Grand Marquis Muffler Delete

[@nathanvarnis1329]

You know you're making a good choice when you're holding a reciprocating saw and you say out loud "Alright, fuck it!"

[@seanmckay3392]

no its a sawzall

[@counterthirty]

@@seanmckay3392same shi

[@philbyrd2349]

The only way

[@bigggmustang73]

Doesn't even need a muffler. Still so quiet with that single pipe : )

[@philbyrd2349]

Yea it really is

[@wileymonair]

I did muffler delete Rear cat delete Added glasspacks Sounds so good and not too loud at all. Just right 👌

[@philbyrd2349]

There you gonna Ik you loved it

[@henrysmith7614]

I'm about to do this to my grand marquis! Especially since I just put in new coil packs plugs fuel injectors racing cold air intake!

[@philbyrd2349]

Do it man it sounds so good

[@Cyberknight189]

To the people who are watching you irl, they probably think you're stealing the cat, lmao

[@philbyrd2349]

Nahh they know I work on cars haha

[@VeneerSlinger]

How do you guys not have leaky intake manifolds?!?!? I can't get mine to stop leaking

[@hazeone480]

Mind leaking coolent

[@philbyrd2349]

Gaskets were fine thankfully but there known for having bad intake manifolds

[@philbyrd2349]

There known for having bad intake manifolds

[@xSlumV]

@@hazeone480get a Dorman after market intake and Rtv it around the coolant ports, let it sit for a day and then run it… had the same problem on my 05 4.6l grand marquis… leak sealed 🤌🏿

[@crayshaunhenderson1265]

i brought the car in september 2021 and the car was sitting in the driveway for 5 months and then i started to drive the car and it's making a noise like that when i press the gas i thought i was having a valve train noise but i don't think that's the problem. i changed the oil and now it's making that noise only when i press the gas. i change the spark plugs the air filter pcv valve change the motor oil and filter clean the throttle body and the mass air flow sensor i didn't change the fuel filter yet but i will so what can that noise be when i press the gas

[@philbyrd2349]

Cant diag it without seeing it

[@BOORAGG]

As the jack began to fail he said..............I FORGOT THE JACK STAND!

[@philbyrd2349]

Safety first

[@Shytheweirdo]

Im in jersey how much do u charge for this?

[@parkerboi9115]

The tail pipe was 2” to ?

[@savageart4439]

dual exhaust would be amazing

[@xSlumV]

Where did you get the after market 2” down pipe and 2” pipe connector from?

[@philbyrd2349]

Just went to my local AutoZone

[@xSlumV]

Thanks man! 💪🏿 I appreciate that

[@parkerboi9115]

So you connected it with a 2” pipes

[@jkink8049]

Your from jersey I see I am too. That is a sick looking mgm I love it same color as my 02 town car

[@philbyrd2349]

Aye and yea the cousins car is looking good

[@davidshady1854]

What size tires are you running on those mustang wheels? I see there are two different stock sizes, so I was just wondering.

[@rxmarlo2303]

How do you comnect the new pipe to the old one? if factory is 2 inch i need to get 2.5 for it to go over and clamp?

[@philbyrd2349]

2” connection piece

[@matthewgreenlee4631]

Just did this on my 97 Grand Marquis LS with factory duel exhaust. I put aftermarket mufflers on it though.

[@philbyrd2349]

Hey it prob sounds better then stock

[@jakethesnake4971]

Brother you're tearing up your car doing those burnouts

[@philbyrd2349]

We love burnouts over here haha

[@josephhughes318]

What size is the stock single pipe 2” inches?

[@philbyrd2349]

Correct

[@miamimagicians]

What does this accomplish? Does it change the mpg? Does the car go faster

[@yeanah2571]

Mpg stays the same, and no, this is budget sound better stuff

[@blur3253]

a tiny bti but barely noticeable

[@philbyrd2349]

Not at all just for the sounds

[@zertishog5792]

Yo boss did that cat delete fail emissions ?

[@philbyrd2349]

no it was fine with this vehicle

[@socastee_5.097]

Yo pls be able to tell me . i got a 2002 grand marquis and im looking to get the same mustang rims . so did you need any spacers or anything?

[@yeanah2571]

No. They stick out further, because of the offset, but usually that's the point.

[@philbyrd2349]

You may or may not depending on how you want the fitment to look

[@08_crown_vic]

What parts do I need to do this on my crown vic both sides?

[@crayshaunhenderson1265]

i want to change my muffler and the y pipe and the catalytic converters on my 2004 mercury grand marquis ls cause i don't like how it looks

[@philbyrd2349]

Get to it and make it sound nice

[@EinsteinFiuza]

What is the diameter of the pipe that I need to replace the muffler?

