Antec's Done It Again!

SPONSORS: Learn more about the Antec C5 ARGB: bit.ly/4aAepug
➡ Use 25% discount code 'SKGS' to snag Windows 10 ($16): www.vip-scdkey... and Windows 11 ($23): www.vip-scdkey...
Meet the Antec C5 ARGB, a beautiful dual-chamber PC case with an emphasis on both hardware support and aesthetics. Surprisingly, this case has a smaller vertical footprint than a traditional mid-tower and yet is capable of packing more hardware. This may be the last case you'll ever need...
⭐ Consider supporting us on Patreon! / gregsalazar
🛠️ PC parts list:
Intel Core i9 12900K: geni.us/WXnkEg
ASUS ROG Maximus Hero Z790 BTF: geni.us/oszCB
32GB Kingston Fury Beast DDR5: geni.us/FKEIXbT
ASUS ROG Strix RTX 4090 BTF: geni.us/173Stt3
Antec C5 ARGB: bit.ly/4aAepug
1TB TeamGroup MP33 NVMe: hgeni.us/ArJJ
Arctic Liquid Freezer III 360 AIO: geni.us/NMJAc
Antec NE1000G M PSU: shorturl.at/tvIQ7
🎬 My studio gear on Amazon:
Sony A7C (Primary): geni.us/lOeoIA9
Sony a6600 (Secondary): geni.us/k8VBToq
Sony a6400 (Webcam): geni.us/24nqw
2x Pixio PX277 Prime 165Hz IPS Monitors: geni.us/bCg4nD
Neewer LED Lighting Kit: geni.us/9VTXr0
Audio-Technica AT2035: geni.us/xvQc
Yamaha MG10XU Mixer: geni.us/d4VvGM
Neewer Microphone Arms: geni.us/1w5Sx2Y
Arrowzoom Sound-Damping Foam Panels: geni.us/EKFxZc
📱 Follow me on social media:
TWITCH: / gregsalazar
FACEBOOK: / gregsalazaryt
TWITTER: / gregsalazaryt
INSTAGRAM: / gregsalazaryt
💻 Join our public Discord server: / discord
🎵 Channel music provided by Monstercat: / monstercat
DISCLOSURES: All Genius links are tied to our Amazon Associate account, from which we earn a small sales commission. Links containing a 'bit.ly' reference forwarding to Newegg are tied to our Rakuten account, from which we earn a small sales commission. All sponsored links and comments will contain the word "SPONSOR" or "AD." Any additional revenue stream will be disclosed with similar verbiage.

[@TheGameBench]

It's nice to see Antec making a comeback.

[@Ryathael]

Seriously, kind of has me hoping for an updated Antec 1200, my favorite case from them. =\

[@patrickmarshall7718]

I've built 3 personal pcs. all antec, multiple for friends also, they even have one that looks like nzxt h9 that my current system is going in. just dont use the stock fans. even their upgraded fans seem to only have 2 modes, slow and fast.

[@Ooze27]

@@Ryathael Still have an Antec One :D

[@strongXP]

that Arctic AIO look so nice, its now on my wishlist

[@Boba_Fett1980]

Don't have an antec case, but bought antec case fans a few months back for my first PC build and they've served really well, no issues at all. They really are awesome

[@rHinosYth]

One of the best case builder like 10-15 years ago. Then they kind of disappeared a bit after that, but the cases they have been putting out are recently are impressive to me.

[@jacksonbtb571]

To this day i miss my old antec 900 case. I wish they would just relaunch that lol

[@MrBeetsGaming]

Pretty sure holding the RGB button down is how you switch between controlling the RGB with the button or whatever software you might use.

[@GregSalazar]

Yeah, every case is different when it comes to this. Wasn't sure. Some just reset the color cycle.

[@williammathies2998]

Thanks!

[@GregSalazar]

Thanks for the support!

[@JusstDexx]

Every time I watch a pc build from any content creator I am reminded that I’m being called broke in a nice way

[@asmokun]

Same FOMO eats at my soul.

[@thehoss]

FACTS lol. Another review of this made a $3,000+ system in this $130 case....ya I can't afford that

[@jestah7251]

I bought this case about a month ago, it's such a nice case. I did an atx build with top 360. If building in this, you need to run cpu power before mounting motherboard. May have to remove or at least unscrew a bottom fan or two to do the front panel, fans, rgb, etc. Honestly, it's my favourite case I've built my pc in.

[@RANDOMNATION907]

It's nice to see the back connector idea finally gaining momentum. Reverse flow fans too.

[@robertscheffler8455]

I see this build in my near future! Thanks Greg and Antec

[@MrRayr1953]

Great looking built, great job Greg.

[@wayland7150]

Excellent case Greg and your cable management is so clean.

