the deck with the foot on it look fire like that
@hinano316
@hinano316 Жыл бұрын
Great video guys😊
@jdbmoto
@jdbmoto Жыл бұрын
Thank you! it was like old times for my brother and i.
@spoolinturby1640
@spoolinturby1640 5 ай бұрын
first deck with the giant foot ive seen online other than mine. Know anything more about it?
@vdubfredvr6969
@vdubfredvr6969 27 күн бұрын
What was the part# on that Husqvarna carb?
@yongjohneg9940
@yongjohneg9940 2 жыл бұрын
Try disconnect the kill switch wire. Try to start. I bet u it will start up.
@jdbmoto
@jdbmoto 2 жыл бұрын
will try that next time
@mrsideways4574
@mrsideways4574 2 жыл бұрын
On your brothers Goped all you need is a jet from an lh carb the current jet you have is more than likely to small
@jdbmoto
@jdbmoto 2 жыл бұрын
Thanks for the feedback on my brothers and I GoPed.
@OcRobb
@OcRobb 2 жыл бұрын
Where did you get parts online from?
@jdbmoto
@jdbmoto 2 жыл бұрын
Thanks for watching! DDM
@tjmower6029
@tjmower6029 Жыл бұрын
I replayed ur lil bros lifting groan soundclip『7:25』 about 30 times 💤 🛴 🗣️💨 🏋️
@jdbmoto
@jdbmoto Жыл бұрын
hahahaha! made my day! haha
@super1kbaby
@super1kbaby Жыл бұрын
I got a 2020 it use to start in running with no or but not it won’t run it started
@jdbmoto
@jdbmoto Жыл бұрын
More than likely it needs the carb clean as this machines are simple as they come. Carb cleaner works great to get them going and you can also try sea foam.
@derekabg
@derekabg 5 ай бұрын
They always run lol
@jdbmoto
@jdbmoto 5 ай бұрын
They do!
@ricerneon399
@ricerneon399 2 жыл бұрын
Would you be interested in selling one
@jdbmoto
@jdbmoto 2 жыл бұрын
Not right now, thanks for watching!
@minnesota7632
@minnesota7632 2 жыл бұрын
Youngsters 2022 mostly electric scooter top one go ped not their era
@jdbmoto
@jdbmoto 2 жыл бұрын
Thanks for watching! Its a cool little toy to play with, of course you can't compare to electric.
Making the Goped FASTER!
14:16
hondayamahafan
Рет қаралды 15 М.
Goped GSR25 I bought a GSR25 for $225 does it run?
30:30
Aaron Pratt
Рет қаралды 4,2 М.
Lamborghini vs Smoke 😱
00:38
Topper Guild
Рет қаралды 64 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 9 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 102 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,1 МЛН
Goped Pedfest 2023
14:56
Ash Goped
Рет қаралды 2,4 М.
Replacing the Top End
5:50
GoPed Ltd.
Рет қаралды 36 М.
Go-ped Bigfoot restoration part-1
19:34
AA Restorations
Рет қаралды 10 М.
First start Perkins GSR 46R Go-ped kings
4:18
J. Perkins
Рет қаралды 38 М.
Fixing a bunch of small engines
1:01:11
Andrew Camarata
Рет қаралды 2,5 МЛН
Arizona GoPed Ride 50+mph
11:52
K H
Рет қаралды 121 М.
Goped sport restoration part-1
16:04
AA Restorations
Рет қаралды 8 М.
Homemade 79cc Motorized Scooter Build Part 2
10:03
Vasily Builds
Рет қаралды 39 М.
Building a 2 Stroke Scooter!
9:09
Ben Weaver
Рет қаралды 4,9 М.
Lamborghini vs Smoke 😱
00:38
Topper Guild
Рет қаралды 64 МЛН