GREATEST Water Pokémon of ALL TIME is a Bead sprite!

[@samk8005]

Have you considered selling kits for a certain Pokemon since you have so many colors? That way people could buy exactly how much they need of each color.

[@beadamonpixels]

I for sure have, it would just take a huge amount of time to count them all out. Some Pokémon like charizard take thousands.

[@naturegirl2110]

​@beadamonpixels you can, if you don't already, sell the directions with how many beads/colors are needed for the design like cross stitch. Or maybe find a way to sell the entire kit with the counted beads, plus extras like diamond painting. I think that maybe a great and profitable venture for you. By the way, just found you today, great content. I do diamond painting and this seems like the male version 🙃

[@MikeyCyan]

Literally inspired me to get into this. Made gen 1 mew, but changed the pinky orange out for a lighter blue to make it look like the non exsistent shiny form. Thanks

[@MikeyCyan]

Posting again cuz now I'm even deeper... and it's fantastic. I don't currently have enough color variations for the gen 3+ sprites... buuut I have made 3 shiny mythicals now ahahahha Seriously, thankyou

[@splxg1436]

Tyranitar, garchomp, and excadrill pearler bead design. A gen 5 sand team sorta

[@Gikarin.Gamemaster]

New subscriber! Would love to see Shiny Dragapult with his missile children included :) I think this shiny would look extra baller glow in the dark too 👀👀👀

[@Rendosian]

Dude! Jacob/Lot665 from TT! Been legit worried about you! Glad you’re over here and okay!

[@beadamonpixels]

You found me! I’ve been frustrated with TT so I’ve been focusing more over here.

[@zephius_]

Hii odd request! Could you do Pumpkaboo? Its my favourite pokemon and i feel its underrated! :D

[@vinny-W-]

Hey, can you show us your wall and all perler projects you have done? Also an idea for a video would be where you get your sprites from (or if you use a specific site for the sprites. Also what you do if the site/software doesnt match the right color from the sprite (and how you change the size of a sprite [or if you do it]). Thanks for all the tips and vids. I have watched all of them and they are AMAZING! Which side do you display from your projects? (The flat ironed side or the "perler" side)

[@artemisarrow8492]

I would love to see togekiss unless you already did it at some point ❤

[@aStrangerYouProbablyDontKnow]

I really enjoy your your content and art and would like if you could make a trapinch sprite

[@ashtheaxolotl987]

If your ever able to can you make espurr please there my favorite lol😅

[@walterfindlay9982]

Instead of using blue tape you should try using drywall tape. It already has holes in it.

[@beadamonpixels]

That might not be too bad actually

[@themothrasisters]

Haha! Love how you smoothed it with your shoe!

[@beadamonpixels]

😂😂😂

[@heavyd4359]

I definitely feel like Clawitzer is a Pokémon that gets left behind. It’s Gen 6 but there’s a more than a few rom hacks that have made pixel sprites for later Gen mons. I feel based on what I’ve seen he’d make an excellent Perler bead project! 😁

[@ronaldomota9850]

Good

[@iambadatnamingthings3547]

I kinda wish you did more longform videos and not just shorts that are too long to be an actual short

[@beadamonpixels]

Yeah me too. I’m going to be switching to longer content. I work a lot outside of this and the shorts are easier to get out

[@ShurikenGreninja-bz4rj]

This is your latest vid and it was 2 months ago where are you

[@venessafugi6768]

I kinda wanna try peeler beads now

[@traxbun]

Yo any tips for where to start if you wanna get into this kinda thing?

[@knightM1A]

can you do a scizor sprite with a focus band on his head to reference the sword dance sweep style. i love this guy

[@leafwingking7310]

I already voted for flygon, but do you have any plans for the SV pokemons?

[@beadamonpixels]

Yes! I want to make some more for sure. I have a big back log of videos lol

[@RaxldaAxl]

Day 3 of asking for Cinderace named grookey.

[@NiaJustNia]

I'll post my question here too: This might be a dumb question, but have you ever tried modifying one of the trays by glueing the blades of pins inside the holes, then when it comes to poking the holes in the tape, you can just like up the pin plate with the bead plate and push down? That way you wouldn't have to individually pop holes in the tape

[@imprincesswolfy2565]

I don’t know what you mean by “glueing the blades of pins inside the holes” But regarding using the peg board to peg holes… it’s not a good idea kzbin.info/www/bejne/gnermZyOmbt2sNksi=soQ86wP8618NGWen

[@joannachang360]

can you make Dragapult and Aegislash and Duraludon

[@Karumaru-]

So where would I order one of these out? Do you have a website? I would love a Snorlax or a slowking. Also you do a very good job. You are like spot on with their sprites.

[@BADATSIEGE101]

Tyrunt pls this is soo cool can you do a tutorial

[@shaneorp6978]

Can you do Dedenne❤❤❤

[@Orsss]

What do you put on top of the perler as it cools? I tried plywood, but i think it textures the plastic some.

[@mitchjasper4371]

How do you know where to place the beads? What do you reference from?

[@tearsofbreaks]

Do you ever melt both sides?

[@beadamonpixels]

Can’t really and keep the pixelated look. If you try to melt the unmelted side, new holes appear on the opposite side

[@traxbun]

what size pegboards do you use? im not too sure what Ct means :(

[@beadamonpixels]

I use the normal size boards

[@arturox26a.p4]

I really want to know what kind of iron that is.

[@rustyshackleford1910]

Any chance to see the mareep evolution line? Ampharos is the best

[@rustyshackleford1910]

Gen 2 mareep is underrated 🥺

[@CatsRul85]

Qyestion how do you keep your peg boards from warping cause i have one startibg to warp pretty bad (i do make sure to weigh down the perlers- havent tried tape method yet)

[@beadamonpixels]

I don’t iron on the peg boards. Ironing on the peg boards will bend them.

[@CatsRul85]

@@beadamonpixels ah yeh that makes sense- you'd think for something meant to be ironed on they'd be made out of something more heat resistant (thankfully I think I've managed to fix the one board back /doesn't seem to be as badly warped anymore ) While not wide we do have a bunch of masking tape now so might give it a shot.

[@wildwolffurybolt7081]

Did you do haxorus already? or its shiny?

[@ryryh2737]

What application do you use to make the pixel art for the Pokemon?

[@n_e_k5504]

Love the art I used to have these and there is another way u could do it I'm not saying your doing wrong but on one of pages from the booklet I had that came with them showed a 3d cube u could make by melting both sides just enough that they stuck together was wondering if u would be able to do a 3d one??

[@jeremyyalch2055]

where do you get your sprites from, like just online or something?

[@NnekArt]

how do you ship these? Especially the really long ones

[@cc-zx3rc]

Do u use the 5 mm or 2 mm beads??

[@ashleypark971]

where do you get your containers to store your perler beads? ive looked everywhere and cant find them!

[@beadamonpixels]

I bought these off Amazon. They are actually photo cases from novelinks

[@ashleypark971]

@@beadamonpixels ok thank you sm! im just getting back into perler beads from like 5 yrs ago so these will be helpful!

[@QueenLethargy]

I've been watching your content for a good bit now, but I'm a little curious: Have you made any projects using the metallic or the mixed colors beads? I recently tried using the metallic gold beads for a project and I noticed it doesn't melt as smoothly as solid colors.

[@Maanlolakenny]

Pls go live and make one