Gotrax G4 front tube replacement

[@415zur3]

Would be very helpful if you could name or link the tools you used, coming from a 19 yrold who doesn’t know anything abt tools 😅 thanks for the help though

[@alexoborne5419]

What size are those wrenches to take the wheel off the scooter

[@anthonyf1548]

Gonna try this I just got a flat on my rear tire, same model. Where do you get good tire tubes? I’ll just replace both since the rubber is crap

[@DaBinChe]

Amazon or ebay

[@overlordsaspawn4260]

What are the measurements for the 10" tire gotrax inner tube?

[@nadiasalman1545]

What size these wrench you using

[@TreyTheTruthJones]

Idk how u got your wheel to jus fall off like that. Youd think mines was glued on 😤

[@MattXShaver]

I can’t even get the first 2 bolts off the remove the tire… how did yours come off so easily? Also they are not size 19 for me. They are size 18.

[@sanfordrabin]

Does anyone know of a spare inner tube replacement that would work for this, gotrax is out of stock.

[@satwikkhanna6164]

Hey did you get a replacement for the same? I have got the same problem and not finding the tire or so

[@LL-tz8lo]

quick question... why did you need to separate the 2 piece rims? why not just use a tire lever to lift off one side of the tire, pull out the flat tube, insert flat tube, then tuck the side of the tire back in? (just like how you'd change a bicycle tire?)

[@DaBinChe]

Faster and easier

[@AtTheHandle]

Because that’s how they designed the tires to be changed!

[@tonyholmes4788]

It’s made to make it easier to change all wheels should be this easy no lever needed

[@tonyholmes4788]

And another they made it so you can’t use a lever you got to separate it it’s how they made it but it’s actually easier

[@demonikspartanable]

What is the actual size of the tube? I have a flat. Gotrax does not have that tube in stock.

[@DaBinChe]

tube size is based on tire size

[@demonikspartanable]

Does the g4 have different tire sizes?

[@DaBinChe]

@@demonikspartanable It has 10" tires

[@Scox61]

I have a rear wheel and motor assembly for a Gotrax G3 and my scooter was stolen! Would love to send this off to someone who can use it for super cheap.

[@prayernoyogiere6588]

Amazing video! What are all the tools you used? I need to replace the back tire for this exact scooter! Also, any recommendations on really good inner tubes?

[@DaBinChe]

butyl rubber tubes works is best. If you want puncture protection use Stan's Notube sealant in the tube, one once should do.

[@guzman12349908]

Where do I get a dog that can piss on my bolts?so they can get loose?

[@DaBinChe]

you can piss on it yourself

[@SlawKingOG]

😁🤣😂

[@SlawKingOG]

@@DaBinChe 😁🤣😂

[@demonikspartanable]

I came here for advice. But I received some good humor.😂😂😂

[@mariabrambila1513]

Hello! I am wondering if you can provide the links for the tools used in the video or the name of each tool. I believe I found the correct size for the wrench on Amazon, but am having trouble finding the smaller tool you used to unscrew the tiny screws. If possible, can you provide links for all tools used? Thank you!

[@DaBinChe]

5mm Allen is what you are looking for. What I'm using in the video is a 5mm socket on a 1/4" drive socket wrench

[@monkiedeinhau557]

Does it matter if you fliped the tyre inserting. I realized that your tyre rim Left and Right differs from what it begin with.

[@DaBinChe]

no

[@user-vj2oc6pf6e]

Put the new tires in the oven for a few minutes get them nice & warm & you will save yourself a half hr

[@Damonm68]

Is there some kind of substance you can spray into the tube to help resist flats?

[@DaBinChe]

Look into bicycle tubeless sealant like Stans etc.

[@RecordOneEnt]

Is the direction to take off the bolt the same.

[@DaBinChe]

not sure which bolt you are talking about

[@jeffreywu7311]

The gotrax g4 is out of stock front tire tube do you know any similar for it ? Please

[@DaBinChe]

just amazon or ebay that size

[@jeffreywu7311]

@@DaBinChe thanks a lot

[@MottoMani]

Learn people never use compressed air always use an air pump

[@DaBinChe]

compress air works fine you just need to adjust it down instead of using it at full pressure, which can be used to with caution. Mine is set to fill car tire pressures which is in the range of scooter/most bicycles/motorcycles tire pressures. Only tires I know that use over 100psi is road bike tires and truck tires

[@fernandoparra5947]

How can I find it? I tried on amazon but I can't find it :(

[@DaBinChe]

think everyone is out of stock

[@JeffersonFestus]

Hey what are these tools called?

[@DaBinChe]

which? at what time stamp?

[@LL-tz8lo]

you are the man! haha. china rubber is horrible!!!

[@DaBinChe]

yeah it is

[@elenabisotto1894]

Is it a 10” tube?

[@DaBinChe]

yes

[@elenabisotto1894]

Thank you! I am trying to find one on Amazon because Gotrax tubes and tires and temporarily sold out? Any suggestion?

[@DaBinChe]

@@elenabisotto1894 I got mine on amazon or ebay last year before the supply chain shortage.

[@princebryan8778]

@@DaBinChe is it ok for you to post the link to where you got your tube ?

[@DaBinChe]

@@princebryan8778 amazon or ebay just search tube size

[@AtTheHandle]

Anyways bud! What the fucks the size of the tube

[@AtTheHandle]

I did the rear tube it’s a fucking joke the time splits in two and you have to somehow put it back together without pinching the tube in there which is impossible I’ve relaplaced the rear tube going on 3 times in 2 days now

[@DaBinChe]

have a little air in the tube so it has some structure

[@AtTheHandle]

@@DaBinChe it was a shitty tube from Canadian tire a 10x2 not a 10x2.5 like it needs. And the stem was at a deadly right angle for some reason . So it never fit in there proper . I was sitting at a gas station with the air pump trying to put it together trying everything to not have the tube being crimped when putting trying to peice the rim back together and install the screws . It didn’t work it always gets pinched. Fuck the tube I bought a 10 inch solid tire coming on Friday Amazon prime baby let’s see if that works instead

[@tasifhussain4557]

@@AtTheHandle does it need 10x2.5? or 10x2.125?

[@darinmorgante7200]

3 peice wheels are tubeless you just silicone the seam after bolting them together

[@DaBinChe]

that makes it much harder to separate when needed

[@darinmorgante7200]

Sure of course I just mentioning that because most split rim and 3 piece rims are tubeless

[@gadingjuntak8230]

Hai poop

[@AtTheHandle]

Actually it isn’t a smart design whatsoever .

[@DaBinChe]

It is better than having to pry off the tire. That is much more work and very easy to puncture the tube while reinstalling.

[@AtTheHandle]

@@DaBinChe they made the lip on the rim so huge you couldn’t pry it off if you wanted . If it was a regular rim it would be easier for sure and ensure the tube stays intact on reinstallarion