GP Kompozit Crash Bars | HONDA NC750X 2023

Рет қаралды 2,423

Күн бұрын

Пікірлер: 15

@abjem1 2 ай бұрын

I just fitted the same bars to my 2019X and they look great! I had to temporarily move the clutch cable on the engine housing on the top right hand side bolt and be careful not to pinch the fuel line on the top left left! Dont lose the spacers on the 2019 version but otherwise it wasn't too difficult to fit! If you had used the spacer between the supplied nut and the top bracket you wouldn't have the gap at the top!

@McBasharit 2 ай бұрын

@abjem1 I am pretty sure I used all parts, including the spacer. Initially I wasn't sure which side the spacer would go, I installed it in the way I did but was never too confident if it was correct. I'll have another look. Thanks for watching the video, and I am really grateful for your comments. Safe riding.

@shareknowledge365 4 ай бұрын

Well done. I'm encouraged to buy these for my bike. I hope they would fit the 2024 year model

@McBasharit 4 ай бұрын

Thanks. As far as I know 2024 model is more or less the exact same as the 2023 model, different colour options depending on the region, but overall the same. So they should fit. If you are still in doubt, I suggest get a confirmation direct from GP Kompozit website. I believe they are a Turkish company. Good luck.

@Bighitter786 4 ай бұрын

Maasha Allah!

@tyam6483 3 ай бұрын

How did those "sliders" work as highway pegs? Were they in good position for resting your feet? What is your height or inseam length? Were they long enough to support your foot?

@McBasharit 3 ай бұрын

@tyam6483 These sliders are not long enough to work as foot pegs and they are also very slippery. You may rest your feet for 30 seconds or so but can't expect anything more than that.

@tyam6483 3 ай бұрын

@@McBasharit Thanks for your prompt reply.

@Richard-dh8ny 3 ай бұрын

Great looking guards. I'm considering adding them to my to my 2022 NC750. My only concern is the strength of the sliders. Can you tell if there's any reinforcement of the section of the bar where the sliders are mounted?

@McBasharit 3 ай бұрын

@Richard-dh8ny I think the sliders are more of a show piece. I didn't note any strengthening. Bars are solid though👍

@Richard-dh8ny 3 ай бұрын

Excellent, hope you never need to put them to the test. :) One last question, how comfortable is it to place your feet on the sliders? In any case you now have many options for mounting real highway pegs.

@SmokeyES350 2 ай бұрын

How did you remove the 4engine mount bolts that hold the crash bars in place??? I cannot get them off at all ive tried everything

@McBasharit 2 ай бұрын

@SmokeyES350 you will need a socket size that fits the bolt, a socket bar, which is then attached to the rachet. Make sure you have the tools because you do not want to mess up the bolt head with the wrong tools. Of course, they are tight because they hold the engine. Good luck.