How to create chapter-based figure and table numbers (Thesis/Dissertation Formatting)

This tutorial shows you how to set up your Word document for chapter-based figure and table numbering. This video uses the NC A&T Thesis/Dissertation template, available at: www.ncat.edu/tgc/continuing/thesis

[@Kevitalks]

Thank for giving ideas. This technique was what I was looking for. Really helped in my thesis

[@emirkarakus1808]

Finally, there is someone who explains my exact problem... Thanks :')

[@shirinmacias557]

This work great for my Thesis. Thanks so much!

[@lauracoleman6658]

Really helpful and has saved me lots of time! Thank you

[@jimohdhikrulahi8409]

Thank you. It's really time saving for my master thesis.

[@anujjoshi4591]

This saved me today. This video is amazing! Thank you :)

[@makgatjejacobphala9602]

Highly appreciated. This is great stuff

[@sarveshbadiger275]

Something i have been looking for desperately... i was so frustrated about that "0" popping up every time and ruining the entire document. Thanks a lot sir for this.

[@shafqatullah6666]

Excellent.. thats what i was looking for.. You're life saver!!!

[@sahilsingh98118]

Thank u so much sir, You made my day, Lots of love from Nepal😍

[@Briony28]

Exactly what I needed thank you!

[@doraduplessis2727]

There's a much easier way of doing this. I use DEFINE NEW MULTILEVEL LIST, then when the Enter formatting for number comes up, I just type Chapter before the 1, and link that to Heading 1.

[@fathimzhr7228]

thank you so much, this is so much easier

[@refaelnaibaho5252]

Thank you so much for the solution.

[@doreenkwikiriza8239]

Where do I get the new multilevel list??

[@doraduplessis2727]

@@doreenkwikiriza8239 it is on the Toolbar for PARAGRAPH. First bullets, then numbering, then multilevel list. Choose the one that links to headings.

[@quartercast]

Thanks for this tip. I had already created a document with numbered figures and tables before trying this, therefore I had to apply this by inserting a dummy caption once again and linking to Heading 1. Once this was done, it had been applied to all figures and tables and I deleted the dummy caption. After a lot of updating fields, my document is looking good 👍

[@dr.muhammadafnantalib5941]

Thank you so much for this valuable stuff.

[@mmitchellhouston]

Thanks. This is very straightforward.

[@nurhaninahharun1861]

thank you very much. the best video tutorial. simple and direct.

[@kamaljeetkaurbawa472]

This was so helpful. Thank you so much.

[@ahmedalarbash8570]

short and great helpful video .thanks a lot

[@Anadus-Health-Lifestyle]

Best Explanation of subject matter!🍉

[@summerliu5419]

Really helpful! Thank you so much!

[@JohnIgnou]

Thanks man, that was very helpful!

[@yijingwang7308]

Thanks for your teaching. But if I use custom styles instead of default styles like heading 1, there will be some errors occur. How to solve it?

[@Chisscaso]

whoever you are, you just saved my life.

[@refaelnaibaho5252]

Thank you so much for the helpful tutorial.

[@Orthodoxtewahidomedia]

Thanks ,Finally, there is someone who explains my exact problem... also for me thanks once again!!

[@metallica4955]

thanks, it helped me even in 2021

[@ahmadkhan3276]

Thanks you saved two days work for me

[@sudiptobharadwaj4178]

Great Help. Thank you very much

[@bamokinamoandadestin7888]

Thanks a lot! I subscribed to channel! Keep the pace please!!! Very helpful!!!

[@muhammadjunaid9681]

Thanks you are a life saver may God Bless you

[@mohamedsayedhussein]

Thank you for good and detailed description

[@ShahbazKhan-fy9ut]

Alhamdulillah Thanks man, saved a lot of time.

[@shibeshiabebaw5426]

It is really important!!! Thank You!!!

[@gabrielgamana2456]

Very informative, thank you

[@yassine462]

You saved my day

[@thulanimthembu5777]

Thank you so much best instruction

[@kshitizrimal5269]

Thank You So much man ......

[@DinukaSachith]

Thanks, Buddy, really helpful.....

[@abiramykrishnan6909]

Very useful. Thanks

[@abomohamedalrubee5287]

Thanks for this good video

[@tommymerelte4399]

Thanks, helped me alot

[@eyosiyastesfaye2682]

THANKYOU SO MUCH SO USEFULL

[@naeem6583]

Thank you very much. But, you got me thinking...Its almost 2020 and ms word still can't figure out one of the biggest ' problems' in thesis writing? It made me question if the people at Microsoft ever go to school.

