Graphite Conductive Paint for Electroforming

[@marsharice4799]

I love trees!!!

[@cuforming]

Sorry, too late. You can find the recipe here: www.cuforming.com/tutorials.php

[@donxgraphics]

Love your method Acrylic paint 4g to 1g graphite powder and a teaspoon of water works wonders too and much cheaper

[@cuforming]

Thanks for sharing!

[@donxgraphics]

​@@everardocoelhogomesfilho4618O que você quer dizer

[@donxgraphics]

​Não é tão condutivo que você precisa para realmente polir o brilho. A primeira melhor aposta é com esmalte acrílico

[@suicidebylifestyle9267]

I have graphite ariving tomorrow and I'm planning on trying this method, I don't suppose you can run it though an air brush?

[@cuforming]

I wanna give thanks to all my subscribers and supporters so, to celebrate 200 Subscribers and the “Love a Tree” Day, I will announce 10 giveaways of this recipe in my next Video on May 16th. Please subscribe and comment “I Love Trees” in the comment section to be selected for the giveaway of the Conductive Paint Recipe. Thanks to all of you!!! ❤🌲❤🌳❤

[@PUR3C0UNTRY]

If I seal my leaves with matte spray sealer -can I use this afterwards, or will it eat through the sealer? And…will the solvent in this eat away natural gemstones? Thanks!

[@cuforming]

With this paint, you don't need to seal organics. The sealant I add is good on its own for the job. The time of drying will be a little longer with fresh leaves, thought. Gemstones are gonna be safe with it. Thank you!

[@PUR3C0UNTRY]

Ok, thanks for the reply!

[@rolandcsaszar206]

What solvent and sealer have you used? I have tried different methods, using 1.alcohol 2. Acrylic paint. But with these the copper would flake off… Can you share this or maybe suggestions? I am trying to electroplate 3d printed items. (Resin)

[@cuforming]

I sell the recipe here: beacons.ai/cuforming

[@ЭльдарСейдаметов-к8с]

Иди на кухню с рецептом, продажник, балобол. ​@@cuforming

[@ThomasEucat]

where is the recipe?? does someone has the exact link ?

[@cuforming]

www.cuforming.com/cp.php

[@abrahamvalentin3225]

How long did you leave it to dissolve?

[@cuforming]

Around 2 hours without touching it

[@robinyilmaz1155]

Incredibly useful video! When dipping the part directly into the paint, how thick does it dry up? Does it leave visible drops/clumps?

[@cuforming]

Thickness depends on the concentration. To avoid drops or clumps, I just make a centrifugal movement to make all the excess paint detach from the piece. I do that inside the container, so it doesn't go all on my workbench.

[@robinyilmaz1155]

@@cuforming ah alright. Have you had issues with the thickness of the paint causing loss in detail of the part? Because in the video, when you dip that little turtle in, it seems to leave quite a think layer. Or does that thickness kinda dissappear as it dries?

[@cuforming]

@@robinyilmaz1155 You need to wait until it dries... contact me on Instagram, I'll show you a picture of that same turtle finished.

[@robinyilmaz1155]

@@cuforming I successfully slid into your instagram DM's

[@jesseedson9385]

Can you provide a link to where I can buy the solvent and sealant? The recipe is a bit vague.

[@cuforming]

There is a link in the description with the recipe itself. In the pdf file, you can find links to Amazon and eBay for the materials.... Graphite conductive Paint Recipe: beacons.ai/cuforming ..... If, for some reason, those links aren't working anymore, contact me on Instagram or Facebook, I'll help you find the products you need.

[@cuforming]

And if you didn't do it already, subscribe to my channel!!!!

[@TangoSierra-er2ne]

£9 for pdf

[@eCitizen1]

There is NO RECIPE at your link to a recipe. What happened?

[@cuforming]

Recipe is here beacons.ai/cuforming

[@eCitizen1]

@@cuforming Nope, No recipe there

[@dragonfire2371]

@@eCitizen1 solvent looks like it could be acetone, sealent i dont know.

[@blueboogey]

​​@@dragonfire2371paraloid b-72 is the sealant

[@vladislavpishiev3065]

Is this graphite paint enough durable for car headlight reflector?

[@cuforming]

This graphite paint is very durable. Its purpose is for electroforming and plating. What are you gonna do on car headlight reflector?

[@vladislavpishiev3065]

Thanks for reply. I want to chrome plating headlight reflector, but it is plastic detail with high temperature and I need durable conductive paint. I think I found it now 😊

[@cuforming]

@@vladislavpishiev3065 I can't give you any insurance about high temperature. The binder in this product will melt with high temperature.

