Great Planes Dynaflite Super Decathlon Wing & Fuselage build

[@DiyRcPlane]

Thank you my brother❤❤❤❤❤❤❤

[@bchaveezy]

True master builder!

[@JB6seven1]

Looking good brotha! I always loved the look of the Super Decathlon 🤙

[@BayonasRCWorld]

Thanks 👍Same here

[@krashkingrc9715]

Awesome job great build excellent work

[@BayonasRCWorld]

Thank you and I appreciate you for watching my video. Happy New year to you and your family

[@krashkingrc9715]

@@BayonasRCWorld happy New Year to you and yours

[@droniax]

Hi Bayona, just want to say I really enjoy watching your videos. I've seen some very good tips on weathering and panel lines. I wish you all the best with this current build and I'm looking forward to all your upcoming videos. Greetings from James in Holland, Europe!

[@BayonasRCWorld]

Awesome, thank you!

[@edwardcase]

nice cowl detail louvers

[@BayonasRCWorld]

Thank you

[@deandadamo7796]

Great attention to detail! Thanks for the video as I have one in the box waiting to be built. They are out there I still see them pop up on eBay all the time ! Indefinitely enjoy the video as I got some great pointers from you, can’t wait to see the maiden ! Thanks again

[@BayonasRCWorld]

Thank your for your comment and for watching the videos

[@RCForces]

Hi Bayona, just want to say I really enjoy watching your videos. You seem like a really nice guy, who clearly documents all his RC adventures and builds. All the best with this current build of the Decathlon, will turn out to be another stunner in your hangar, I'm sure! Looking forward to all your upcoming videos, keep up the good work. Greetings from James in Holland, Europe!

[@BayonasRCWorld]

Thank you so much 🙂

[@helischorsch9786]

Great work👍…very good hints for beginners to keep an eye on the exact geometry while glueing in the stabilizer and wings. I remember 40 y ago my first Zlin 50 was not symmetrical and wasn’t good to fly then😢 cheers from Munich, Sven🍺

[@Didi-dd7xt]

Hi, I really learned a lot from your video. I have a question how do you cut the door opening ?

[@BayonasRCWorld]

I used a sharp number 11 blade and straight edge metal ruler. Little by little tracing around the door lines I drew with the blade until you completely cut through.

[@sorenwolff4954]

Man, I’ve been looking for that kit for ages. Where did you track it down. Build looks great! Happy Holidays and a good new year.

[@BayonasRCWorld]

Purchased it from a friend. I was looking for one as well. Built one back in 2009.

[@sorenwolff4954]

@@BayonasRCWorld Let me know if you see one for sale. there are some available in the middle east, but don't ship to USA. looking forward to the covering. What are you going with?

[@wheilyfreitas9611]

Você tem que fazer uma Live...

[@BayonasRCWorld]

One day I will.

[@sorenwolff4954]

Finally found this kit! Reviewing your video, it looks like a really straightforward build. Do you happen to remember finish weight with out motor?

[@BayonasRCWorld]

Dry weight before CG 16.8Lbs Total nose weight added to balance at CG 3-3/8" from leading edge 1.4Lbs Total overall dry weight 18.2Lbs I don't think I weighed the model without the engine. I have to verify.

[@sorenwolff4954]

@Bayona's RC World outstanding, Thank you for info!

[@richardvandale2565]

In joying the video wondering when you fiberglass do u use 3/4oz

[@BayonasRCWorld]

Yes I have been using 3/4oz fiberglass cloth.

[@littsrc1726]

I was just wondering where I could get a kit like this one Thank you 👍👍

[@BayonasRCWorld]

Just ask around in a few of the RC Airplane build groups. Somebody who has a untouched kit that is willing to sell will respond

[@jbroughton8742]

I just purchased this kit off eBay. Really enjoyed watching your video’s. What is the building board that you’re using?

[@BayonasRCWorld]

My building table consist of a solid wood counter top from home depot straight and true then a sheet of water resistant dry wall also known as Gypsum board. The reason for the Gypsum board is mainly for the ease of pinning down parts with T-pins. I hope this helps. Also I cover my plans with cling wrap and it really is easier than wax paper. I have used wax paper for over 30 years building and I must say using cling wrap for the past 12 years I will never go back to wax paper.

[@jbroughton8742]

@@BayonasRCWorld What size servos would you recommend? Thanks again for all the videos and help.

[@BayonasRCWorld]

@@jbroughton8742 Hitec HS-5585MH Coreless Metal Gear High Torque Digital Servo (High Voltage)

[@BayonasRCWorld]

@@jbroughton8742 Specifications: Speed: 6.0V: 0.17 sec/60 deg. 7.4V: 0.14 sec/60 deg. Torque: 6.0V: 194 oz/in 7.4V: 236 oz/in Length: 1.57in (39.8mm) Width: 0.78in (19.8mm) Height: 1.49in (37.8mm) Weight: 2.12oz (60g)

[@wheilyfreitas9611]

My nome is wheily...Good night, friend... I'm a fan of your channel... I've watched more than 20x each video of you assembling the cessna 182 skylane... I have a kit inspired by your channel... I would like to ask for help I can't find it nowhere the cockpit kit... could you give me a tip?

[@BayonasRCWorld]

Wow, thank you for watching and glad my channel inspired you to get your build going. As far as cockpit kit for the Cessna 182 you can check planesgoneby.com/products/ They have the interior kit available

[@wheilyfreitas9611]

Thank you... friend... parabéns pelo canal... inspira muito...

[@wheilyfreitas9611]

sorry for so many questions... just one last one... which site purchased the cessna 182 navigation lights?

[@BayonasRCWorld]

@@wheilyfreitas9611 I ordered the lights from a company in Vietnam if not mistaken. However they have other lights that are better out on the market. Give this link a try. Different variations to choose from. www.davesrce.com/navigation-lights

[@wheilyfreitas9611]

@@BayonasRCWorld thanks

[@billjones3071]

Too bad they don’t make these great kits anymore, they were extremely practical, not overly complex and fly great

[@edwardcase]

is this plane for a gasoline engine? 30 CC?

[@BayonasRCWorld]

Yes I will be using a DLE35RA engine.

[@rudymagallanes9711]

Hey bro are you in Guam I live here to. I have a friend in the Philippines that likes yoru content and has asked me to contact you regarding the way you build RC planes.

[@BayonasRCWorld]

Yes I am on the Island. I am from the village of Barrigada. Also the club president.

[@rudymagallanes9711]

@@BayonasRCWorld my friend in the Philippines would like to speak with you about learning the way you do that wing and also the rest of the plane.

[@maureenrippin]

"Promosm"

[@GanjaGlutton7923]

How’s retired life treating your sergeant this is Stansbury I worked with you at the gym in Fort Polk. Wanna know how you’re doing I’m doing great. Actually, I’m doing more than great because I recently discovered medical marijuana and I can’t live without the shit. I smoke the hell out of it, but it makes me sleep good and my pain go away.

[@BayonasRCWorld]

Whats up Stansbury! Glad all is doing great on your end. Things are doing okay here on my end, my Mom had just passed away back on Dec 24th and I had just laid her to rest on Jan 16th, 2023. Other than that things are doing just fine. I am still working on my VA disabilities and compensations in hopes that I can get 100%. I am currently at 70% disabled at the moment. Well don't be a stranger brother.