🟢 How to Make Precision Dowels on Table Saw - DIY Table Saw Dowel Making Jig 👉 FREE PLANS 👈

[@jokoheruutomo9252]

I searched on youtube videos about making various dowels and found easier methods day by day, but i think yours is the climax of my search. Thank you for sharing my friend..regards from Indonesia.

[@otaciliofarias5669]

12345678901

[@MarkJonesRanger]

Thanks. Made one yesterday and made 30 dollars worth of walnut and oak dowels. Best jig award. Thanks for sharing.

[@terry2346]

Finished mine and made some 5/16th, 3/8, and 1/2 inch dowels from oak stock and all of them turned out great! No need for buying high priced hardwood dowels anymore!! Could not be happier with it. Did add a guard onto the back end to prevent any "biting"

[@allenhess6583]

Thanks for pointing out that you made the dowel hole to close to the table. You’ve probably saved a bunch of woodworkers a bunch of frustration.

[@Balenza345]

This is the best dowel maker I've seen yet.

[@belakulcsar]

Mee too

[@MarkJonesRanger]

Made a bunch of quarter inch dowels today with the jig. They are more finicky then the 3/8" dowels. I found the smaller stock size would splinter if I tried to pull the part that was in the drill chuck like I did with the 3/8" dowels. The quarter inch dowels wouldn't take the stress as well. I just cut off the square part. Worked very well once I got it dialed in. I did make a extra set of blocks as my first set had shifted and went back to just a 3/8" starter hole to the quarter inch out hole. The tolerance with the quarter inch dowels is much more picky. I went from having a few store bought dowels to having over a hundred just using my scrap oak, maple, cedar, walnut. The oak gave me the most trouble in the smaller size of dowel. GREAT JIG!

[@jackdotzman2908]

Absolutely a fantastic idea. Thank you. From Missouri USA

[@cyrilnorrie8450]

this works better than any dowel maker I've seen and doesn't involve making a difficult to make cutter. Thanks for sharing.

[@elijahbachrach6579]

I finally gave this a try only because this design is compact enough to be worth the space.

[@pro100bbcdesignfreelancers5]

Very easy to make! Perfect result! I've watched a lot of videos and this is the best dowel making device I've ever seen. So far I have used a metal plate with matching holes. Now I`ll make this dowel maker. THANK YOU VERY MUCH for such a detailed video.

[@johnlshilling1446]

I can't improve upon the comments that are already here, just like I can't improve anything about your dowel device. The fit and finish are second to none. There are a lot of great ideas here on KZbin, but few demonstrate the skills you've shown. Very nice. This could be a real money maker for anyone willing to make dowels. Quality dowels "Not Be Cheap!" They are hard to find and seldom come in a variety of woods. Plus, chucking a drill onto the finished end would allow you to finish each dowel by pulling the final few inches through... Worth it instead of just cutting off the square end? IDK... Just a thought. Just a little less waste.

[@Alex_Erickson]

You are an excellent carpenter. He is very friendly for making his great achievements available to people who admire his work. Thank you my friend!

[@RenotSemaj]

Making dowels, as much fun as you can have with your cloths on

[@AndyUK-Corrival]

Need to make a fair number of long dowels 16 and 20mm and out of all the dowel making videos this one seems to be the one I need. Thanks for sharing. Andy UK

[@AnthonySmith-nj9os]

Thanks for sharing I have been looking for a reliable way to make dowels and I think this is awesome.

[@philipcatuogno2968]

I'm. Attempting. TODAY!. The other jigs where you pound the dowel through metal or even chuck it up to drill are just a royal pain. Too much effort for one stinking 4" dowel. THANK YOU! Hope I can make mine as precise as yours.

[@xcuse4tools]

Thought this was a great design and built it, inititially dowels were coming out undersized. Realized that when I marked the high point of my blade, it was in the full up position. Later when using the jig to make dowels, the blade was lower. My saw pivots when raising the blade so the high point was actually further back. Once I adjusted the mark on fence to correspond to the new peak worked like a champ. Apprec I ate you sharing the design.