[@vladislavpishiev3065]

At high temperature I mean the temp that the headlight bulb created. I think it'snot over 70-80°C

[@cuforming]

@@vladislavpishiev3065 I know that the maximum temperature for the binder is 50°C, but since it's mixed with graphite, the range could raise to 80°C or even more. This matter necessitate of tests in different conditions.

[@jozefnovak7750]

Super!

[@cuforming]

Thanks!!!

[@artbysquids6779]

I Loooooove Trees!

[@cuforming]

Hey, go check my latest video for the giveaway!!!

[@matteobuaciao]

Thanks so much 🙏🏼

[@kinggenghis9192]

The ingredients and recipe seems to be gone from your website. Can you repost it?

[@cuforming]

Sorry, links are small... website.beacons.ai/cuforming/tutorials-shop

[@kinggenghis9192]

@@cuforming amazing! Thanks so much! Keep it up!

[@AnaRogeria-kp8lv]

Olá bom dia, onde encontro a receita da tinta condutiva?

[@cuforming]

no meu site www.cuforming.com/tutorials.php

[@innar80]

If is possible to use the copper powder?

[@cuforming]

Yes, it's possible. Maybe you can lower the quantity, I've never tried with copper powder. You need to experiment a little.

[@innar80]

@@cuforming I bought your recipe, I'll try using copper powder 😃

[@cuforming]

@@innar80 Yes, I saw that. Thank you for your purchase. If you need anything, contact me on Instagram or Facebook, I'll be happy to help you. I just got some copper powder my self, I will make some test and see what happen. I'll be happy to share my experiment with you.

[@irinamackay8599]

I love treees

[@SHRUGGiExyz]

Is the sealant you're using pellets of acrylic (same as plexiglass) dissolved in acetone? If so. That's a pretty genius method to getting a hard and durable coating impregnated eith graphite! I have a couple sheets of plexiglass from old displays, and was wondering what I could use the cut offs for, since I'd hate to waste them. Seems like a fantastic use for them! Keep up the good work 🫡👍

[@cuforming]

Thank you for the appreciation. If the plexiglass dissolves completely in the acetone, that can be done. Some kind of acrylic or polystyrene usually don't get liquid, they only reach a gooy state.

[@terrynoles8539]

Polaroid B-72, with acetone as a solvent works the best. This is what it was designed for, ie...sealing, adhesive, consolidation, etc. It is what is used with fossil preparation and conservation.

[@mflipse]

@@terrynoles8539 And that is exactly what it is. Paraloid b-72 (not Polaroid 🙂). @cuforming This is not your invention, but you're selling the recipe like it is your own invention. I bought the recipe just to see what it was. Out of respect, I will not publish the % of the ingredients. Shame on you. And btw, use your own voice instead of an AI dubbed audio track on your other videos.

[@terrynoles8539]

@@mflipse Yeah, sorry, Paraloid...my fingers got ahead of my brain for a bit.

[@hsavidge]

@@mflipseCan you share the recipe with me?

[@ALaVeyy]

Wow everyone in the comments..really loves trees 😅🌲

[@cuforming]

That was for the giveaway on the following video where I made a copper tree.

[@mrmike4228]

I LOVE TREES!

[@poojaprajapati2404]

I can use real fresh strawberry ?

[@cuforming]

Fresh strawberries have a lot of water in them which is gonna be trapped inside and get rotten in a week. You could try that, but you need to make a hole in the copper layer and remove flesh and liquids. Maybe after the electroforming process, you can bake the piece at a low temperature to allow it to dry. There is a video of Elementric Artworks which makes a raspberry, and he burns it red-hot with a torch. I wouldn't recommend that because the copper will get annealed and soft, and could get deformed just by pressing it with your fingers.

[@zeka4907]

Love tree 🌲 ❤

[@cuforming]

Sorry, too late. You can find the recipe here: beacons.ai/cuforming

[@zeka4907]

@@cuformingsorry I live in Iran and I don’t have access to any page to buy or pay money outside of Iran, so I can’t buy the Graft condactive recipe.

[@cuforming]

@@zeka4907 I'm sorry to hear that! I hope that something will change for all of you!

[@zeka4907]

@@cuforming Thank you so much🙏

[@joelrodriguezdiaz7582]

I love trees, amo los árboles!!

[@cuforming]

Hey, go check my latest video for the giveaway!!!

[@alirezahorrihadafmandmachi5255]

I love trees

[@Leo-gt1bx]

Solvent sealant could be anything.

[@cuforming]

You can find the recipe in my shop www.cuforming.com/tutorials.php

[@mattiafiorini]

I love trees

[@cuforming]

Thanks, but you are too late for the giveaway. If you are interested in the recipe, you can find it here: website.beacons.ai/cuforming

[@SAMEDOKAWA]

"Hello! In the airbrush method, what nozzle diameter did you use? I've tried and the airbrush gets clogged... :(

[@cuforming]

I actually don't know the diameter. I use the only one that came out with it, and it also gets clogged... but I only use it with the graphite paint so it's not a big deal for me since I clean it every time.

