This is the sixth episode in a series of similar videos! The other five episodes can be found in the video description under 8"show more" under this video!
@Legotronics5 жыл бұрын
Really enjoy the repairatons... hope you will keep them coming. They are excellent. Well done.
@davidhebrero01475 жыл бұрын
I love your videos, greetings from spain!
@NightMind05 жыл бұрын
How to find a local scrapyard? Any tips?
@allenmay67465 жыл бұрын
Hello from Dayton, Ohio! Staco Energy Products is located 9 miles from were I live and this is the first time I’ve heard of them 🙂 It was nice to hear Dayton, Ohio mentioned in you video 👍
@svenkaiser37695 жыл бұрын
The Post Apocalyptic Inventor Sehr Interessantes Video wie immer. Der Größe Kompressor und der Lüfter mit dem Radiator der auf dem Schrottplatz lag ist ein Kühlaggregat von einem Kühlhaus bzw. Expliziter von einem Tiefkühlhaus.
@denniswhite1665 жыл бұрын
I wish there was a scrapyard like yours near me.
@richard11655 жыл бұрын
There are many junk yards in the States that don't even allow the public to go and purchase scrap (more along the lines of straight recycling centers). You might be lucky to at least have a pick-and-pull yard near you, but they don't charge at scrap value like a scrapyard yard would as they charge by the part type in many cases.
@tomsuica87315 жыл бұрын
@@richard1165 Most recycling centers will allow you to pick through and buy stuff if you are a smooth talker/nice guy just go be nice and ask the big dawg. Duluth, GA Georgia USA.
@dfpguitar5 жыл бұрын
it's funny you both assume Dennis is in the USA. I know it's probable but there are a lot of other countries in the world lol
@1_GigaWaffle5 жыл бұрын
@@dfpguitar Yep) Here in ukraine "scrapyard" means a place for utterly unusable junk. Because often anything that is usable/repairable doesn't get anywhere close to junkyard. When I moved in I had a lot of stuff to clean out. Old bed, sewing machines, whole kitchen, old women's clothes, pots, 60 year old TV, lots of junk. I would just put everything near a dumpster and every time I come out, some of the stuff would be gone. The next morning the dumpster is still full of garbage, but everything I brought out is gone.
@vtbn535 жыл бұрын
We all do, and that is what, unfortunately, makes this video pointless, but that's not to say it's not enjoyable, but there is little to take away from it.
@PeteRondeau5 жыл бұрын
Every time I go to a salvage yard to pull a part off an old car, I always have a moment of melancholy realizing that at one time, at least for a brief moment, every vehicle in the yard was somebody's pride and joy.
@charlestrubl5 жыл бұрын
Pete Rondeau I do the same thing
@moth.monster5 жыл бұрын
And now that part will be a part of yours, so don't feel so bad. Even the cars that get melted down will be made into something new.
@nox_chan5 жыл бұрын
No
@Hellsong895 жыл бұрын
@@moth.monster Melted to make crappy new car that has fraction of the service life compared to car before it and this new car was shipped from around the world to one place and from there to another side to new owner creating more pollution and waste than old car could ever produce.
@troyna774 жыл бұрын
im sure 100 years ago, people did not throw away vehicles. we fixed everything. but companies make products you cant fix readily anymore. why ? cheap plastic cases. AND the lawsuits. class action Lawyers are one of the only one of four professions really thriving in our society. the others are corrupt politicians, lobbyist and mega-corps.
@phildxyz5 жыл бұрын
4:36 Hogshead per fortnight - that's my new measurement standard! lol
@helpwithsolutions36105 жыл бұрын
i am still falling about
@WeighedWilson5 жыл бұрын
Bushels per parsec comes in at a distant second.