[@kimekyungu9180]

dude, im thinking the same thing rn

[@basharatali4394]

Very Helpful video

[@KhangLe-ew5ok]

you earn yourself a subscriber sir

[@Behnamikdd]

Thank you very much.

[@xRS23x]

Cheers mate!

[@SyafiqZaidi71]

Thank you.

[@bismarkconney4866]

That was great. Very helpful. I want how to insert page numbers starting from page 3 with Roman numbers

[@onlyconstruction1243]

Thankyou So much Sir.

[@maekiok231]

Hi, I can’t find “CHAPTER HEADING” in styles. Even in the Show all in Styles Pane

[@user-qt2tp1cf3w]

I don't have the chapter heading style!

[@maekiok231]

Same!

[@NASIRABBASKHAN]

you are amazing

[@adnan565]

North Carolina A&T Graduate College. Sir If I have Chapter 1 Section 1.1 Sub Section 1.1.1 And Here Figure no will be ?????????? Fig 1.1 or Fig 1.1.1 ??????

[@anialiandr]

saved my life

[@paulusgrahamjohnson6287]

But how do I link the figures to sub-chapters/sub-topics within a chapter? Is it the same process? Like what should we do to tell Word that we are starting a sub-chapter within a chapter?

[@valadisdagreek]

Lifesaver!

[@hariombhu]

thank you so much

[@nakazibalinda485]

How can I have "chapter one" instead of "chapter 1" while maintaining the chapter number on the captions?

[@sfisomahlaba7822]

I followed this same steps on my thesis but as soon as it gets to 1.3 or 2.3, it goes back to 1.1 or 2.1 in that same chapter please help me.

[@fathimzhr7228]

thank u so much

[@schewcheng]

How to enforce Caption without Level 2 Chapter Number? E.g., for chaper 1.2, The table reference I want it to be 1.X instead of 1.2.1

[@conceptualacademy2217]

Helpful. Thanks for Jugaars

[@abdelkbirwiss]

Thank you :OOOOOOOOOOOOOOO

[@dannylee86]

very very good.

[@krishnatejus2388]

hi !!! i need chapter in roman numerals and and table/figure to have decimal numbers could you help me with it....

[@jhawks1510]

But what if you want to link to different headings...or if you want to include chapter number for some of the figures but not others? Like what if you have Appendices which have a different heading number style (i.e., 'A, B, C' vice '1, 2, 3')?

[@doraduplessis2727]

You can still use it and just delete the word "chapter". Or you can make a different heading style (I name it HEADINGS) and link it to heading 1. I use this for declaration, Table of contents, list of figures, etc.

[@Peachu2411]

​@@doraduplessis2727 Hey I'm glad to see that you're trying to help out everyone. Can I get a reply from you now if you know this. I'm suffering and crying due to this, as my supervisor said I've to insert chapter based figure number like 1.1,2.1. I've done this by following this video but the problem is there are numbers in my table of contents like 1.chapter 1. How can i remove this numbers from table of contents? When i try to do this my all figure numbers messed up and it becomes 0.1,0.2 like this. If you know the solution please help me

[@doraduplessis2727]

@@Peachu2411 I use DEFINE NEW MULTILEVEL LIST, then when the Enter formatting for number comes up, I just type Chapter before the 1, and link that to Heading 1.

[@harshanasupun7078]

Thanks boy 😍

[@acrobaticjazzie]

OMG Thank u i was about to cry

[@yasarkhanw]

Only if I could give you a Noble Peace prize for this.. Thank you tons.

[@xhanalexander]

genius I didn't think of that

[@amlecciones]

What if all the figures already exist and we need to redo existing captions?

[@mabdullahcheema2692]

good job

[@anb4351]

I used a template but it's just not getting the chapters , it is always creating chapters of it's own and ruining the template

[@afianarohmani1179]

Hi. Still not working on me. Still appeared as 0.1 0.2 0.3 0.4 . Could you please help ? Maybe I missed something

[@taufanjuliano3515]

If you want to Caption Table with include chapter see this video.

[@jsjxyz]

My Univ chapter is Roman, but the caption in numerical.

[@balveersingh3051]

another thesis formating geek here

[@zenu1982]

cool

[@nanciecombs5428]

What about tables.

[@cocainegame95]

Not working

[@jean-bosco729]

A+

[@jainjacob8121]

THIS technique did not work for me. A

[@mesfin89]

5:26 You cheater!!! hahaha

[@PEPPABABE]

That is the worst way to format in MS Word if you do this when you work, you will drive your colleagues insane as you are not setting up the formatting correctly. DO NOT DO THIS.....MS Word is not like a type writer....just making the number appear in white font will actually mess the other Chapter numbers up!

[@MY-wl2rf]

This technique did not work