🤜 S P I N D L E __ S A N D E R 🤛

This video is about oscillating spindle sander build from old car parts.
Time code:
00:05 base build
05:32 oscillating mechanism
16:29 legs and wheels
22:08 tilting mechanism
24:39 table top
30:41 sanding drums
33:24 review
Free PDF workbench plans:
drive.google.c...
More free plans I ever made:
drive.google.c...
Support GRINwood:
PayPal: [e-mail]
Thanks for watching and hope this video was helpful.
GRINwood shop:
www.etsy.com/s...
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music:
Parasail - Silent Partner
#woodworking #diy #GRINwoodtools .
Would you like to use my videos in your media projects?
Please contact me: [e-mail]

[@GRINwood]

I made this oscillating spindle sander from old car parts and soviet washing machine motor As always put "+" in the comments if you watched the video to the end - I will know that my work was not in vain👍 Time code: 00:05 base build 05:32 oscillating mechanism 16:29 legs and wheels 22:08 tilting mechanism 24:39 table top 30:41 sanding drums 33:24 review Thanks for watching Free workbench PDF plans: drive.google.com/file/d/1-KbTZ99F6z3vshXUf6iCo3YGpgVU-D90/view?usp=sharing Support GRINwood: PayPal: [e-mail]

[@DickvanZanten]

+ Inventive as ever! Hat's really smart use of existing parts. Where do you live? Soviet stuff is very hard to get here in the netherlands😉 I can only wish I could be as good at metalwork as you are. The ony way to get the big spindle to run smoother is by turning it straight on a lathe. That can be s simple construction like bolting it over an axle with bearings n both sides. Then sanding it round doesn't vibrate as much. Those vibrations give a larger movement at the top of the spindle than at the bottom. That's why you can't get them out with running it from a single sided bearing.

[@ТатьянаАнтонюк-з5й]

Ударниі інструменти

[@АлександрНуждин-щ3ч]

Бь? Ътьтю то ТБ то тот ь б Ъ Ъ в Березовки Ъ нъъ от доброе Ъ Ъ отдоброе утродоброе

[@ВільнийУкраїнець-к5д]

Наждачку смолой забивает.

[@franciscolopezarriaga1221]

P

[@mvn128]

Даже если оставить в стороне само изделие. Восхищает профессионализм в самом видеоролике. Режиссура, ускоренные фрагменты повторяющихся операций, акцент замедлением на важных моментах, звукоряд. Просто наглядное пособие КАК нужно снимать видео, чтобы зритель просто не мог оторваться

[@sergeyguryn3876]

талантливый человек во всём талантлив...

[@igorgrif3454]

100 процентов согласен !!!

[@frederickwood9116]

Nice work. Thanks for sharing.

[@абырвалкабырвалк]

Только с вжухами лиханул слегка 😊

[@MrTestovTest]

Не знаю, зачем я это посмотрел - точно никогда не повторю. Но не мог оторваться от видео. Суперкласс!!!

[@tomascastro6197]

👍BELLIMO.

[@keith_hudson]

This dude is freaking remarkable. Seriously one of the most gifted people I've come across on KZbin.

[@Fernandoalvarez-i1m]

Es un placer verte trabajar, limpio, preciso en todo lo que haces, acabados perfectos, detalles en tus trabajos que siempre mejoran la que ya está hecho por otras personas. Genial. Enhorabuena.

[@tinycuisine6544]

I don't care what you build, I will always watch your videos It's such a pleasure to see you work.

[@jentom6565]

Awesome book that gives you step-by-step photos kzbin.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!

[@СташенкоСергей]

Почти до конца ролика, не мог понять, что это будет. Получилось красиво!

[@marcogentili9776]

Ho guardato il video fino alla fine perché ero curioso di vedere, dopo tanti tagli e misure fatte con estrema cura, che tipo di macchinario fosse uscito fuori. Davvero tanti complimenti

[@ОлегФедин-ю6щ]

Приятно смотреть, когда работает мастер своего дела и занимается любимым делом.

[@ЮрийМалков-у4м]

Вот Вы заморочились! Пусть служит долго и радует надёжностью и удобством!

[@VladimirKajarda]

Гут, сказал бадзёра немец...

[@ДмитрийБурдуков-л8й]

Отличная работа!👍получился классный станок, все материалы доступны, Браво вам мастер, инженер-конструктор 👍👍👍👏👏🤝

[@valeryshebaldenkov9326]

Особенно станки и инструменты с помощью которых сделан этот станок...