@timeflysintheshop5 жыл бұрын
I wondered if anyone else picked up on that. It showed that when he said "cubic feet per minute". Being from metric land, was he making fun of our units? Also from Ohio BTW. 😀
@boredfartless42215 жыл бұрын
@@timeflysintheshop Yeah of course he was taking the Michael out of imperial
@tomvarley43445 жыл бұрын
en.wikipedia.org/wiki/FFF_system
@unshanks5 жыл бұрын
From Ohio, love the repair-a-thons.
@jabuticaba20005 жыл бұрын
🇩🇪🇧🇷🇺🇸✌🏼
@H.B.Fightclub4 жыл бұрын
Ohio here 🕯️
@Official_King_Penguin4 жыл бұрын
Another Ohioan here!
@John-19844 жыл бұрын
Lancaster, Ohio here.
@jeffflowers91634 жыл бұрын
Columbus 614
@briancornell4825 жыл бұрын
Your videos are helping inspire me and my son to think about how to repurpose and restore 'lost' and discarded objects. Thank you for your work here!
@antraciet5 жыл бұрын
You should do Brian, and make vids from all the repairs. Those channels are very hot nowadays, i like to watch them. Looking forward to see your first restore.
@ForgivenBob5 жыл бұрын
I'm from Hinckley Ohio.. We are famous for Buzzards (Turkey Vultures) returning to our town every year, on the same date.. I sure do appreciate your videos, and your philosophy of repairing and reusing what we already have.
@circlefx5 жыл бұрын
This is my favorite type of episode of yours. - I thought you were going to dig into that car at the start, now that would truly be post-apocalyptic! Thanks for the vids!
@stratoman55045 жыл бұрын
I'm in northern Indiana, about 4 hours from Dayton. I attended college at the University of Dayton from 1965-1969. I have a son who still lives there. I always liked the town, and go back periodically to visit my son.
@kwayy97875 жыл бұрын
The propane torch marking says "Universal hand torch"
@MarcinKrukar5 жыл бұрын
In Polish language.
@mrfrog85025 жыл бұрын
Universal hand blow torch
@hhhobby5 жыл бұрын
I suspect it is used for soldering. The pistol looks incomplete. Gas valve knob and several parts missing.
@tkankatw0rcza5 жыл бұрын
Yes and it's used with soft solder. It's about 80 EUR new
@hhhobby5 жыл бұрын
Ebonite handle, B quality mark, red propane-butane tank ... This is from the 80s
@DavidBeukes5 жыл бұрын
South Africa here. Also enjoy your repair-a-thons. What I've found interesting is that my kids will often watch these with me, and get as sucked in as I do. I like that they are absorbing the concept of "repair culture" from a young age.
@shamrock19615 жыл бұрын
I can't get enough of your scrape yard finds. Learn a lot from your philosophy on fixing things and restoring them versus scrapping them out. Keep up the good work and thanks for all the inspiration. Old geezers like me still like to tinker with things so the more I watch you the more I want to keep repairing and restoring!!!
@andyphillips4515 жыл бұрын
I'm sorry to say that I've only just discovered your channel, but I think it's fantastic. I completely share your ethos on repairing and resurrecting old equipment. You have a very enthusiastic new viewer. My Dad will love it too. Thanks.
@akronmakerspacetreasurer31505 жыл бұрын
So, here is your comment from Ohio, USA. I very much enjoy your videos. As my domain name says, I work at a Makerspace in Akron Ohio. I am in Northeast Ohio close to Cleveland. Akron is called the Rubber City due to being the original home of Goodyear, Firestone and B. F. Goodrich tire companies. In fact, our Makerspace is in the old B. F. Goorich tire plant. I find your videos very inspiring as we also tend to recycle old tools and equipment in order to obtain machinery that we could not afford new. We refer to this as obtaining machines that are "lovingly Pre-Broken". WE learn a lot by repairing them and putting them back into a useful condition. Keep up the good work!!! We love it.
@H4zuZazu5 жыл бұрын
That drill probaby came from UK, since they have to use a Isolation Transformer that outputs 110-115V on Construction-Sites.