[@WB_Ryuko]

Thank you SO much for showing the AIO fitting at the top. I've picked up the exact same AIO and it took a lot of pain to get in to my current case so I've been looking for something at a good price exactly like this.

[@hal6yon]

Nice to see Greg repping the spanish national team

[@dpb9652]

I have been looking at getting me a 300something mm fan in my system! Build looks great!

[@roped2theground]

I bought the performance ft1 and its awesome. Great case for a great cost with all the fans needed.

[@BuzzTec]

Sweet build Greg. Antec cases of late are sooo cool.

[@denault3985]

Ah so clean, great build Greg!

[@Shot_Kawla]

It feels like Greg has been putting out a lot of content lately. I dig it.

[@outlet6989]

Hi Greg, what do you like doing the best? Doing a Flip or Flop or building a PC? When building a PC, you can connect the MB power cables before mounting the MB in the case. Doing this lets you connect the top left MB power cables and route them through the PC case before installing the MB. This is a suggestion, and your mileage may vary.

[@MarcoGPUtuber]

Greg's done it again! Another great video!

[@dontmindme5821]

I wish I was closer to Orlando man I was having some issues with my pc but I did get some help from the peeps in the discord so shoutout to them!

[@JonathanBradysouth-africa]

Great build. Beautiful Case

[@GregSalazar]

Glad you like it! Thanks!

[@vvip1412]

10:46 Thanks man I was looking how to change the RGB light 🤣🤣

[@NotAllTheTime]

I always wanted the P182 for the old days of water cooling with a mod to put the rad at the top. I couldn't afford it back then but keep tjinking of getting one for a retro build!! Oh, and another great video Greg 🎉

[@bertgo305]

very impressive case for the price it's perfect Greg!

[@Miniputt_999]

Absolutely beautiful build. really love Antec cases and their other products. Would really love to one day have a btf build like that. but then again, i am very happy with my Antec Performance 1 case and all the hardware in it :D Looking forward to the next video :)

[@wolfenher6937]

My sister has this same Antec case but she got the all white version and it looks really amazing. She nearly had $3000 worth of parts built in it

[@marcsantos7087]

Nice build Greg. Also for Antec case ARGB controllers when you hold down the button it sets it to let the Mobo control the lights.

[@pcbuilderlover4271]

I still have a working Antec power supply from the 90s. They have always built what I consider the best made PS. Nice looking case.

[@97BuckeyeGuy]

A surprisingly nice case from Antec. Nice to see.

[@pikaporeon]

Glad to see antec making a comeback o worked hard recently to source an old sonata 3 for my xp rig

[@claytonmorgan8625]

Really nice case, would have like to see some Temps posting in the video also. 😁

[@Nein99x]

Antec already made an amazing return with the antec performance 1 ft. It's nice to see them making good cases again.

[@johnvandeven2188]

This is a sharp and aesthetic looking PC case. It is the right height for me. I have visions of a tall case that can be accidently toppled over. What I would prefer is a case with a horizontal mounted motherboard which would allow for a monstrous air cooler and heavy/large video card to be fitted without placing any gravity strain on any component but especially the motherboard. Yes, I am fairly OCD as well.

[@HOLY_FRIJOLES]

Did you not put the rear fan in because of the aesthetic, or because it wouldn’t fit behind the aio radiator? lol

[@hasanalpaslan8202]

Great looking build Greg. How did you manage zero gpu sagging?

[@courtbouchard444]

I believe when you hold down the button for LED it syncs it to the motherboard aRGB so you can control it from the motherboard settings

[@alwayshappy9430]

thx for this, ive been looking a video for cable management for this case

[@GregSalazar]

Thanks for watching!

[@Wayne70]

The rig dreams are made of, yet another great build Greg.

[@GregSalazar]

Thanks for watching!

[@MrBeetsGaming]

It looks great but I would love to see what it looks like with an air CPU cooler.

[@GregSalazar]

Can't please everyone hahah. There is too much in the way of AIO support in here to neglect using one, IMO.

[@_FLAK_]

I love my basic 5 pack of antec fans. I have them in three different builds. So afforable, quite and good amount of air.

[@francistaylor1822]

I have a C5 in my sim rig, its lovely

[@J_Gilliam]

This case is so rad! I do wish Antec would offer it without the fans, for someone that would prefer a different fan setup.

[@ArgumentChannel-po1bt]

I don't know why, but that it's available in my local store. It costs $60 less than the fans version. It's 58 USD the C5 non-fan version.

[@ady5713]

This is hands down one of the cleanest awesome builds you have built 👍👍👍

[@GregSalazar]

Wow, thanks!

[@WhiteG60]

Looks heavily "inspired" by the O11Dynamic. Still looks good!