[@philbyrd2349]

2”

[@EinsteinFiuza]

@@philbyrd2349 thanks dude!

[@composer772]

these things are the quietest cars to exist lol

[@Zoomin69]

4 cats

[@philbyrd2349]

Frfr and they need to breath

[@composer772]

@@philbyrd2349 i’ll miss my grand marquis someone fender bender me 2 monthes ago and it got wrote off 😢 but i’ll get another in the future they are comfy cars

[@nickbizzaro2808]

are the stock axels still in the car?

[@codyrebelcb]

Yes, why would you ask that? Why would it have/require different axles?!

[@nickbizzaro2808]

@@codyrebelcb Im just making sure because I know that sometimes, stock axles aren't made for burnout because they can shear off if youre not careful. I know the video is about the exhaust but my b

[@philbyrd2349]

Stock Stock Stock

[@philbyrd2349]

That’s for big hp numbers though so we’ve had no issues with them

[@quad7288]

Did you notice any power loss? I just did this and I feel so much stutter now when gassing it…

[@eastsideplayaaa]

There's no power loss

[@rxmarlo2303]

Did it end up fixing bro im planning in doing im worried now?

[@seanmckay3392]

Yeah probably because you cut the CATALAYTIC CONVERTS off not the mufflers and your o2 SENSORS ARE GIVING YOUR ENGINE TOO MUCH FUEL BECAUSE OF A FALSE READING

[@philbyrd2349]

No power loss at all

[@philbyrd2349]

Correct

[@Damayor-vk9kc]

Man it sounds great put up another video about wat u have done to it and is it a good car to buy as a daily driver

[@woo123ify]

I drive an 06 as my daily and they're pretty beastly! Very smooth ride and they got a little power

[@yeanah2571]

These cars are pretty dependable, parts are pretty cheap, and are easy to fix. If you're in the rust belt, just make sure to check the frame, because it's built kinda like a truck.

[@elflash1542]

Please lmk what year this marquis is

[@philbyrd2349]

03

[@dimitribearden2510]

Man what you did to that engine

[@philbyrd2349]

Stock except exhaust haha

[@luiscruz3147]

Yo también tengo un gran Markis , le quitaré el silenciador y le pondré igual un aumento y una pipa me encanto como sonó

[@Krisvecc]

Yo i gotta 03 grand marquis, what rims are those?? They look like they ones on the mercury marauder

[@louieg4815]

They're mustang bullitts

[@yeanah2571]

Marauder has bigger chrome 5 spokes, like the man said, Mustang Bullitts

[@miamimagicians]

I love the marauder rims

[@philbyrd2349]

Mustang

[@darkmachine165]

I figured it would be louder after cutting entire exhaust off mine yesterday, not really sounds cool but not illegal cool, I'm guessing 90-93 decibels Motorcycle is louder in my opinion.

[@seanmckay3392]

whyd you cut your whole cats off and everything bro that is so stupid its gonna throw a code because of a false o2 sensor reading now and it wont pass inspection

[@philbyrd2349]

You removed all 4 cats, won’t pass inspection unless you know someone that’ll do it for a lot of $$

[@tommytomtomt]

Perfect example why not to learn from on the internet two things not even using a jack stand and not even replacing the entire pipe When you get fumes in the car and die of carbon monoxide because you didn't put a pipe between the pipe you cut out

[@BillyN31]

Where did you get those rims?

[@IndraShining]

They are the mustang wheels

[@philbyrd2349]

Watch our wheels video at the junkyard

[@williamsrishard]

Oh man you should have ordered you a 40 series to put on there just one would have done it all

[@philbyrd2349]

He was debating on what to get I said just start there

[@dominicchiro2400]

That out by atco? Also I’m in sj too. Got a p71 just picked up a tune and ordering trick flow heads

[@lukerusch785]

What tune?

[@dominicchiro2400]

@@lukerusch785 I got a sct tuner and Marty from moes speed shop tuned it

[@philbyrd2349]

No Tune

[@philbyrd2349]

Near atco

[@dominicchiro2400]

@@philbyrd2349 nice I’m not far but unfortunately got rid of my Vic now I have a charger lol

[@marauder3026]

I’m guessing u got codes by removing all 4 cats?

[@philbyrd2349]

2 rear cats removed with any codes

[@woodyj451]

Kid's always wear safety glasses.

[@philbyrd2349]

Yea don’t forget that lol I wasn’t thinking

[@SJ_MERC]

Got to cut them rear cats right after the o2 sensor . Sounds way better than the muffler delete

[@yeanah2571]

He's in Cali, both there and here in NY, that's a big no-no. They check during inspection.

[@SJ_MERC]

@@yeanah2571 hot smogs every year💯

[@philbyrd2349]

Took the rear cats off on a later video no check engine and passed inspection with no probs

[@philbyrd2349]

Suck for those states lots of tickets if caught

[@smokeshop1060]

Will doing this Effect my engine?