@wilburt61315 жыл бұрын
Yes. It's a centre tapped 115v transformer so that any live to earth shock will be only 55v ac
@grantrennie5 жыл бұрын
They sold those hammer drills here in the UK around 1999 to 2003 for about £100, Chinese made branded bosch, I think at around the time they moved production from germany to china and the factories generally added chinese text in addition to market country text. The lead will have been changed on a construction site or by a hire shop after being damaged and the 110v commando yellow plug would have been removed to use on something else such as a site light or another tool and then just not replaced and the drill got set aside. For a while many different drills on the market were notorious for not having a safety clutch mechanism inside and so they would get stuck drilling concrete when a bit of metal rebar/re-enforcement bar was hit and spin violently causing wrist injuries drilling walls or floors and additionally if drilling above head height could cause a fall from a ladder, a facial injury or the drill could fall. Electricians used to use these to drill concrete floors for fitting industrial power cabinets and cable ladder and tray runs between walls and plant/electrical equipment and would wedge the drill between their lower legs so that if they jammed they could let go of the trigger button and it would be less likely to spin violently.. Trainee/apprentice electricians usually got the drilling tasks.. After makita made a big move into the market around 2005 many people bought those as they had safety clutches that would just make a ratcheting noise if jammed instead of the drill rotating round the jammed drill bit. Looks like nobody was too fussed to use the drill and it was cast aside years ago..
@moodophile5 жыл бұрын
Yep, and the early to mid-90s saw lots of UK builders in Germany, there seemed to be quite a shortage at the time. I'm surprised one would have bothered bringing over 110v gear and the necessary 'site' transformer, but I suppose you have use what you got... As Grant Rennie explains below, these UK tools feature yellow 'Commando' or 'Cee form' plugs, which are almost never seen outside the UK, the more familiar ones being the blue (230v) and red (400v).
@zoidberg4445 жыл бұрын
That was what i was thinking. 110V tools are pretty common over here. You can get a used 110V transformer for as little as £30 with a bit of luck.
@Basement-Science5 жыл бұрын
Those 110V site transformers exist in germany as well. I don´t know in which cases they are mandatory though. Normally the tools come with a special type of CEE plug on them that only fits into one of these transformers.
@leslieaustin1515 жыл бұрын
Please, carry on with this series. I may never do anything quite as involved as you do, but it helps the flow of ideas (and ideals) and encourages me to keep trying. Thank you! Les in UK
@ricks59843 жыл бұрын
Viewer from Dayton, Ohio here. Dayton is no longer the manufacturing city is has always been in the past and I've lived through 72 years of its decline. Wish I had your brain to do what you do!! Outstanding!!
@gibek26005 жыл бұрын
This propane torch is polish and the text says Universal hand torch
@sumilidero5 жыл бұрын
exactly
@Miko92ster5 жыл бұрын
the brand is "PERUN" i believe. An old one for that matter.
@aaron715 жыл бұрын
and i'm thinking it's the yard's tool, not something recycled by how it was set!
@lukasjuszczak16645 жыл бұрын
@@Miko92ster >Perun Oh, I see what they did there. But. Wrong element, methinks.
@jerrylindstrom33235 жыл бұрын
I mean it was kinda easy to guess
@ianbutler19835 жыл бұрын
I am so impressed by how precisely you speak English, your second language. Your usage is perfect, much better than many Americans and Brits.
@riskyb2504 жыл бұрын
Writing from Texas. Really enjoy watching your videos and I share your philosophy of fixing old machines/devices. Please keep making these!
@leepo21424 жыл бұрын
I really like your scrap yard refurbishment series. Always illuminating.
@wiretamer57105 жыл бұрын
Love your use of the smallest reused components. Many people think its a waste of time to scrounge fasteners. But I find there are many opportunities to sort small parts during a working day. It's a great way to clear your head, or cool off after a big day wen your head is just over stimulated.
