Why Do I always watch install videos for parts I don't have yet? I want!!!
@spicybankai7 жыл бұрын
jsego01106 or for my case a car you don't have yet haha.
@waybach4 жыл бұрын
That plastic bag trick was the coolest part of the install 😆
@clinester49 жыл бұрын
Glad I found this video! Installing mine today or tomorrow on my 05 LGT. Pretty pumped! A local shop suggested the Grimm Speed over a few other brand, and I'm not one to argue with a pro :D
@runnerzx29 жыл бұрын
GimmSpeed- First off great product. I finally had the chance to install mine on my 05 LGT and the final result is outstanding. Only issue I had was that in your instructions you don't list the step where you have to remove ( in an LGT anyway) the metal bracket that is in the spot where the included front stabilizer and bracket bolt to the engine. No idea what this bracket was for other than it had a small sensor clip on it that I had to remove and zip tie out of the way. I'm sure even the less mechanically inclined could figure it out but just wanted to mention it.
@GrimmSpeed9 жыл бұрын
You're absolutely correct! We're working on a version of this video that is specific to LGT fitment. We don't have one as a shop car anymore, so access is just a bit more difficult. Glad you got it installed with no problem!
@brendanmurray8424 жыл бұрын
GrimmSpeed more then welcome to install one on mine 😜
@gnuojoung9 жыл бұрын
4 push pins also hold the back of the splitter too.
@LostInPhilly899 жыл бұрын
I have never wished that I had $1,000 at my disposal more than right now. This intercooler looks absolutely stunning! Not that I would expect anything less from GrimmSpeed, mind you. I'll have to put this on my list of things to install once the car is paid off. Now for the newbie question. I have been around Subarus for years, but I am somewhat new to the whole turbo boxer scene. I do know that there are certain things you can't do to these engines without remapping the ECU. Is an intercooler swap one of these things?
@GrimmSpeed9 жыл бұрын
Thanks for the kind words! You intercooler is one of those things that can be swapped without tuning changes! If you're highly modified and running speed density, things change a bit, but for 99% of enthusiasts out there, you're perfectly safe just swapping it over. Here's the catch, though. Since it's more effective than the factory intercooler, you'll gain a nice 'safety net' on your current tune, but a new tune will allow the tuner to take advantage of the increased cooling to make you more power. The choice is yours! A lot of people will swap them on and then wait until their next 'must tune' mod before hitting the dyno. Cheers!
@LostInPhilly899 жыл бұрын
GrimmSpeed Awesome, thanks for the tips! You guys are the best. :-) FYI, thanks for supporting the 48hrs of Tristate again this year. I never may have found out about GrimmSpeed if it weren't for that and I buy from you guys whenever possible.
@yay4meluigi7 жыл бұрын
Thanks for this helpful video and making an awesome product!
@qbanwrx5117 жыл бұрын
Looks great but doesn't seem to be any room to run a strut tower bar??
@dustyy_d5 жыл бұрын
Does this require a tune?
@brendanmurray8424 жыл бұрын
Yes
@midnightthinker54793 жыл бұрын
I hear differnt i hear no but to see any diff i hear hes
@BertoAranda9 жыл бұрын
Great stuff guys !
@GrimmSpeed9 жыл бұрын
+09BertoSS Thank you!
@winsonlai81679 жыл бұрын
You mentioned a tune would take advantage of the increased cooling capacity but what If I was switching from a verticooler to this? They are both much bigger than the stock tmic. I would think that a tune is even more not required right since I was already tuned to the verticooler?
@GrimmSpeed9 жыл бұрын
Winson Lai I'd say that you're probably correct. Close enough, at least, that it wouldn't warrant a fresh tune. Personally, I think it's a great decision, but do you mind if I ask why you're switching from the Verticooler to the GrimmSpeed TMIC?
@clubdredd13377 жыл бұрын
Yeah why are you switching?
@dancisneros81697 жыл бұрын
Can't decide if I should go with GS or Processwest, both are top notch, decisions.. decisions..
@TheRandomname951 Жыл бұрын
I’m curious what did you end up choosing? Thanks!
@dancisneros8169 Жыл бұрын
@@TheRandomname951 I went with the GrimmSpeed TMIC can't go wrong with either
@brandondiaz566211 ай бұрын
@@dancisneros8169 how was it on your wrx
@joesantos71967 жыл бұрын
Love mine.
@ZachDaviswrx Жыл бұрын
Hey I just need the hardware and coupler’s for the intercooler. Can you send me the link for it?
@chrisdouglas44278 жыл бұрын
Well it fit if using a front Strut tower bar?
@dailydistruction2 ай бұрын
Is this upgrade carb legal in California?
@EJL20046 жыл бұрын
Dang. Love Grimspeed products, but I don't think this will work with my AEM strut tower brace on my 2011 GR.
@mitchelpenney32897 жыл бұрын
wouldnt happen to make a top mount kit for the 2002 legacy Be5 twin turbo? love the way this one looks but sadly wont fit my car.
@alsdkfjdlkjfdfdf7 жыл бұрын
This is the best car porno I've seen yet!
@slackin_24236 жыл бұрын
Hey so i know you need a tune for this but how bad would it be running stage 2 with this without a tune? Nothing horrrible right. Maybe no peak boost?
@jordancraighead9 жыл бұрын
is the music Gramatik? sounds like Eric Krasno on the guitar
@Triviohm5 жыл бұрын
The Floozies. i love that grimmspeed uses their music. They're my favorite live show of all time, this song is called "Stuntin"
@jastrudel8100 Жыл бұрын
Would this fit on a 2006 Rhd Subaru Legacy?
