Governor Actuator Calibration on Cat 300B series Excavator

[@easternequipment5997]

Thanks you, sir. I will try this. I don't have a manual so if this doesn't work I will order one. The machine just won't open full throttle right now. Again, thank you.

[@crunchybacon25]

During calibration should my machine be idling up?

[@hydraulics]

Yep

[@crunchybacon25]

hystat I replaced just my throttle cables and believe when I reinstall my motor something is off a little

[@Willtaorp]

Anybody asking how to access, hold the 2 bottom left buttons and the bottom right button on the monitor all at once for 5 seconds. Then enter... 0E 32 3A... then go to his 70 code he showed and go from there... Thanks for the video. Very helpful.

[@Willtaorp]

Just had my governor feedback wire from the motor go bad. And after going through the troubleshooting process discovered I needed a new governor assembly. I will use this process after I've installed the new one. Thank you for the informative video.

[@easternequipment5997]

I put a new throttle actuator on a 312B. I was told it needs programed to the machine. Is this how to do it? Or are they something else that needs done?

[@hydraulics]

this should work. if you need mechanical adjustments, the manual will be needed too but you can try calibrating first

[@mdfaisalkabir7581]

​@@hydraulicshow to select p mode

[@mdfaisalkabir7581]

Hi bro this option used but only 3 to 4 running step . Not veriable . What is the problem

[@hendrik1636c]

Why not show us everything from the beginning? No one knows how to get to that 70 P mode

[@hydraulics]

I did here: kzbin.info/www/bejne/r4WueoCJfcSef5o

[@jrabot2035]

Hello sir i have a problem 312B im trying to calibrate the machine but nothing happen monitoring error not to calibrate We bought new ecm the rpm only 1200 i want to 1800 rpm but fail to high what would be cause of this system sir im Lionel from Philippines your subscriber thank you for the tips

[@abdomkhatri9471]

MERCI bezaf

[@albertohernandezlopez1535]

Buena esplicasion

[@meilihuang-tb4st]

Dear friend I would love to join your network to see if there's a way to collaborate. Looking forward to connecting with you. Sincerely！

[@walidsaidi3356]

i have machine cat 322 bln