@knottreel5 жыл бұрын
Whenever I'd watch the home renovation shows on TV, the contractors would always scrap perfectly good wood. It was explained that it was far more cost effective to use new lumber. I can see this changing only when wood becomes scarcer and time is less of a commodity. Old world craftsmen seemed consider their time like this.
@50842045 жыл бұрын
Following the spirit of your channel, yesterday - before dumping my 10 years old microwave (faulty encoder - spin and press type), I decided to salvage a few parts. Transformer (remove HV coil replace with thick cable --> spot welder), cable (good quality), two induction motors (with fan blades), DC filtration module (not sure why I need it), 6RPM 230V motor (not sure yet why I need it ;) It was a simple and very refreshing activity.
@StanleyKubick15 жыл бұрын
build a small induction heater. plenty of tutorials available :)
@sustainable78655 жыл бұрын
Great intro and I love these scrapyard episodes. The green funny looking machine in the foreground @2:44 is a circular shears to cut round objects from thin sheet metal. Often used to make blanks for forming (spinning) lamps, pans, pots etc.
@gutsngorrrr5 жыл бұрын
I totally agree with everything you say in your intro. It's so sad to see such waste and I love repairing old equipment and in many cases the older equipment is so much better.
@Sammenluola4 жыл бұрын
In my mind "Scrapyard Repair-A-Thons" are some of the best content on KZbin. I myself am a "primitive technologist", but your fine example has made me consider discarded 19th - 21st tech stronger than before!
@KennethNicholson19725 жыл бұрын
Brilliant video. Very interesting to see your ingenuity make new items from old waste. Brilliant.
@DragonBuilds5 жыл бұрын
I salvage a lot of brass pipe fittings from the scrapyard. I clean them and they're good as new.
@gilbertsprojects29545 жыл бұрын
The sides of the case are “corrected”.. 😂🤣 brilliant. Love your repair videos dude, keep em coming! 👍🏼
@DUDE723415 жыл бұрын
glad you took all that junk home..I used to be like this..but felt overwhelmed by my things that always needed my attention and time!
@martinambrosecchia29914 жыл бұрын
I really like the fact that you emphasize German made products but at the same time you don't bash american products. Much respect. Your talents are much appreciated.
@chetleonard1695 жыл бұрын
I enjoy scrap and salvage yards myself. They present so many repair adventures. I too can't ignore the wasted energy and resources and feel driven to respect them.
@TheJiminiflix5 жыл бұрын
I was given by a friend the same bosch hammer drill 25 years ago and I still have it and it works great. I call it Captain, does the hard work.
@sethlavinder3 жыл бұрын
Viewer from WV , not quite Ohio but as a ham radio op I have made MANY trips to Dayton OH for the Hamvention, USA’s biggest Hamfest. Praying it still exists after CORONA is done screwing everything up! I like this step down isolation transformer project. Fairly certain I have that variac in my junk box , but need the 120/120 isolation transformer itself. You have some amazing scrap yard! I am not sure of any near me but it sure looks like great fun scavenging for materials. Lord knows new materials of about any kind are ridiculous expensive! I was an IT guy many years and now regret not taking more time to salvage good stuff from the hundreds of dead printers and scanners I’ve had to dispose of through proper channels. So how’s a guy become so well informed on what and how to find the gear you collect and the amazing diagnostics you are so capable of? Very much enjoy your channel and innovative work
@SeanBZA5 жыл бұрын
Got that exact same drill, just the 230VAC variant. It is very capable, and is light, so you will find that you use it for all work that needs concrete drilling, as it drills the holes so fast. Best is to use the matching Bosch SDS bits as well, they are much better than the clones, and last a long time as well. I also used a old 8mm SDS bit ( it had a good life, but the electrician finally killed it after 12km of lighting installation) and put a thread on the broken end, and put a keyless chuck on there, so that I could use the drill, in non hammer mode, to do things like put in screws and use regular non SDS bits. Very useful, and the chuck was free, from a dead cheapie drill I picked up in a lot, and lucky for me I had the right ( old, imperial specification) die nut to cut the thread it needed, or at least the die nut was close enough to not matter.
