Graco Pack 'N Play Care Suite Playard - Zagg (Assembly/Quick Setup)

Quick unboxing + build of the Graco Pack 'N Play Care Suite
No Tools Required
With another little rascal on the way, I have brought back another assembly video. This is just a quick setup of a pack 'n play by Graco. There are 4 ways to use this pack 'n play, and the way i'm displaying will be geared towards newborn use.
If you are interested in finding out more info, follow the link below.
www.gracobaby.com/home-and-ge...
#Graco #PackNPlay #CareSuite

[@denisebarajas2553]

Thank you! Our package didn't come with an instructions manual so we really appreciate this video!

[@DizzyDadProductions]

Aw, thanks for watching!

[@scottporter4524]

No instructions in mine either, wth.

[@rerun626]

You got instructions with yours??? Lucky 😤 At least I have you, you are my instructions now

[@DainaBelladon]

Best tutorial so far I am grateful for your help 🎉

[@QuatiaMiii]

Thank u, mine didn’t come w/ directions, but yours were straight to the point ☺️

[@eddie0x5]

Thank you for showing how to assemble the crib I was going mad until I found the directions lol

[@KeyDaRealest]

My bassinet is on the other side and the changing table is on the other side 🤷🏽‍♀️I’m so confused because that’s the only way it will go

[@shellypena6363]

This video is a lifesaver thank you

[@DizzyDadProductions]

Thank you for watching!

[@Maliksamuels33]

Listen to this on .25 speed. Music sounds like the epic ending to a dark sci fi thriller.

[@DizzyDadProductions]

Thank you all for watching. If you enjoyed the video, feel free to like/comment/share/subscribe. More videos coming soon!

[@michaelsumner6769]

Perfect video thanks

[@justinejones8488]

I didn’t see how you attached your bassinet. Mine didn’t come with instructions

[@LavitaBella49]

The loops are on each side of the netting that fits inside the crib. Just thread the pipe through on both ends and snap the pipes together.

[@ashleyledet5486]

I must need to switch tgings around because nothing is snapping into place

[@KirouChan]

This video was very helpful! The only thing is when I disassemble it the main part goes in the bag perfectly fine, but where do you store the net part, bassinet, and the changing table parts? I can't find an answer anywhere. Like am I missing another carrying bag? They don't seem to fit in the carry bag.

[@jessicarogers8284]

I'm having the same issues. Any luck on finding a answer

[@KRouse-jw9ys]

Thoseparts would be better put into a case agreed and i see the issue.

[@jfrobishow]

We got the lounger in with a little fiddling, but how do you remove it without too much trouble? Those push button/pin are way too stiff it seems. I have removed it, but unless I'm doing something wrong it's not easy to do with the pin underneath requiring that much pressure.

[@DizzyDadProductions]

Good question, my luck thus far have seemingly been using force. Will see if there’s any other tips circulating on the net, and post if I have any luck. 👍🏼

[@angelicaperez9364]

How do I wash/clean this?

[@indiawalker3480]

How did you attach the seat into the bassinet?

[@LavitaBella49]

The loops are on each side of the netting that fits inside the crib. Just thread the pipe through on both ends and snap the pipes together.

[@johnnasmith6933]

Question… so I misunderstood the instructions for how to set up the changer and I accidentally put the rods in backwards so the tubes are facing up with the white side 🤦🏽‍♀️ instead of down with the fabric side… how do I fix this 😅? I’m scared to take them out because I feel like I’m stretching the material ….

[@DizzyDadProductions]

That’s a tough one, I’m trying to imagine how that would look. I think I did that initially, and somehow managed to re seat them correctly afterwards. Have you had any luck yet?

[@minhajmunaz]

how do you like this few months into using it? I am looking at the same thing for my 2 month old. Is it good for taking from place to place?

[@DizzyDadProductions]

So far, we’ve used it everyday. There are a few additions that I picked up for it as well. (A different mattress, a lounger and some others. I might post an update on it. But to answer your question - very practical for moving around if needed, my one month old has used it since birth.) hope that helps!

[@franciscojcontrerasa1124]

Thank you for the video and for showing the assembly part, can you post a video of how to disassemble each part? I am having trouble with the new born seat canopy. I cannot figure out how to take it off? I tried pushing the buttons where the tubes connected but it does work.