[@philbyrd2349]

Not at all won’t throw a check engine either too far from the o2 sensors

[@alanholmes2366]

Less back pressure may give you 5-10hp. Exhaust on these is heavy and restrictive...

[@yeanah2571]

@@alanholmes2366 possibly, I mean you see the size of that ravioli muffler he took off? OMG, should be something all us MGM drivers do

[@yeanah2571]

P71 H pipe, and a couple of Amazon welded chambered mufflers(Fauxmasters) and a couple dumps. Under $100 for dual exhaust dumping under the car.

[@jacobthereceiver3975]

Shiiit

[@rxmarlo2303]

Yea parts ate cheap the welding labor cost is what fucks it lmaoo

[@philbyrd2349]

That’ll sound nice

[@philbyrd2349]

Not at all would be nice to have a welding setup

[@buggzbummy7393]

Who’s page, the mechanic guy or the guy who owns the car? Lol

[@philbyrd2349]

My page the work done to the car is my cousins

[@kylecollins780]

See I got my first car and it's a 98 grand marquis and I wana make it sound good but for a cheaper price and I just need advice

[@fernandohinojosa7919]

just cut the mufflers off with a saw

[@uh3what]

buy new tire rods, this has nothing to do with sound but apparently those are common to go bad on 90's panther platforms, my dad's 96 vic is sitting in the driveway on jack stands cause the driver side tire rod broke. it's all sorts of scratched up underneath.

[@yeanah2571]

I got a pair of welded FlowMaster style mufflers on Amazon for like $65. Mine will be attached just before the Y pipe, so just beneath my seats with turndowns.

[@philbyrd2349]

That’ll sound good

[@philbyrd2349]

Cheapest way and good sound

[@roberthogate6310]

i dont see a jackstand anywhere !!!!

[@philbyrd2349]

🤷🏽‍♂️ invisible 👀

[@6gendj584]

My 11 needs some type exhaust bad...it sounds like a granny car

[@philbyrd2349]

They all do lol but DIY or exhaust shop

[@6gendj584]

@@philbyrd2349 I did the Jones xpipe,FX mufflers and rear cat delete...she sounds great now

[@evananderson6005]

I’m going to buy this car on Wednesday 😭😭

[@tcl0028]

Non car guys: "if you wanna use an electric gun it's a lot faster"...

[@ZerkSaysWTF]

Aye bro out of NJ, just followed you on insta

[@philbyrd2349]

Thanks for the follow

[@Unpluggedoutofmatrix]

I heard that messes up the valves

[@Carado5150]

Dumb

[@philbyrd2349]

Nope

[@aceneto9386]

Why don’t anybody just unbolt it? It looks like it just unbolts off lmao am I stupid or something?

[@halenberdeski6625]

Nah usually exhaust from factory are bolted into the car with hangars then welded together with the pipes

[@aceneto9386]

@@halenberdeski6625 mine actually does un bolt but it’s rust welded together lol

[@DLOCCCC]

Wya bro I’ll pay u to do mine

[@DLOCCCC]

I’m in Cali

[@philbyrd2349]

Always busy

[@philbyrd2349]

I’m in Jersey

[@andrew86fl]

Hell yea. I like it

[@philbyrd2349]

It sounds real good

[@ssgsschiraq8858]

Goated im doing this rn

[@philbyrd2349]

Your gonna love it

[@JayyMoneyy420]

I know this video old bro but for future reference jack the car up from the rear differential.

[@philbyrd2349]

Could jack it up at the diff or any other Jack points

[@Dabbo_007]

H pipe with cutouts or h pipe and just run dulls

[@jacobthereceiver3975]

What r dulls

[@Dabbo_007]

@@jacobthereceiver3975 duels my guy. Duel pipes? Dulls is a term we use around where I live l.

[@Carado5150]

​@@Dabbo_007dulls is dumb. You might live in a dumb place.

[@philbyrd2349]

Stock h

[@AztecDread]

Use a cut off wheel next time smh

[@codyrebelcb]

No. Just no. Sawzaw for exhaust. Cut off wheel for bolts.

[@philbyrd2349]

Saw way faster

[@philbyrd2349]

Way quicker with the saw

[@SRT92]

Dude tryna set you on fire with a cut off wheel 😂😂 not for that small pipe lmao 😂😂😂​@philbyrd2349

[@AztecDread]

Yall 🥧 asl 😭 grow sone 🥜

[@davidkopos3453]

nice burnout

[@philbyrd2349]

Haha Ik right I’ll tell him you said that

[@howardganzer4721]

If you do some headers on it be louder

[@philbyrd2349]

It would be but more money