@tfknauss4 жыл бұрын
Yup, new viewer and from NW Ohio. Use to live in Dayton. I was stationed twice in Germany while in Army. Miss Germany,, really enjoyed my time there. Thanks for sharing!
@michaelguzzi15 жыл бұрын
3:50 whats up with those beers just sitting there? lol
@iteerrex81665 жыл бұрын
Yup saw that too. I was gona make a comment about it. lol
@christiangeiselmann5 жыл бұрын
It is a scrap beer place as well.
@michaelguzzi15 жыл бұрын
@@christiangeiselmann That is a bit sad really.
@simonhopkins38675 жыл бұрын
Just chilling out next to the air-conditioning! ;)
@michaelburns80735 жыл бұрын
Ah, it's Beck's beer. That explains why they have been scrapped. :-) Just kidding! I don't even drink the stuff.....
@stevekreitler93495 жыл бұрын
I especially enjoyed your re-purposing of the second blower motor and enclosure! I'm primarily a woodworker, and I work in almost 100% found wood (found in cabinet shop dumpsters mostly, so it's pretty easy to work!).
@shaileshshukla36105 жыл бұрын
Salvaging parts from scrap is really a good idea and it motivates me to do so for my projects. Environment and money both are saved...! Like your work.. love from INDIA🇮🇳🇮🇳🇮🇳
@l3p35 жыл бұрын
Is it harder to get such scrap in india? I would think there are more people trying to get such items before others do.
@shaileshshukla36105 жыл бұрын
@@l3p3 not really.. you can get these easily but definitely not in that much good condition.
@beakittelscherz54192 жыл бұрын
Must be really exiting & fun to be a machinery pro Iike this guy with a uni degree to recognize all the stuff he is seeing on a scrap yard! That's the reason why this channel is so important. He really knows what he is talking about, and the educational benefits for us to get it free is awesome! He deserves more Subscribers to make some cash though. To provide this kind of show and tell! Even if he himself doesn't seem to think though.. So everybody: Share this channel with your friends!
@VENUEATHENS5 жыл бұрын
Yes Please more Scrap yard Exploration, builds, and finds..
@hectorenriquesantandermeza52085 жыл бұрын
Man, these scrapyard finds are my favorites from your channel. Keep on doing this restoration processes. Greetings from Ecuador.
@misfittoytower5 жыл бұрын
I love your scrapyard videos. I really wish there was a scrapyard anything like that here! Please make more of these videos!
@SamM-sw3le5 жыл бұрын
About the Wagner, that thing is basically a vacuum cleaner in reverse and in your paint test of it you either used a spray gun that requires a higher pressure to use or you didn't thin the paint down enough. If you ever find something like a easy sprayer/little beaver paint gun (quite easy to tell, its all plastic with a very large inlet port) you can just use a reversible vacuum cleaner with it just fine. The only trick with these things is whatever you a using with them needs to be quite thin, almost water like in consistency And I also had a thought about the step-down transformer: could you make a 240-110v step down transformer using 3 microwave oven transformers? I have a feeling that it is possible
@mrfxm552 жыл бұрын
Francisco Greetings from Florida USA if I had your skill set I'd never leave the workshop.. lol always a good time watching your channel one of my faves on KZbin.🎉🇺🇲😎
@EsotericArctos4 жыл бұрын
This is the type of content I enjoy watching. Kind of like a "scrapyard challenge" of sorts. We need more people recycling things if we want to survive long term. Really great to see you encouraging this and showing what can be done with a little imagination and a few things that others had thrown away.
@mikeoliver32545 жыл бұрын
That machine you showed that you thought was some kind of bender is a circle cutter. You can get dies for it to use it for making beads on round sheet metal too, but it is primarily for cutting sheet metal circles.
@morbid6six65 жыл бұрын
Not only do I enjoy tools, and general repair of most things. I also enjoy the hearing the German word for things. I would love to learn the language.