[@stephenmann8972]

Best and most accurate dowel jig on the tube. Thanks for sharing

[@dariocampos7464]

Thanks,your system is perfect. My english is quite poor. But is an awesome jig,very useful. Thanks. Greetings from Chile.

[@adilgamza5952]

ты гений...и все гениальное простое...как миллионером стану ..миллион подарю тебе ))

[@GRINwood]

Спасибо, бро, жду с нетерпением )) Удачи тебе!

[@ronhammar1154]

That would be a good way to make arrows for a recurve bow! I am thinking cedar with a lamination of hickory or ash or maple in the center to stiffen them as well depending on the poundage of the bow !

[@creativewebmedia-uk]

Excellent Video and brilliant Idea. Very well executed

[@openlittermap5485]

Thank you very much for showing this! I had already created a very 'no nonsense' dowel jig what was working (without the tablesaw), but i kept thinking about one with the tablesaw, came across your video and decided to make it tonight. I did change some things (because that made it easier for me: - i did not do your thing with the bolds and wing nut-thingy, i just uses a screw that i can turn in and out (filed the tip of a little) That saved me a lot of time and i believe it works as well. Ah, and i had to make the jig to understand why you created the part at 3:07, i thought you used it to make it easier to insert the long stick, but it had a different (better) reason ;-) I made it tonight, and tried it on one (i only created 1 size for now) and although the top of the stick came out smaller (i think because it was not really centered when entering), the big middle part was perfect. Thanks again!

[@stormman8393]

Mate you are a genius

[@theogriengl958]

Eine sehr gute und simple Konstruktion. Die Genialität liegt hier wohl in der Einfachheit. Eine besondere Hilfe in der Werkstatt. Regt mich zum Nachbau an. BG from Austria

[@jtc1947]

If You are going to make ARROW SHAFTS? You need "anti-whip" blocks to support the free ends of the dowels. Just an idea. GOOD WORK!

[@GRINwood]

Good idea, thanks!

[@kliomania_history]

Это тот самый момент, когда на приспособление тратится больше времени, чем на саму работу - и это правильно! Ещё бы стружкоудаление сверху провести - будет вообще круто! С меня лайк за идею, воплощение и работоспособность! =)

[@Владимир-д2ы8г]

Ваня, при помощи простой лерки нужного тебе диаметра, вставленной в плашку, и зажатую в тиски ты сделаешь тоже самое. И никакой головной боли с изготовлением всяких не нужных " приспособ". Старинный дедовский метод , кстати.

[@АлексейКовшов-л5б]

Супер прибор! Обязательно себе такой сделаю! Огромное спасибо мастеру!

[@TienTipsTrick]

Tôi cũng đã làm như thế này và thành công,bạn thật tuyệt vời khi chia sẽ video này

[@rural_chronicles]

Найкраща приспособа, яка достойна копіювання! Нещодавно придбав дешевого станка та шукаю додаткові приспособлення, для покращення його роботи.

[@hannahalexander7005]

Nice set up on the sawdust catching

[@luisramonferro.lamazares7844]

Thank you, Once more you have showed me something that I will be pleased to make thanks to you, carry on with your good videos and I will be pleased to make all the great things you are showing me. Thank you great work, Best of luck 🤞 🍀👍

[@CreativeIdeasMaker]

*You have done all this work beautifully, and most importantly, it is a production product that is widely used in carpentry work.*

[@ronnyrice697]

You really have done a great job with this one

[@elguahiro]

Dude! You're a genius! I have a lot of young birch trunks on my ranch. Now I know how to use them .

[@AverysMan1105]

Most efficient plans yet😮

[@Usonian7]

Slightly complicated to make, but definitely the best dowel maker I've seen yet, awesome work!!

[@ahmedtwahir]

Amazing idea. Like a hand held lathe.