[@francistaylor1822]

honestly they are all inspired by different companies theres little genuinely new

[@Gutek313]

Sweet build, I'm sure it's nice and quiet with all those fans

[@UNIX32]

My PC is built in the Antec VSK3000 Elite, I can say it's a really amazing case.

[@Ladioz]

Beautiful case. I would probably replace the fans with some BeQuiet Light wings for silence

[@GregSalazar]

These fans are plenty quiet. IMO not worth tossing out 7 perfectly viable fans for models that may only be a few dB quieter (especially for the cost).

[@nickyyves2678]

so.. how is the GPU connected to the PSU ? is it via the motherboard now ?

[@shivavsk6178]

It’s project btf. It’s a project from ASU’s where they get rid of cables so as part of this the card gets power from a special port near the PCI’s port.

[@bentong7462]

I cant see the gpu cables. Is it also hidden?

[@WouterVerbruggen]

I also wouldn't have to worry about not reaching connections behind the heat exchanger... You just connect them before installing the cooling loop...

[@jennjhf9713]

After the last build in a rear pass through case I was hoping you would do a tower cooler, would love to see a build without any wires/cables/tubes

[@oMagz]

Greg is my dad

[@averagetomas5755]

Brother?

[@OleBrumHonning]

Mine to, we must be Brother and Sister 😂😂😂

[@joostul]

Greg is my daddy

[@fooferbob9230]

Dad is my Greg.

[@Theleftisdesperate]

Daddy is my Greg

[@taylorbertrim7625]

Looks great. Clean looking. Nice case actually, and the reverse fans are a nice touch. I've built so many PCs over the years, I always hook up the motherboard cpu power before installing an aio. Lol I've been down that road more than once.

[@donavanfiford3149]

Antec looks getting so muc better

[@nfugitt89]

I would love a case like this with solid front and side panels

[@animalyze7120]

Nifty lil case, well worth the cost for the features. The fans need adjusting however, that bottom intake fan on the case floor up front needs to taken out as it will cause vortex issues with the lower fan on the side panel. Great build and great lil case.

[@SKLL3TR]

That's a great price for such a case, i wish Antec was more available in the Middle East they make really good cases with a reasonable price

[@wole04]

There's no dust cover for the side intakes? Wouldn't that dump a lot of dust into the case? The top exhaust prob doesn't need a dust cover as well

[@Molasar54]

I loved Antec's Cases in the earlier days, this case is only $20 less than the Lian Li 011, so just depends on what you are looking for.

[@sinformant]

I just finished my build a few weeks ago in an antec c8 constellation. Absolutely love the case. Quality is through the roof, but beware with the quality comes weight. My build with a rtx 3090 and a 360 aio weighs over 45lbs

[@Darren_Martin]

Yup. The C8 is on my wishlist too. It's 23 lbs to ship, however. Given that the courier to my country charges by weight, it will actually cost 12% MORE than the selling price to ship it to me. Sigh. Amazing case and way cheaper at $77 than the C5 (just without the ARGB fans) but so darned heavy! I'm gonna bite the bullet and ship it soon.

[@sinformant]

@@Darren_Martin I got mine with a discount at the time and it was basically $114 shipped from Amazon with taxes. It is a big boy! But that just means more room for activities. I really love the removable hdd and ssd cages in the back. There is a cage for 2 ssd's up top and another identical at the bottom of the case. Then below where the power supply mounts there is a hdd cage that holds 2 or 3 hdd's. I don't run any Spinny disks so. I took it out and that opened up a ton of space. I mounted my 360 aio vertically so it sucks in fresh are through the separated chamber, however I eventually plan to model and print some ducting that seals the back mes panel directly to the back of my radiator for maximum air flow channeling. I may even make some filler panels to seal around the bottom fans since with 3 120mm fans there are gaps between them.

[@GT43632]

​​@@Darren_Martinwait c8 is less expensive than c5 in your region? That's awesome because in my region c5 is more cheaper and considering I don't need to extra fans for it,i think c5 would be a better choice for me.

[@Darren_Martin]

@@GT43632 That's what Amazon says, bro. Lol. No argb fans, I guess... $77

[@ForzaE2]

Awesome build, great case.

[@GregSalazar]

Thanks for watching!

[@mattwest8073]

Will it be enough to give up my 14-year-old Antec P183...not this time, but good to see Antec making a comeback. I hope that they kept the Antec quality of old. My original Antec tri-cool fans are still spinning after 71,000 hrs.

[@SirChartsAlot]

I kinda like that lower profile look and of course the connections on the back of the mobo help a lot...overall great looking pc 👍

[@chrisleyleonlewisiii9644]

I got a antec case and love it got it on sale for 60 bucks it's built pretty premium for that price

[@ewanb1632]

was tempted to rebuld in my 902 again, but this might do, nice build greg

[@GregSalazar]

I appreciate it!