@TWX11385 жыл бұрын
Your opening comments on repairing and essentially prolonging the useful life actually contribute to my desire to see a faster switch to the production of electric cars in lieu of petroleum-powered cars. I want to see machines, expensive to manufacture, used to their lifespans, not junked-out in a few years, if they are not ridiculously expensive to repair. There may well come a time when a given machine is not worth repairing, but that time should be a long way off. So with that said, that's why I feel it's important to manufacture electric cars as soon as practical, and to build cars with useful range and servce-life, such that people get started driving those cars and maintaining them for the long-term as soon as practical.
@diab0liK5 жыл бұрын
I was born in Dayton, Ohio, but fortunately escaped there many years ago :D I agree with the other comments though, these are the most interesting of your videos!
@ryan-uu9lj5 жыл бұрын
I just escaped Dayton this year. So glad to be gone.
@mrdumbfellow9275 жыл бұрын
Is Dayton that bad? I thought it was better off than Cleveland, Toledo, Youngstown?
@tallswede805 жыл бұрын
is dayton shitty?
@kagartoe5 жыл бұрын
Not much happens there but at least its not a police state like akron.
@TheMarcball5 жыл бұрын
Love the junkyard repairs. Thanks for the inspiration and keep on trucking (from France)!
@Equiluxe15 жыл бұрын
The Drill is most likely from the UK.110-115 volt is the safety voltage required on building sites using a transformer that has a grounded center tap so that there is only around 55 volts to earth making a sub lethal voltage in wet conditions. I still have one of those drills I purchased in the early to mid 1990's.
@lloyd47685 жыл бұрын
Oh man I was screaming take those 2 tools with you. I wish I had a place like that to rummage through!!
@barrymayson24925 жыл бұрын
I must add my voice to many it is great to see these videos they motivate people to look beyond the main use of something to other uses. I love seeing old stuff back up and running. I into ham radio and always find things from household stuff to reuse I have built several radios with bits from TV stereo systems or even toasters! Not used a kitchen sink yet but I have just incase! No I really do.
@bawdydog1765 жыл бұрын
Greetings from Ohio! Very much enjoy the scrapyard runs and repair-a-thons, as well as your presentation style.
@FishGun5 жыл бұрын
I really like the way you started this video. There is a growing culture behind recycling cans, plastics, reusing plastic bags, etc. However, people turn a complete blind-eye to throwing away useful items that will take up land fill sites. My dad has this passion for giving old items, which were perhaps thrown away, a second life. Fixing them, re-purposing them, or perhaps removing the useful parts for another project. I am glad I have 'inherited' this passion of his. It pains me to try to throw away still useful items, I would much rather re-purpose it, fix them, etc.
@cyn0_5 жыл бұрын
These are my favrouite videos you make! Please keep making them!
@Brooks34345 жыл бұрын
Greetings from Dayton, Ohio USA! I really enjoy your videos, thanks for what you do!
@MrSuperheterodyne5 жыл бұрын
Brilliant as usual. Re use and repair. I like this mindset a lot.
@thedreampipe4 жыл бұрын
I wish you had a giant warehouse so you could take all the great things you find. Love your videos. Danke.
@twotone30705 жыл бұрын
I'm loving this series. The multiple re-purposing is excellent. BTW, the Backside is what we sit on, simply the Back is sufficient or perhaps the Reverse is sometimes appropriate. I say this like an an expert in the German language. :) Those steel cantilever tool boxes will last you a life time as mine have.
@scotthaddad5632 жыл бұрын
All of these Scrap repair/renew videos are great!
@MFKR6965 жыл бұрын
Your approach to the plumbing of that turbine was bang-on appropriate. When it comes to proprietary fittings, usually my first order of business is to take said fittings and turn them into adapters for industry-standard fittings that can be relied on. As for anything with plastic fittings... cut that shit out and replace it with fittings that are made out of *real* materials that are solidly anchored to the enclosure. It's usually not as hard to do as most people would think. I would only tinker with anything that has plastic fittings if it came from a scrap-yard, mind you. I would never buy anything that hokey.
