Graupner Hott Receiver S1019 telemetry setup with voltage sensor 33631

[@Yngve_Dalen]

Great video, thanks 😀

[@billhallier5526]

Very helpful. Do you have any other videos on how to get a Falcon 12 working with an MX32?

[@HoundDogMech]

@ 1:34 you hit SETTINGS & DATA VIEW to advance to the screen where you can turn on the TELEMITARY for Channel 9. In my case with the GR-12L Rec. it's Channel 5. Anyway when I hit the Double arrow next to SETTINGS & DATA VIEW it beeps and nothing happens UNLESS I have the Receiver on and Bound. This was already set to YES, Does that make a difference?

[@GaryQuiring]

All these menus from Settings and Data view are coming from the receiver so it has to be on and bound. These settings are stored in the RX, not the TX. If it was already set to YES than Ch 5 is setup for telemetry, not a servo.

[@fulviomichelutti5669]

Gary thanks for your help, now is more clear for me and i understood that for not critical model (for example acrobatic) i can use the GR12. Thanks. Gary sorry one more question, i looking for remarks on the programming of my Graupner MC16 HoTT because the original translation from german language to italian done by graupner i understood is not perfect and when i set up my models for different functions is difficult to get results. In this case due to the fact that i do not know germa language i serch for remarks that some body done in order to semplify the radio set up. Thanks

[@0420dans]

Hi,after setting data view button I got different screen picture -never receiver, where is possible to set on or off channel as telemetry output.I have MZ 24.PRO Any idea??

[@GaryQuiring]

The video was for the exact same transmitter that you have. The RX has to be bound and working to set the telemetry output.

[@fulviomichelutti5669]

Good Morning, my name id Fulvio and i write you just to make a question related to GR12 and GR 16 Graupner. Which is the different between the 2 RX? I understood the 6 and 8 channels, the telemetry, but in terms to use in a regular way with simple models to use at fly models club with simple model what is the different between the 2 models? one has range 2000 Mt and the other 4000 mt but normally i fly around 300 or 400 mt in this case what is the best to use? Thanks

[@GaryQuiring]

The GR12 has a single antenna, the GR16 has two antenna's for better diversity. It's only using a single antenna but it can decide which antenna has a stronger signal.

[@billhallier5526]

Specifically, my Falcon 12 receiver binds and functions properly, but I cannot get the gyro to initiate. Any thoughts?

[@GaryQuiring]

You have to perform the gyro setup in the settings and data view. The gyro won't activate until that is completed.

[@HoundDogMech]

How many Graupner mz-24PRO HoTT Radio Videos have you made and where the HIDING? A URL to them would be greatly appreciated. If your still in the Business. You just never Know with Videos here on U-TUBBY, The Dummies' have removed many upload dates.