This is an education channel for all Engineers who enthusiast with 3D CAD, CAE, and CAM. Thank you for your kindly appreciation and please Subscribe.
Пікірлер: 52
@felipekleinfiorentin68505 жыл бұрын
First of all, great video/tutorial. Is there a place where I can get the mesh and geometry files? Thank you
@alejandrosolis36074 жыл бұрын
Excellent video my friend, although I have some doubts. Could you upload more videos about this great software please? We all are going to be very greatfuly with you.
@sangameswaran92415 жыл бұрын
Need more tutorials
@azamnawaz64714 жыл бұрын
please upload a link to download the geometry file used in the video
@sermanrajaduraim16635 жыл бұрын
which software used.? sir
@banyubiru28802 жыл бұрын
how you define each size in element size part? did you have literatures for that?
@CADCAECAMTutorial2 жыл бұрын
Based on experience and visual inspection to see how distorted after meshing compared with original cad shape. Larger size of element size, then more distorted. Remesh with smaller size. Then go to mesh element quality check to ensure convergence during calculation.
@banyubiru28802 жыл бұрын
@@CADCAECAMTutorial thanks for answering my question, if you don't mind, would yuo give sample video for that.
@original68284 жыл бұрын
Sir how to fix if my software cannot executing VisualCAST. In the Procast just say " Please run Procast for at least one step before executing VisualCAST". I was confused about what that meant, even though the software was running.
@CADCAECAMTutorial4 жыл бұрын
Sorry cannot help you. I no longer work using that software.
@marcuz90762 жыл бұрын
Sir, can you help me with Hpdc process. I didn t find any tutorial 😭
@ahmedesmael5310 Жыл бұрын
Can you please give me the user guide manual for the software (version 2018 or higher )?
@nkihil17 ай бұрын
Ye konsa software h. Iska crack hoga apke pASS
@nkihil15 ай бұрын
Does any one have this software. Where I can download this
@kkgamer64764 жыл бұрын
sir, how to remove *solid element do not exist* error
@dharmaviji92714 жыл бұрын
Please share software download link
@stormboundnoob82753 жыл бұрын
Do you have it now?
@trucphan83753 жыл бұрын
Please share geometry
@designingchouhan82254 жыл бұрын
help me sir for procast simulation . animation simulation part are not filled properly .... animation step update again and again and filled 30% but after 30% not filling part working
@CADCAECAMTutorial4 жыл бұрын
Sorry, I canot help you. I no longer work using that software.
@raghunathshrungare82154 жыл бұрын
Where can I get software pls guide
@stormboundnoob82753 жыл бұрын
Hi, do you have it now?
@raghunathshrungare82153 жыл бұрын
Yes
@affanahmedkhan73623 жыл бұрын
@@raghunathshrungare8215 can you guide me about the issue tha whenever i run it says BATCH FILE ERROR
@eh_mamas80383 жыл бұрын
I come from Indonesia, from Muhammadiyah Riau university. I am interested in casting, I am taking a final assignment in college, horizontal centrifugal casting. Can you help me with a horizontal casting centrifugal tutorial? please help me
@CADCAECAMTutorial3 жыл бұрын
Hi. Greetings to you and everone in Indonesia. For your request, a horizontal centrifugal casting, so far I using Procast I never work on this case. Procast support gravity casting, low pressure die casting, high pressure die casting, and investment casting. I guess horizontal centrifugal casting is not one of the capability.
@eh_mamas80383 жыл бұрын
@@CADCAECAMTutorial so proCAST can't be used for horizontal centrifugal casting mr?
@CADCAECAMTutorial3 жыл бұрын
I believe so. Horizontal centrifugal casting is a unique casting method in industry. Not many application there, not many manufacturer use it. Therefore software developer seen it as very niche market. Not a promising market to develop the software. Many well-known casting simulation software are not supporting for this process. You may consider other special purpose casting simulation software for this case, if available. Or if not available, then you need to use general simulation software with some modification and very difficult detail setting. A general simulation software that fully support both thermal and fluid flow. Also suppory solidification (from fluid to solid) and phase change.
@nihalattar87494 жыл бұрын
Please give Solver path location
@norarahmani27734 жыл бұрын
after doing every steps when i am clicking on start simulation it shows a massage "unable to open formatted in put file piece.dat" also when i am clicking on monitor it shows me " C:\programme files (×86)\ESI Group\Procast\2016.0\dat\startpro\piece.stat is not available can anyone help me soving this problem
@stormboundnoob82753 жыл бұрын
Hi, do you know how can I download the software?
@LightingZman3 жыл бұрын
Can I skype with you to learn more?
@nkihil15 ай бұрын
Bhai downlaod link hi de de
@betinhocr5 жыл бұрын
Help?
@faman926 жыл бұрын
Why it is 95% filled?
@sudharsanpandi28284 жыл бұрын
Sir i have watched some videos none of them have 100% fill, do you know what is the reason
@abhiup114 жыл бұрын
Contraction
@faman924 жыл бұрын
@@abhiup11 other softwares fill 100 percent
@abhiup114 жыл бұрын
It can be filled completely but the user has chosen to fill it for 0.95 fill fraction.
@voumikkumar77712 жыл бұрын
Anyone please help me
@betinhocr5 жыл бұрын
Help
@CADCAECAMTutorial5 жыл бұрын
Hi. What can I help you ?
@betinhocr5 жыл бұрын
@@CADCAECAMTutorial how to simulate only the part ?
@CADCAECAMTutorial5 жыл бұрын
@@betinhocr You cannot simulate only the part, since casting process are related between its components. Impossible produce a casting part without mold base, riser, runner system,etc. Each components contribute to the final casting product, and heat transfer happened between components.
@betinhocr5 жыл бұрын
@@CADCAECAMTutorial but I want to analyze only the thermal module
@banyubiru41395 жыл бұрын
@@CADCAECAMTutorial how to determine the number of element size for each gruop on surface mesh?