[NO AUDIO] See how to re-build a Husky 1050 air-operated diaphragm pump. Step-by-step instructions appear on the screen as the process progresses. Learn more about this and other Husky double diaphragm pumps at www.graco.com/....
Пікірлер: 13
@mcreixell16 жыл бұрын
What does the Diaphram Installation tool do? Why is it needed? What happens with the pump if it is not used?
@musicfreak20026 жыл бұрын
From my experience, the Diaphragm Installation Tool slows the flow of air, making it SIMPLE to move the shaft from one side to the other, which makes it easier to attach the diaphragms back onto the shaft. Basically, it's needed to make the job easier. If it is not used, you could apply too much air, cycle the pump too far (or fast) and you probably could cause damage to the diaphragm (that you just changed). I would personally recommend using the tool every time. Makes changing the diaphragms out a breeze.
@mcreixell16 жыл бұрын
Thanks for your responde Andy, We have several Graco Husky 716, 515 and 307 pumps. In the past we have replaced the diaphragms several times but we have never performed the procedure using the installation tool and the service manual that we have does not indicate that we should use such tool. Are we doing things the wrong way? Does doing this bring harsh consequences over the life expectancy of the pump? Will it bring operation problems? Cheers.
@icawijaya92173 жыл бұрын
Hello Sir. Let me ask you a question. How much does the GPM make?
@GracoProcessEquipmentDivision3 жыл бұрын
Hi Ica, the Husky 1050 can achieve flow rates up to 50 gpm.
@icawijaya92173 жыл бұрын
How about a husky 3275? How much GpM. And why is the pilot in there exposed to water. While the pilot was tightly closed? Thank you
@mrbones363 жыл бұрын
@@icawijaya9217 The 3275 has actually been replaced by the 3300 series with a maximum of 280-300 games. When the fluid covers are tightened the diaphragms are sealed so the air side is separated from the fluid section, keeping the pilots and air channels free of material.
@icawijaya92173 жыл бұрын
I work in a factory. repair the husky pump. there must be an obstacle on the pilot's part. and often wet in the piston
@mrbones363 жыл бұрын
@@icawijaya9217 I'd suggest reaching out to the processtech@graco.com email with details and description of your situation. They are very prompt and thorough in how they troubleshoot problems
@gulshanpremi40176 жыл бұрын
Good
@mexicalikidd2 жыл бұрын
Theirs no audio
@GracoIndustrial2 жыл бұрын
You're right. Older service videos like this do not have audio because they were made for people to follow along in noisy factory environments. We hope the instructions you see on the screen are helpful. For up-to-date information about the Husky 1050, visit www.graco.com/us/en/in-plant-manufacturing/products/general-fluid-transfer/double-diaphragm-pumps/husky-1050-air-operated-double-diaphragm-pump.html