[@marioStortuga]

You know what I really like this case

[@jahsoul357]

Came in for mesh; runs out because of tempered glass...lol

[@DavidHolden15911855]

Greg is there any chance of listing prices for more than just the case in builds like this? maybe a breakdown of the total cost of the build broken down by components?

[@509212301]

the only issue I have with this case is that not many places are selling it in the UK, in every site it is always in pre-order :(

[@Justmakesomenoiz]

So with an artic 360mm cooler and an atx board your not able to get to the connections on top? Is it beacuse the artic is so thick or does that apply to all liquid coolers? And can't you move down the mobo a bit further down perhaps?

[@kickasskee9546]

Love the channel ❤❤

[@MrJuice315]

would've been nice to see a verticle gpu mount in this.

[@TeamAmaya]

ive always like antec case very underrated

[@MrSparkefrostie]

Any chance you recall if these fans chain thevargb or just duplicate? I would rather have an Arduino control but if they each need their own connector it takes a bit more

[@Dan-Simms]

Such a nice build

[@Megaman-Zero-626]

Nice looking case!

[@MrVoicemailGuy]

Good Lord this build looks so darn good😍 I wish this was a giveaway!

[@Faticecr3am]

Wow very nice and there are fans included unlike the c8.

[@DarkMatter1992]

The Arctic logo is also quite similar to the Antec logo, it's the little things.

[@LifeIsButaBluff]

If Antec produce such a case at that price highlights the extent that we get ripped off for cases.

[@DiscoCj]

this is legit the dteam build , i dont like aios so that will change out but so good and clean

[@ThaEazy1]

why would you put a magnetic filter if that 360 is blowing air out ??? pls do tell

[@big-mart]

Ooo Antec cases are so good, best build quality out of everything I had so far (Deepcool, Silverstone, some older Corsairs). I'm still rocking the P101, an absolute wardrobe but does everything I need perfectly. Once I need less hard drives and more bling, I'll be sure to consider this :)

[@CARVI3D]

Hola Greg, quiero comprarme este chassis, lo recomiendas?, que tal los ventiladores

[@brandon_gb]

They must of spaced that usb c for the steelseries wireless headset dongle ? Its oddly wide.

[@shovelface6874]

Do I plug all case fans into hub then plug the hub into motherboard If so what port And does that make it so I control all lights from pc

[@juleswinnfield6266]

I just got a ASUS GT502 case and it’s similar to this one. Used the Corsair ICUE link fans and AIO. It’s pretty sick

[@lucascubile7141]

Greg have you tried using an ATX mobo in this? Would the bottom fans conflict with front panel connectors? Ideally id want the C8 ARGB but it's not available in my country only the regular c8 (without any fans) and everyone knows ARGB gives more FPS....

[@Mech4MS]

Only thing I don't like are those AIO tubes near the GPU backplate, I've seen dead cards because of leakings

[@rascal.elder6594]

does this case support vertical gpu mount? please make a video on it.. pleaae please please

[@reaper117nobody7]

i want to see case manufacturers make matx cases but with the idea of making things smaller. i hate these recent cases that are super wide. i want a small footprint but not have to resort to itx. it is really rare.

[@crowdaddy6472]

are you not putting a support on that gpu guess having all those fans on bottom of case might get in way with a gpu support

[@b9bot148]

Why did you remove the rear fan?

[@EXOWill]

I am old, but I don't see a graphics card power cable?

[@jrose-xp6tf]

It's a rear-wired board.

[@EXOWill]

@@jrose-xp6tf Ok, thank you. Is the card different than the other 4090's that have the power plug located in a different location from this one? Please educate me.

[@jrose-xp6tf]

@@EXOWill The PCIE contact pins have an additional set of pins to receive power via the board into which this PCIE power cables have been attached in the rear of the board.

[@EXOWill]

@@jrose-xp6tf Thanks. I think I've seen that before. Forgetful ....

[@glennpatrickdomingo584]

wondering where is the Antec case that looks like the AP201 that they displayed in Computex 2023

[@trailblazer7108]

I just bought this case. It’s too small to be an easy build, it’s just not an easy build. Motherboard pins at the bottom have absolutely no space and almost slip under the bottom fans. Wires from the top such as cpu power also have no space and need to slip under the top fans - it’s a real pain. I needed to remove the bottom fans to install the wires. You’ll be happier with a larger case. That being said, I can feel those fans working, which is nice.

[@matthewball5978]

Whats the song during the 10 second timer?

[@Greggg57]

I already have all the fans I need.