[@billi10a]

Стараюсь не смотреть Ваши ролики, Шайтера, Адвоката Егорова по утрам, перед работой, во время завтрака, обязательно всё остынет и на работу опоздаешь!

[@kiankian1588]

Absolutely mesmerizing. If I found a motor that has a cover, I'm afraid to even think about taking the cover off, to make an oscillating sander comprised of old parts and a mixture of wood and metal, hats off to you sir.++++++++++++++++×+++

[@ВадимВадим-д2о]

Поражает наличие всякого инструмента. Аж жаба душит. А мастер красава! Долгих творческих лет.

[@ralfkramden9291]

Every time I watch your videos, I think you can't out-do yourself, then you prove me wrong. Great build!

[@northerndarklight5305]

Brilliant. Quality work. Wood. Metal. Welding. Electrical. Mechanical. CNC. Design conception and esthetics. It's all in the details. You sir are an excellent engineer.

[@garymucher4082]

Nicely designed and manufactured. The reason the large diameter is vibrating is because your only attachment is below the table. So any irregularities will be amplified. Other than making the support shaft solid and balanced perfect, you will just have to deal with it... Thumbs Up! My Grizzly spindle sander has the motor shaft (armature) extend all the way up to the top of every diameter spindle setup. So that helps control the vibrations of any of the diameter spindles installed.

[@Lwimmermastermetalart]

My suggestion would be to make your arbor for the larger drum a larger diameter. That’s a pretty thin piece of tubing you used. Try something bigger diameter and after you have put on all the wood pieces you could try to static balance the spindle. I believe that would solve all of your wobble. Remember weebles wobble but don’t fall down 😂😂. Seriously I think you should try it. Otherwise I’m very impressed! I’ve been a toolmaker for 50 + years and find your skills to be awesome! I really like how you made the video too 🤙🏻🤙🏻. Well done young man.

[@everythingtv1910]

Thank you for bringing this video to watch. I watch to the end . I read all comments .its interesting. Thank you

[@manuelurdaneta8649]

Very, very complex work to make a sander that can be purchased for a reasonable cost . I enjoy the construction

[@hessainaied9039]

ايه الجمال العبقرية والهندسة دي ياسلام ياسلام عليك والله انت مهندس عظيم وممتاز وفوق الممتاز

[@АндрейШаров-в1я]

Все у тебя чисто, аккуратно. Работаешь ты прилежно.приятно смотреть. Определенно Лайк. По другому не могу.

[@bestwhiskymac]

Уникальное изделие, многофункциональное... Особенно возможность придания широкого диапазона необходимого угла наклона с регуляцией скорости возвратно-поступательных движений. Большим дополнительным плюсом возможность выбора разнообразия типов и размеров насадок. Плюс лёгкая вибрация всего устройства. Безусловно пять с плюсом!

[@ВасильН-м3к]

Молодець! Гідний проек. Приємно дивитись твої відео, багато чого в тебе можна повчитися. Стрімкий розвиток твого каналу. Здоров'я, і всім нам миру.

[@GRINwood]

Дякую!

[@АнатолийСитников-н8ш]

Очень благодарен за идею создания шпинделя для шлифовки. Решил повторить ваше изделие, но у меня есть двигатель с длинным валом на двигателе. Купить дорого, я на пенсии. А сделать самому себе будет приятно,тем более что всё есть, и покупать ничего не надо. Спасибо вам и удачных новых поделок.❤❤❤❤

[@arturlend2297]

No Panie, elegancko to żeś wymyślił i wykonał. Brawo Ty 😎

[@zahracadda3943]

10:35

[@zahracadda3943]

😅ح

[@zahracadda3943]

نع

[@amana8528]

Идеально, качество сборки на высшем уровне. Работать будет долго. 👍

[@carloshernansalgado2581]

Podría patentarlas y sacarlas al comercio. Sería de gran ayuda para los que trabajamos la madera. Sencillamente espectacular

[@MrZeedine]

I thought my work was good ,but looking at your standard i think better i learn to bake bread instead. My workshop here in Thailand is messy when i look at yours. Thank you. most enjoyable. From an old English guy who is 86 years old.

[@АкрамджонМирзоев]

Пятёрка за испольнение. Мородец, желаю дальнейщих творческих успехов.

[@alanr745]

Very nice! The vibration with the larger spindle most likely has to do with the laminated plywood circles having some inconsistencies in the layers (voids, denser wood in some places, etc.) creating the vibration when spun. If you have any MDF laying around, that might make for a more balance material for the larger spindle.