@Spartanic899 жыл бұрын
What are the correct torque specs on the bolts on to the turbo pipe and other supporting brackets?
@wagongga9 жыл бұрын
On the legacy can the original splitter discarded complete? I ask as I am coming from process west TMIC and I had to modify the stock splitter.
@GrimmSpeed9 жыл бұрын
Yes! The GrimmSpeed Legacy GT splitter will completely replace the factory splitter. It bolts directly to the hood using the OEM hardware. Hope that helps.
@cbr600rx72 жыл бұрын
Do you have a kit for the 09 forester XT?
@GrimmSpeed2 жыл бұрын
Our 08-14 Top mount will fit. The only problem will be mounting the intercooler splitter.
@78sebby5 жыл бұрын
Hi, I've got an Impreza III 2011 2.0D. Is it possible mount this intercooler on my car?
@Bandit45577 ай бұрын
No
@MrJames68914 жыл бұрын
I have this top mount, and grim up and downpipe. Curious which stock frame turbo to go with after ai build motor so I may keep using the tmic
@BussyConnoisseur3 жыл бұрын
I'm small brain. This the impreza wrx right?
@deybi1 Жыл бұрын
I need the o ring don’t know where to get it
@s0nnyburnett9 жыл бұрын
Don't think I've ever needed a 13mm socket for anything on a Subaru before.
@GrimmSpeed9 жыл бұрын
So what you're saying is that you can't wait to let your 13mm socket stretch it's legs? :)
@s0nnyburnett9 жыл бұрын
GrimmSpeed But it's still new and shiny and I don't want to get it dirty.
@SlingSalsa6 жыл бұрын
I have always needed a 13mm on any subaru I have worked on over the years
@vjuOG2 жыл бұрын
would this top mount intercooler work with the killer b motorsport extreme flow hard turbo inlet?
@GrimmSpeed2 жыл бұрын
Hard to say as we don't fit test our parts with many other company's parts. I would say it should because both feature 3" inch inlets and are connected with a silicone coupler.
@vjuOG2 жыл бұрын
@@GrimmSpeed Okay I assumed so, Ill be testing it out soon here so hopefully all goes well.
@JoseLopez-dv5rk2 жыл бұрын
Does this tmic require a tune or can i just install it and drive on
@GrimmSpeed2 жыл бұрын
For best performance results we do recommend getting the car tuned after install. But it is not absolutely necessary.
@JoseLopez-dv5rk2 жыл бұрын
@@GrimmSpeed thank you
@yesun69618 жыл бұрын
how many Hp it can hold?? if i go 500hp on my 13 wrx??? thank you
@SlingSalsa7 жыл бұрын
does it clear strut tower braces?
@wafflehater9 жыл бұрын
is a tune needed afterwards?
@SleepingJake9 жыл бұрын
A tune is not required but would be needed to take full advantage of the intercooler.
@GrimmSpeed9 жыл бұрын
Jake is correct! No tune required, but to take advantage of the increased cooling capacity, a fresh tune never hurts!
@directgenesis4 жыл бұрын
I Was about to ask the same Question.
@trajik782 жыл бұрын
Shouldn't this also fit on a 2009-2013 SH Forester XT? How's fitment with a strut brace?
@GrimmSpeed2 жыл бұрын
The Intercooler will bolt up, but we don't offer a hood shroud for it at the moment.
@sosicklancer177 жыл бұрын
whats the power limit on these? building my 07 lgt and looking to be around the 500whp mark. Does anyone know?
@colinfecteau24329 жыл бұрын
I just ordered this for my car. do I have to get a tune? I don't have any crazy mods but my stock on broke so I figured go with the best.
@GrimmSpeed9 жыл бұрын
+Colin Fecteau No tune required, although with the additional cooling capacity, a tuner would be able to safely tune a big more aggressively in order to produce additional power. In either case, you should notice that the loss of power that you previously experienced due to heat soak is gone entirely!
@TravisCartland2226 жыл бұрын
Looking to upgrade to Cobb 20g Turbo would this intercooler upgrade be strong enough to run it??
@GrimmSpeed6 жыл бұрын
Absolutely! plenty of our TMIC' on stock location aftermarket turbos are running 450+WHP
@jellie334149 жыл бұрын
Who sells legit parts from you guys? I am highly satisfied with how this intercooler compares to the stock one and the quality of the product itself.
@redkaripper259 жыл бұрын
Rallysportdirect.com
@dennisphillip25803 жыл бұрын
Will this fit a bL5 2003 subaru legacy b4
@GrimmSpeed3 жыл бұрын
Most likely not. This version is designed to fit 05-09 Legacy GT only.
@Wenk23 жыл бұрын
If I have a bov is it ok
@GrimmSpeed3 жыл бұрын
As long as it's an OE-style flange, you'll be able to mount it right to our TMIC
@derspabvogel7213 жыл бұрын
Can I install one of these on a non turbo 07 Subaru Impreza? Figure I didn't buy a WRX but I can turn it into one.
@GrimmSpeed3 жыл бұрын
If the car is non turbo, an intercooler really wouldn't do much good.
@user-hb1uo6vq3j6 жыл бұрын
Whys this dude at home depot though? xD
@VanIsleNuckFan3 жыл бұрын
Its almost as if they designed the hood scoop size to receive upgrades.. Hmmmmm XD
@jamieavey29912 жыл бұрын
That was a struggle
@GrimmSpeed2 жыл бұрын
Getting the Intercooler back in place can be tricky. You must have patience to complete this job. 😂