Great technique of the woodworker // DIY a very special rocking chair.

Woodworking Stories
Great technique of the woodworker // DIY a very special rocking chair.
The rocking chair will make your balcony more convenient and luxurious. With this product, you will have an extra place to relax after hard working hours.
Thanks for watching, LIKE, Subscribe & Share!
► Subscribe to channel: bit.ly/3rbyDny

[@ianwood8223]

I like the look and the effort that’s been made but I wouldn’t sit on it without a crash helmet

[@restorerestoration4705]

Thank you,i will repair again

[@ИннокентийМишеков-з2ы]

Назад уйдешь, она не устойчивая с зади

[@fawzye22]

I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great kzbin.infoUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.

[@restorerestoration4705]

Thanks very much . We will try in the next videos

[@simonbar7665]

Big like

[@restorerestoration4705]

thank you so much, please continue supporting my next vidoes

[@art-syam]

Какая порода дерева?

[@kevintruax8430]

What kind of grinding/sanding disc is he using? Anyone know?

[@restorerestoration4705]

I use grinding machine, sandpaper 400 no.

[@viktorijarozina7127]

Сел качнулся и назад перевалился

[@arthurcampiello92]

Ow shit!! 5:00

[@restorerestoration4705]

what's wrong

[@arthurcampiello92]

@@restorerestoration4705 the wood cracked. 🙁

[@arthurcampiello92]

@@restorerestoration4705 the wood cracked. 🙁

[@miguelantonio2091]

Cuato vale siya de gardinero

[@restorerestoration4705]

Thanks you...

[@misaelelenaguzman]

NADIE CONSTRUYA ESTO PORFA NO HAY BALANCE ANTERIOR LA PERSONA QUE SE AMAQUE FUERTE SE VA DE ESPALDAS Repito NADIE COPIE ESTE VIDEO! ESTÁ MAL HECHO EL TRABAJO!

[@restorerestoration4705]

[@henryfitzgerald4965]

All the rocking chairs I’ve seen elsewhere have the rockers oriented opposite to yours, with the long ends pointing out the back to keep the chair from tipping over backwards when someone gets a rockin’ ...

[@restorerestoration4705]

Thanks for your comments. I will try harder.

[@HoneyHollowHomestead]

@@restorerestoration4705 You did well. Can you unscrew the runners and shift them so they are longer behind the chair?

[@joseruiz-cc1mt]

Así es nadamas invertir

[@smoleyhokes]

I think there might have been a mistake or two made on this one. The rockers appear to be wrong and the arms look like they are mounted inside out. I can also see someone going over backwards in it.

[@restorerestoration4705]

no, it is ok, not wrong.

[@unlisted5150]

Hadn't noticed that brill you pointed it out but yeh.

[@joseruiz-cc1mt]

Así es falta veinte fierros parte de atrás balancín tirando hacia arriba

[@segundonoeruizceron9763]

Quedan muy adelante

[@sobrepena06]

The rocker was reversed...the longer rocker should be at the back to avoid turn over..

[@restorerestoration4705]

Thanks, I'll fix it.

[@sobrepena06]

I'm planning to buy jig saw so I could cut curve also..I was impressed to your video that even not carpenter can do that ideas thru watching to the skilled worker like you..👍 good job.

[@ericmartin8888]

He split the wood 😢

[@zapi1954]

Sólo clava sin pegante, éso no aguanta.

[@juancarlosbenvenuti7574]

No dan ningún tipo de explicación, por lo menos en que madera y espesores ,no me gusta

[@khoitran4033]

Ter broblema

[@angryburrito7411]

This was Chinese build quality. Built to last a week.

[@restorerestoration4705]

Thanks for your feedback!

[@javierjaquierz7154]

HERMOSO TRABAJO...!!! PERO EXISTE EL PELIGRO DE QUE SE CAIGA HACIA ATRAS LA PERSONA QUE SE AMAQUE CONFIANDOSE EN LOS PATINES YA QUE SON MUY CORTOS EN ESTA PARTE ...GRACIAS DESDE ARGENTINA.

[@restorerestoration4705]

Thank you for your comments. I'm from Vietnam

[@jonhatansuarez4767]

Iba a decir lo mismo

[@riduanmuktadirridu8502]

Add wood stick in the back side....otherwise you may fall

[@ronedwards1897]

i would prefer the longer curves at the back, i can see an accident coming.....

[@restorerestoration4705]

Thank you. be repaired already.

[@meongmiaw5421]

Off Ulun byk gawian di rumah .yg lainya sy byk ruginya blm perangkat rusa km senang aku senep

[@restorerestoration4705]

thanks. hope you give your enthusiastic comments

[@Durrttyy]

lol

[@germanmercado1679]

Tansiquiera expliquen xfa al español

[@khoitran4033]

Banco

[@gribanov-events9107]

🇧🇾👍👍👍

[@carllaflynn5878]

That beautiful. At first I thought it was. A rocking chair for two. But it's bigger than normal just a little... Beautiful thought nice work.

[@restorerestoration4705]

Thank you for your compliment.

[@stacystarnes1449]

Accident in the making.

[@iamjaxphoto]

Um, the rockers are backwards!

[@dioniciorosado7763]

Bad bad .you cant even seat all the way

[@restorerestoration4705]

Thank you very much♥

[@rezanazari2298]

Please tell me the size of the rock chair pieces, thank you

[@jeovanegoncalves]

👏👏👏👏👏

[@ADILKHAN-gh4xg]

🙏🙏🙏🙏☝🙏☝🙏

[@ПАВЛИНЫЧ-ч5ж]

Полозья надо вынести назад не вперёд, а то опрокинется user!

[@hamsack981]

Lol that thing's going to tip over if you lean back any. It about tipped over when he got out of it.

[@restorerestoration4705]

Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!

[@ТолікПшеничнюк]

Ш

[@art-syam]

Крутое кресло

[@eliretuya9887]

Bad design, prone to out of balance

[@ivan7964]

Chaval te has quedado corto de apoyo y se vuelca.

[@restorerestoration4705]

Hà hà :)

[@enereaguirre2462]

Comparto tu misma observación, le faltó el equilibrio trasero para no caer de espaldas, aunque no sabemos la manera de usar este tipo de sillas en ese lugar ! PERO MUY BUENA OBSERVACIÓN TUYA !

[@henryfitzgerald4965]

What type of finish do you spray on?

[@restorerestoration4705]

I sprayed the foundation and covered the ball. thank you very much!!

[@henryfitzgerald4965]

@@restorerestoration4705 is the finish a type of lacquer? Polyurethane? Varnish?

[@restorerestoration4705]

@@henryfitzgerald4965 that is varnish

[@henryfitzgerald4965]

@@restorerestoration4705 Thanks

[@ericgallardo682]

Esta para caerse

[@restorerestoration4705]

🤔🤔

[@perillodanisi2505]

Title should be : " Look how I work".

[@restorerestoration4705]

Thank you for your feedback

[@geoffgarrett5622]

Loved it

[@laurabradley20]

What color is replacing gray?

[@restorerestoration4705]

🤔🤔🤔

[@marcenariahobby7pallet]

seu trabalho ficou incrível👊👊🇧🇷💯

[@khoitran4033]

Marcenaria obrigado

[@carllaflynn3416]

First I want say what an amazing talent you have. I watch your videos daily. I am not at all a carpenter, I can not even use a measuring tape . I know a man that is quit large I want to make a chair that he can not break. I'm guessing he is some 400lbs.As a women and a caregiver I was wonder what materials and measurements I would need to make such a chair? Can you help me please