[@DizzyDadProductions]

I’ll see about trying that, I’ll comment on this post again if I’m able to do so!

[@w1ckedbeautyTTV]

Currently having the same problem 😅

[@isaaclopez6247]

Good shit bro, sadly it took an hour hahaha

[@paulcoogle675]

Anyone else missing the connector tubes shown at 3:05? Know where we can order some?

[@jessylinendoll5528]

You can go on graco's website to see if they have it or do a search on Google for it. I am sure you can find them online somewhere

[@RDR18851]

we have been at this for 2 hours already and cannot figure out how to get that click for the two sets of rods. it is driving us insane

[@mizfit4479]

Make sure the bottom isn't down all the way. I'm setting mine up as I type this, I was getting ticked off. But yea, make sure the bottom is still pulled all the way up and then jerk the living crap out of the arms lol I had all to click, except one and boy I was getting aggravated.

[@RDR18851]

@@mizfit4479 it ended up being broken so we returned it!

[@PrettyFly4aMom]

Thank you so much for this video!!! I was about to throw the whole thing at the wall and say fuxk it no baby is gonna sleep here!!!

[@aunastasiabolding9253]

What exactly are you hooking the nesting part through?

[@DizzyDadProductions]

Are you talking about the canopy on top of the bassinet at around 3:25 - If so, there is a pocket/liner on each side that the metal pieces I'm fiddling with go through. Once the pieces are in the liner, they snap into each other. I hope that helps!

[@susantiago9966]

I got confused at 3.25 having hard time

[@DizzyDadProductions]

@@susantiago9966 I wish I had a better suggestion other than to wrestle with it haha. It's probably the only downside I encountered - setup wise.

[@mingehuffs]

@@susantiago9966 I think I can help as I had the same problem trying to figure this out: the bassinet (the mesh piece that clips to the sides and hangs in the play yard) might need to be switched around. I had the pocket/liner side Dizzy Dad mentions under the changing table side. I'm guessing if you unclip the hanging piece and flip it around the other way, you'll see what he's talking about. FYI my new born seat came assembled so I had to unhook the frame to slide it through, then reattach. Other than that, great video!

[@DizzyDadProductions]

@@mingehuffs I could not have said it any better. Cheers, Mitch!

[@leemaghosi8383]

How are you hooking the lounger?

[@DizzyDadProductions]

Hey Leema, I think you are referring to the canopy on top of the bassinet at around 3:25 - If so, there is a pocket/liner on each side that the metal pieces I'm fiddling with go through. Once the pieces are in the liner, they snap into each other. I hope that helps!

[@leemaghosi8383]

@@DizzyDadProductions it is...thank you! I finally got it attached because of you :)

[@emmarobinson6202]

Yes

[@DizzyDadProductions]

Agreed!

[@blaqmermaiid]

Missing the part on how to connect the bassinet to the playpen. Im guessing u have to put the tubing into the little loop holes on either side.. i know for sure there must be a way to secure the bassinet in.. my parents put mine together and it was loose

[@LavitaBella49]

Yes, the loops are on each side of the netting that fits inside the crib. Just thread it through and snap the pipes together.

[@tiffanybritton8454]

​@LavitaBella49 can you post pictures. We just got one of these from someone else and can't figure it out either

[@LavitaBella49]

@@tiffanybritton8454 I can't figure out how to post a picture. But take out the changing table just to make sure you are not covering up the tabs. Look for a strip on each side of the inside of the netted part that attaches to the pack and play. (The top canopy) Mine has a black tab to show you where to thread the pipe through. Let me know if you found it. If not I can try and upload a video and send you a link.

[@emmarobinson6202]

Yws

[@reesef7724]

👍🏽

[@hbksean93]

Why would you skip over the newborn seat installation! That’s why I’m here! Lol

[@TheBlee123]

Same .. I can’t figure that part out!

[@kaylaalovesyouulotts]

Right like done fast forwarded it through the part we need

[@tasnuvarahman9928]

How did u attach the bassinet?

[@jhccb123]

What the!!!? That’s exactly what I’m thinking. Come on dude if your going to do assembly get it right! So close!

[@jenyffertineo]

Year later , any idea ? I am mad I can’t figure this out

[@chrisochoa3192]

Would’ve been nice if you talked and said what to do

[@oliviaphillips7378]

This is hard to put together yall talk to much not enough showing us