@omegahelix5 жыл бұрын
Love watching the scrapyard videos. Videos like this have inspired me to fix up or repurpose when possible, rather than buying new.
@garethsnaim81745 жыл бұрын
Man that first scene with the bridge took me straight back to fall out 4.
@MechanicalRhino5 жыл бұрын
I really like your videostyle an the content. I love old tools and try to keep it alive. Unfortunately, I'm not as fit at electronics as you are, I'm more of a mechanic. But through your videos, I was able to learn a few things in electronics. Vielen Dank und mach weiter so 👍👍
@wymershandymanservice99655 жыл бұрын
From Ohio 70 miles North of Dayton. Enjoyed your content.👍
@twotone30705 жыл бұрын
That Google conversion "Hogsheads/Fortnight" understated humour, brilliant.
@projectbass55745 жыл бұрын
Repair-A-Thon is the best series on youtube! Love every single one!
@handyhippie65485 жыл бұрын
i added you to my patreon account. i truly enjoy your vids, and always learn something. i am in my mid 50's and am a semi-retired carpenter/handyman. at this point in my life i can build, repair or destroy pretty much anything. i also repair, rather than replace things when possible. to be honest, most of what i use every day someone else threw away first. some of it i even got paid to haul away. the things i can, i fix and either i use myself, or sell to someone else. i would go back and get that sheet metal brake if i were you. if you can't use it, i'm sure you could sell it to someone who would for a profit. i hate to see such useful, and valuable tools going to scrap. craigslist is an awesome tool i use quite often to find new homes for the things that i repair, but don't use. facebook marketplace is another. good luck, and thanx for the inspiration.
@alonzosanchez85775 жыл бұрын
Great video!! the Scrapyard finds are awesome!!👍👍👍
@incorrect18444 жыл бұрын
So happy to find this channel again.. Love this series,re-subbed as this is what takes me back many years ago when I found your channel. Greetings from 🇸🇰
@davdavid14893 жыл бұрын
7:31 I tough you were saying all keep my ass open! Hahaha
@rogerscottcathey5 жыл бұрын
That forge blower was sturdy. Adaptable. Surprised it didnt go back to shop.
@jeffwilliams20315 жыл бұрын
Great videos. More, please, more. Love the scrapyard repair videos the most.
@AllThingsMech5 жыл бұрын
Grew up in Toledo, OH and spent quite a bit of time down at Wright State University in Dayton. Staco makes really nice equipment!
@laurentthommet83135 жыл бұрын
It's always a pleasure to look your videos. Keep going on .Greetings from France Laurent
@horacerumpole69124 жыл бұрын
The gun you need is an HVLP turbine gun. Amspray was another manufacturer, I have an amspray single-stage turbine set-up from the 1990's, still works great-
@touchthesun24484 жыл бұрын
I love your scrapyard builds. Your philosophy is dead on... we have become a society of consumers, in an increasingly disposable world. Designed obsolescence is the rule rather than the exception. I drive a 1976 BMW 2002. by choice...it is actually growing in value. I know that people will never change. Once you get lazy, you never recover, that's why I find such value in your videos. Too bad young people are so entitled here in the US...they could never "GET IT"
@rustyaxelrod5 жыл бұрын
I was born very near Dayton (Greenville). Good video! I like your attitude about repurposing things and your skills at making them work.
@rafal53894 жыл бұрын
3:10 "uniwersalny palnik ręczny" means universal hand blowtorch. haha "I better get going". Greetings from Poland! Great channel!
@mog-gyveroneill25005 жыл бұрын
We used to live in Gatow, and my Dad still has several of those tool boxes, and in that colour!!
@jbuckley25465 жыл бұрын
Everyone's dad had those toolboxes.