[@markeagles7383]

Love the finished product 👍

[@Suchkorez]

Как мне нравится смотреть на все такие столярные работы.))) Я и делатть люблю и креативить. Единственное что не люблю, так это видео монтажём потом заниматься. ))))))

[@davidlangston6927]

Great video. Yes very helpful, gives me great ideas to adapt this idea to my shop

[@cabman86]

You have some amazing skills my friend

[@m.rjoseph7616]

Beautiful Craftsmanship & Brilliant approach for easy dowell making bro

[@КириллМеха]

Ох, ничего себе ты разошёлся, вроде недавно совсем маленький канал был, а уже миллионы просмотров. Поздравляю. Great english language.

[@marcciesla9238]

Merci pour le partage. Encore une conception et une réalisation magnifique. Très professionnel ! Salutations de France

[@markpickard4416]

Just a thought has over time the rods that hold the blocks tight will dig into the wood until you can't tighten them so maybe countersink a solid washer so it doesn't dig into the wood!

[@bradlloyd3208]

Have seen lots of these DIY dowel makers, but this is just on another level...The best, - Thank you.

[@ebrahimhesin4048]

ماشاء الله تبارك. روعه ماشاءالله تبارك الله

[@user-daniyal_nazyrov]

Отличная работа! Всё работает. Не ожидал. Можно работать с различным диаметром. Супер!

[@cristianmosquera9605]

The first Dowel maker that work for me , congrats

[@GRINwood]

Thank you, Cristian!

[@TheSnekkerShow]

I appreciate the mention in the description, and I like your version of the jig. Great video.

[@karlriley1314]

Chuck your drill up to the other end of the dowel and put it in reverse and pull the rest of the dowel thru the saw blade. Nice job I like these.

[@GRINwood]

Thanks for idea, i did it already, but the maximum diameter my drill chuck can hold is 13mm 🤔

[@HowIDoThingsDIY]

This is freaking sweet. You're a genius!

[@chyrochnik]

Не плохой вариант. Возьму на заметку. Спасибо.

[@bjoernbrasch2432]

Tolle Konstruktion. Danke für das Vid

[@abdullahalbudoor1391]

thanks for the free plans👍

[@majamagdamarcin]

Thanks a lot! Works perfectly 👌

[@MelodeusForever]

This is a Must have!!! Thanks

[@artemanuel8679]

Esto es sencillamente EXCELENTE, como bien dice otro usuario, este es quizás el Mejor, The Best método para hacer bolillos. Está será mi siguiente tarea. Gracias por compartir tan magnífica idea.

[@ПавелМакушин-х1о]

Я купаюсь кайф когда смотрю всё детали вточь, точь по размеру собрались..... Прости я перфекционист с рождения!!!! 👍👍👍💪💪🙏🙏

[@researchandbuild1751]

I really like yiu drill press chip collection that is nice

[@joebloggs7828]

What a clever design. Thank you very much for sharing this with us...

[@steadygan6004]

Steady. Gan

[@Raul28153]

I've seen a dozen or so of these diy dowel makers I even bought the lee valley one and sent the thing back. This is the best effort yet that I've seen the only real limitation on the surface finish is the blade and feed speed. Use a Non ferros metal blade ( one without those annoying devils ears) and your Finnish should be superb.

[@c.p.r.]

I have watched the evolution to this point. I'm very impressed with your perseverance and attention to detail. keep up the good work

[@MrZuzavincent]

Elon Musk of woodworking. Genius

[@chaplainand1]

Ingenious I'd say. Sweet.

