Grasshopper tutorial - Voronoi Bike Seat

[@SebAnt]

Thank you. 🙏🏽Your tutorial is really clear for a complicated subject.

[@pippocreations]

Glad it was helpful!

[@carlfogarthy6508]

fantastic! thank you

[@LurLemurllcorp]

Finally i found what i need! Thanks!

[@pippocreations]

I'm glad to hear that!😊

[@LurLemurllcorp]

@@pippocreations I have som problems with creating this war to make voronoi have you any sosials for contact? I tried to download wb plagin for grasshopper but i cant't unstal it

[@pippocreations]

@@LurLemurllcorp send me a private message on instagram @pippocreations

[@LurLemurllcorp]

@@pippocreations I wrote you as @toghrulsardarli

[@joshuagraham50]

I started from a brep not a surface and now can’t get past this point ? 10:25 any help would be great I’m new to grasshopper

[@pippocreations]

Hello! Maybe you should try to decompose it and use th surface of you interest. Would that work out?

[@kiandokhtmaghsoud2589]

Thanks alot. that was simple and very helpfull. I followed everything that you did one by one but I dont have the same outcome. should I trun off the preview for all of them execpt the last icone? should I bake anything?

[@pippocreations]

Hello! Thanks a lot for your feedback and for reaching out. Yes, you probably have to turn the previews off and leave only the last one on. Let me know if this helps!

[@sugrovids]

Great tutorial, thank you

[@pippocreations]

Glad it was helpful!

[@malakelzeftawy818]

Hello i am following your tutorial , it is making it easier but with evry trial I seem to get at the step of the polyline ( a message saying insufficient points for a polyline) which make me stop and can't seem to continue without fixing it. Any ideas how I can fix this step please ? I am implementing it to a shoe midsole surface.

[@rrollin]

Dear Filippo Ruggiero, from minute 10:45 onwards, when you start the procedure to extract the larger surface, things start to go wrong for me and I don't get the same result. When I turn off the preview of all previous instances and leave only the "List item" activated, only one of the voronoi polygons is displayed. The object I'm using is a vase. Could you help me, please?

[@pippocreations]

Hello! This is because the first item on your list is that polygon. What you have to do is "Sort list": Get an "area" component and find out the area of each surface. The area output connect it to "k" on a "Sort list" component. Connect the surface split output to the "A" of sort list component. Reverse the A output of sort list. Connect it to a list item component. Contact me through instagram and I can send you a screenshot :)

[@rrollin]

@@pippocreations Thank you very much for your response in such a short time. I will contact you on Instagram.

[@karimaannalloush2770]

Thank you for this great tutorial! I did the same thing for a shoe insole, it is a mesh and I added it as geometry. I closed the polylines, filleted and lofted it with the scaled part because I don't have a surface and couldn't use the surface split. But the edges of the mesh are not smooth nor closed. Can you please help me fix it?

[@pippocreations]

Hello! You might hav to re-mesh, or work on the mesh itself. Another option could be adding the thickness in Rhino instead

[@SebastianRotzinger]

Hi Filippo, i have a problem when i apply the voronoi3D to the surface inside of a bounding box bigger than the surface. it seems not to see or recognize the edges of the surface so i have open cells next to the edge. thanks in advance, i really like the video and so far i really understand the working of each component.

[@pippocreations]

Hello! Please contact me through instagram @pippocreations with some screenshots and we will see what we can do :)

[@BatuhanDuran-n6h]

Hello, thank you for your informative content. I am working on the same command, but the offset curves on the part are not equal and come out in different sizes. However, I want them to have an equal thickness. What should I do to achieve this?

[@pippocreations]

Hello! Can you please contact me through Instagram (@pippocreations) with a screenshot to understand what you mean :)? Thank you

[@MaryMary_nu]

Is there a way I can do a gradient for the pattern or is it always randomize?

[@pippocreations]

@@MaryMary_nu hello! You mean like this? kzbin.info/www/bejne/iGSkoJuvirKIoposi=u0S4kSh9DBgsKfiq

[@MaryMary_nu]

@ Yes! But how would I apply it with a voronoi pattern on a multi curved surface

[@pippocreations]

@@MaryMary_nu Maybe this one helps ? kzbin.info/www/bejne/iJTUfp6iZ5qYgsk

[@MaryMary_nu]

@@pippocreations thank you!

[@MaryMary_nu]

Hi I having a problem after the surface split

[@pippocreations]

Hi! Send me a DM on Instagram with a screenshot and I will have a look

[@arinnj6562]

Perfect ❤🎉

[@pippocreations]

Thanks a lot! I really appreciate it! ❤

[@joshjen1129]

I had an issue with my brep brep. It went red when I attached my geometry, as a result I couldn’t see where they intersect

[@pippocreations]

Hello! Please send me a DM with a screenshot on Instagram and I will try to find the issue 😊

[@masomemirkamal8838]

Could you please introduce the plugin which used at the end

[@pippocreations]

Hello! It is called weaverbird. You can find it by typing admin package on Rhina and install it

[@alonsoandresdaiepinilla6608]

hi, i dont have the WB how can I make it? I just need that to finish

[@pippocreations]

Hello! Try typing "package admin" on Rhino and find it there. Let me know if it works

[@RGCAD]

Nice