@Nugetto5 жыл бұрын
@@jbuckley2546 True, mine too. And his father had a wooden one. :P
@manfredschmalbach90235 жыл бұрын
I am the dad with a buncha those ... and proud of the child already rebuilding motorcycle engines outta the blue boxes 😊
@mog-gyveroneill25005 жыл бұрын
@@manfredschmalbach9023 my brother used the tools in these boxes to take apart his motorcycle, but on rebuilding it, found he had a few bits left.. 😁 😁 😁 😁
@mog-gyveroneill25005 жыл бұрын
@Great Guy hahaha!!! Fix up many bikes, and you could make up a whole bonus one with the bits left over!! 😁 😁 😁
@kikcodog4 жыл бұрын
Fun and fitting fact for you is Dayton, OH is the home and location of the Wright Brothers original bicycle shop. The brothers began their experimentation in flight in 1896 at their bicycle shop there.
@Raul_Gajadhar5 жыл бұрын
I really enjoyed the converter build! Very nice build. Hope to see it painted and labeled (Decal) in the future. Thanks for sharing your wonderful Ideas.
@JDLarge4 жыл бұрын
Beautiful boxes, those are quite old school, great score! Unless it’s a “go bag” or tool backpack though, tool boxes are where tools go to die... (Not including in shop cabinets.) Unfortunately if it isn’t opened daily, they’re all but forgotten. That’s exactly why I prefer wall boards for wrenches, magnetic strips for other hand tools and French cleats for cordless and corded power hand tools... Always visible for use AND accountability.
@markwilliammandigers10015 жыл бұрын
Love these repair-a-thons !! I still have one of those blue tool boxes. Don't leave them open on the floor! you will have your shin open in minutes!! And that will bleed as hell! Don't be so harsh on the drill, these hammer drills go threw concrete like butter without pushing. Applying to much force will not help. keep up the good work!
@philtowle4683 Жыл бұрын
My father in law got some 110v tools from work. We used a transformer from beer dispensing equipment to power them from 240v.
@robfel685 жыл бұрын
It's soooo satisfying watching someone do a repair. Not sure why but I hope you continue this trend :). Greeings from Sweden!
@davidhelmuth57075 жыл бұрын
Carry on sir. Remember that information is power. Thank you for passing the power on to others. !
@tomschmidt3815 жыл бұрын
Haven't been to a scrap yard recently but our town has a still-good shed at our recycling center. Brought home all sorts of treasures.
@designbybeck5 жыл бұрын
Not Ohio, but San Antonio, Texas! Love your videos! I share them with our 10BitWorks Makerspace community!
@starabagraxD5 жыл бұрын
Intro of this episode was exceptional. Keep it on
@alaspooryorick99464 жыл бұрын
Ahhh Gerolf... How I love your work!
@Lagggerengineering5 жыл бұрын
4:30 Ahh. Imperial system jokes. They will never get old.
@ProckerDark5 жыл бұрын
he's dirty for using that lol love it
@quequeg16434 жыл бұрын
i know this is a late comment but i just wanted to say i love these videos, such a great use of materials. it's amazing how much useful stuff gets thrown away
@LarsRibe5 жыл бұрын
Great video! And I fully agree on your wise words in the intro. We should all learn what we can to repair and reuse the wonderful machines we have build. Inspired by you, I instead of replacing my cheap Chinese powerdrill with another cheap one, got an old German one for 50kr or 6-7€. I got to work (I have only cery basic electronic skills) and it would benefit from a full makeover, it outperforms the cheap Chinese one.
@ralfb88695 жыл бұрын
Keep up the good work with these videos, very inspiring to repurpose rather than discard and buy new.
@stevoreno455 жыл бұрын
Wow very nice! Brother you're going to have a very nice workshop full of great tools for cheap cheap cheap!
@americanrebel4135 жыл бұрын
It would be wonderful to have the abilities that you have and the desires to do the things you do! Great video my friend thank you.