[@TheNyhm1]

Very slick. Well done

[@raptors3164]

That is better than nice, its' outstanding. Thank you for sharing 👍👍👍👍👍

[@GRINwood]

Hi guys, now you can make calibrated dowels The idea of this jig i found here, just a little modified it: kzbin.info/www/bejne/jWLRZ3yIrdiNpdk&t All free plans I ever made are here: drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing GRINwood shop: www.etsy.com/shop/GRINwood Support GRINwood: PayPal: [e-mail] Thanks for watching

[@simonr6793]

Tried to download the plan's but each time I have tried it failed. Upon the screen it saying...unable to download the file..there was a problem with the network!!!. Any suggestions on getting around this problem??? 👍🇬🇧

[@jhart7304]

great idea. love my dovetail saw too. cheers 🍻

[@sashafedchenko343]

🤗😙🤗🤭🤭

[@dradjadsugiarto3318]

It was too brilian ideas, creator and works.But it was very difficult for me as an amateur in Wood working especially in available of Power Tools, Hand Tools,and Materials .I am a poor Tools..🤭👍Good Job Sir👍

[@gleinerteruel2488]

Man, you're a great professional! Thanks for share a very useful jig. I'd like to build a world only with dowels.

[@GRINwood]

🙂 Thank you, my friend!

[@MrBigMalT]

First time I’m watched one of your vids… absolutely brilliant. I’m going to make one of these!

[@smithsalifa]

Super like this jig. Thanks

[@Hambone571]

Very nice.Impressive idea.

[@ІванМосковчук-ь4ы]

Лайки за саму класну при способу 👍👍👍👍👍

[@jatendersingh8820]

Very good work 👍👍👍👍

[@oldoldpilgrim7898]

Is it better to run the wood in with the grain facing toward or away from the rotation of the blade?

[@yongyuthmeemuang]

Very good ❤️

[@kendodd8734]

Yeh great dowel maker alas I ain’t got a workshop like this with all that kit to help make em I’m just gonna have to keep buying mine from b and q but if u do have the workshop great way to form them

[@crappo8459]

Nicely done 😎

[@sebastiencaine9781]

Merci bcp pour la vidéo et le partage des plans!!!

[@janrutkowski8514]

Your videos are great. I really enjoy them so much. You are very creative and I admire and appreciate all the videos you make. You really are a master of woodworking. Thank you so much.

[@ronlafond5288]

Purely magical!

[@oscarvalenzuela262]

Excellent idea, thanks for sharing!!

[@mukundjoshi3366]

Very nice and simple design, excellent finish. This will be my next project :)!!

[@arturomora9807]

Good job my friend 👍😜

[@tonyfrancisco6739]

👍😊from France 🇫🇷

[@Liasshipman]

Good job

[@oeildemars]

Very brillant jig! Made out of nice solid oak and not some plywood which is a nice touch. Really like it and intend to give it a try, which is nice as you are providing free plan. And I mean, real free access plans, not a "give me your email and you'll receive them". Bravo! However, I've a question and didn't find the answer in the plans. Went trough a bit of comments, hoping I would find the answer but same same. You mention that the first hole should be bigger and of the size of the sticks. But what have been the "ratio" you applied for your dowels??? First hole being 1.5x bigger than the diameter of the final dowel? Something like that? I'd appreciate if you could get back to me and it might be useful for others too! Thanks Greetings from Vietnam!

[@rajendrawani5170]

Free PLANS GREAT SUPER ARTICLE

[@artangulo4550]

Efective simplicity

[@blancaesparza1701]

Desde argentina muy simple y práctico te felicito

[@ЄвгенКондратюк-э9у]

Да Вы просто ГЕНИЙ!

[@kentmerrill8925]

That is a cool device.

[@DetonadosRPGs]

Wow, ❤❤❤❤ this os awesome

[@Eric_Brachet_Tourneur_Sur_Bois]

Thank you for this vidéo, it’s excactly what i need for my customer 👍👍👍👍👍👍👍very easy, and simple technique

[@mr.ranyhomemade2466]

Awesome 👏 good idea made it

[@jpkatz1435]

OK, now what the heck am I supposed to do with all the dowles I just made?

[@Grizly_Atoms]

plug your hole

[@NonNone-qm4zi]

.... Got a wood stove??.. 😊

[@itsasinine3337]

Make a timber frame building

[@briancullen5183]

arrows

[@franciscolopezgarcia3540]

Calidad de idea p aser tarugos.gracias p compatir felisitaciones

[@kimjeppesen77]

Great Jig. 👍👌