[@siirparkveben3074]

🤩🤩🤩🤩🤩🤩🤩🤩

[@cuforming]

😍😍😍😍😍😍😍😍

[@isaacramos9]

how to buy the sealant. thanks

[@cuforming]

It's all in the recipe... wait for the give away!!! Thank you!!!

[@compency]

I love trees ♥️

[@cuforming]

Hey, go check my latest video for the giveaway!!!

[@らムBRO]

Sızdırmazlık nedir hangi malzeme acaba?

[@cuforming]

Tarifi burada bulabilirsiniz: beacons.ai/cuforming

[@beatricematalone387]

I love trees

[@cuforming]

Hey, go check my latest video for the giveaway!!!

[@loredanabrianti6243]

"I Love Trees"

[@cuforming]

Sorry, the giveaway was last year. You can buy the recipe from here: beacons.ai/cuforming

[@odreesorcieredelhetre6058]

Love a Tree

[@cuforming]

Too late, sorry. If you wanna buy the recipe though, it's here beacons.ai/cuforming

[@peppiino]

I love tree 🌲

[@cuforming]

Hey, go check my latest video for the giveaway!!!

[@zeus_labo_japan]

Doesn't this solvent corrode and ruin the rubber rings inside the airbrush? You have to be careful what you use, it can destroy your airbrush over time, and if it's not a generic brand airbrush, but a good imported brand airbrush, ordering repair parts can be complicated.

[@cuforming]

This solve evaporates faster than you think. I never had this issue with my air brushes. And if it does, it's just an O-Ring... not something for NASA rockets

[@zeus_labo_japan]

@@cuforming Taking advantage of the opportunity to talk to you, could you tell me in more detail about the content of your PDF guides? Are the 15Euros Ebook (Electroplatina) and 9Euros (Conductive paint recipe) two packages with different contents? Or does the package (Electroplatina) contain the contents of (conductive paint recipe) included? I'm asking before I end up buying 2 packages with the same contents.

[@cuforming]

@@zeus_labo_japan They are two different items. They contain the recipe and the tutorial for the complete process of how to prepare those recipes.

[@zeus_labo_japan]

@@cuforming OK.

[@cuforming]

@@zeus_labo_japan Thank you! If you need more information, you can reach with me on my social media.

[@luiscontreras1844]

Amo los arbole

[@cuforming]

Gracias, pero ya pasó el tiempo de ganar. Si quieres la fórmula de pintura conductora entra a mi sitio website.beacons.ai/cuforming/tutorials-shop

[@DAGLARINKURDU]

Agaclari seviyorum

[@cuforming]

hediye çekilişi sonlandırıldı. satın almak istersen burada: shop.beacons.ai/cuforming/348be670-0eb4-4792-8854-54986e100666

[@isaacramos9]

i love trees, los arboles son vida, cuidemoslos!!!!

[@cuforming]

Hey, go check my latest video for the giveaway!!!

[@TedWillingham]

Me love tree

[@cuforming]

Hey, go check my latest video for the giveaway!!!

[@maghsoudmaherinia9471]

سلام ممکنه دو حلال گرافیت را نام ببرید ممنون می شم

[@cuforming]

شما باید دستور غذا را از اینجا بخرید: beacons.ai/cuforming

[@XCernobylZ]

Carbon dust + all type paint + lacquier = finish that simple why must buy recipe 😂

[@cuforming]

Because carbon dust is not as conductive as graphite and lacquer and paint will isolate the current!!!!

[@nematkhalil6205]

Love a Tree

[@cuforming]

Sorry, the giveaway was last year. You can buy the recipe from here: beacons.ai/cuforming

[@fernandoloera8861]

i love tree

[@cuforming]

Give away was on May 16th. Sorry. But thank you for your effort!!!

[@laceymiller5853]

I love trees

[@cuforming]

This giveaway ended long ago. There is another reward on another video. Check this one out and leave a comment there : kzbin.info/www/bejne/Y3akl3qPgb15jpY

[@tcasey1931]

I love trees

[@cuforming]

Sorry, the giveaway ended long ago! You can still buy the recipe from here: beacons.ai/cuforming

[@jackevante]

I love trees

[@cuforming]

Sorry, too late. You can find the recipe here: beacons.ai/cuforming

[@mandymcclure717]

I love trees

[@cuforming]

Too late for the giveaway. Sorry!

[@hsavidge]

I love trees

[@cuforming]

Sorry, too late. You can find the recipe here: beacons.ai/cuforming