[@luisenriquetorres5962]

Pp 1qpqp

[@jujcman]

I think if you take inox screw or hard steel (long screw ) it maybe more stable the long screw in your machine is very week she have durability 6-8 you must take inox or steel who have durability 11 and up

[@landhopper]

First of all, nice job! You can clearly see from the video the big one is spinning out of center. Most lickely due to unbalance and long but thin spindle axle. No (wood) lathe around? A way around it is to make a "brace" for the spindle with a bearing to stabelize the spindle and then sand it with your blok to make it more consistent. After tbat you can balance the big one on the axle! This should take care of most or all of the vibration. Hope this helps

[@АндрейДмитренко-л8т]

Не учи учёного

[@ianvicedomini2648]

This is beyond amazing, To have the knowledge you have to build something like this makes me terribly jealous to say the least. Building your own is far better than a lot of the ones on the market and the beauty is it's all to your own specifications too. Awesome work and fantastic video mate 👌 👏 👍🏽+

[@d__dunbar9123]

Love your work, and this one did not disappoint!! Fantastic Job!!! That satisfying grin you make when you see it worked was classic!! Thanks for keeping that clip in there when editing the video!! You rock my friend!!!

[@megavolt0674]

С самого начала думал, оно, не оно ? И таки да, дилдо. Женское счастье. Шутка конечно. Мастер красавчик.

[@luisguitierrez-yg4jz]

Tu trabajo es extraordinario, todos los detalles resueltos con sumo cuidado, el resultado final, un trabajo con excelencia y una máquina para años. Gracias, te sigo. Saludos desde Costa Rica.

[@raulsoto2088]

Un placer poder ver tus trabajos, tus videos... Un capo, siempre, gracias, un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱

[@djondou1597]

Хорошо, когда руки прямые и голова светлая. 👍

[@Alatinu]

¡ Gracias por Enseñar , por tanta Belleza, Funcional y Estética. Y la Creatividad de un genio !. ¡ Felicitaciones , Salud para Usted y los suyos !

[@karlknatter1462]

Sehr Professionell gearbeitet. Und auch das Video so aufgebaut das es zum Ansehen anspricht.

[@abdullahali5039]

Hi The work is amazing, very wonderful, in the full sense of the word, well done, and totally worth watching Greetings to you and I wish you success and further progress Abdullah from the State of Kuwait

[@ДодикВальцман]

Молодец. Мастер. Золотые руки.

[@pedrorodriguez7786]

Mire sr cuando yo compre esas herramientas entonces me pongo a hacer esa lijadora, lo felicito x su trabajo tiene mucho ingenio

[@tinkersdug1969]

Your skill level is jaw dropping for such a young man !!!

[@naderakhzari7969]

Hello, dear teacher, very beautiful and excellent service in the world, very delicate and accurate, and of course, very solid and practical. It can't be better than this.

[@IZSIBIRIYA77]

Случайно наткнулся на этот станок, лайк однозначно! Как раз у меня стойки есть от авто для этой поделки. Ибо цена зашкаливает всё разумные пределы.

[@Alex_Zakharoff]

Это ж сколько мыслей в голове....а главное, прекрасная нейронная связь их с руками....👍

[@планетасмеха-д5щ]

Лучшее, что я видел за последнее время.

[@АлександрШвецов-в9я]

Отличная идея и прекрасное исполнение!

[@fatroberto3012]

A few great ideas in this. The routing jigs for the lap joints is something blindingly obvious that I've never thought of! A bit late now but it might be better to level off your big spindle by mounting it between canters on a lathe.

[@seriy-y8y]

Смотреть можно долго как все получается легко, мастер своего дела. Вёрстке класс!

[@robertsteele5976]

Very very nice. I watched a video while back where another guy built his own all terrain vehicle, literally from idea to driving it. I like that you took some old car parts/wash machine to make this Oscillating Spindle Sander, let along one would have had to understand and have knowledge that parts you used could be converted for another purpose. Great Job Sir! You done well🙂

[@tinom.2455]

Hi Gregory, very Impressive! I realy would to start to rebuild it immediatly, but unfortuately, I dont have enough space in my little workshop. For the wobbly spindle, I think: Threaded rods are mostly not exactly straight and the weight on the end of the spindle (the added wood) let the tiny wobble of the rod rock up tho this shaking. Also the wood could be not exact ballanced. I had this Problem with a homemade disc-sander. The disk was made of Plywood and was shaking too. the only solution with this problem was to make the disk from a more uniform material. I took MDF, and the shaking was done... EDIT: Also if the Pipe is'nt cut EXACTLY 90°, then this could also result in this wobble... Keep going...

[@GRINwood]

Hello, thank you for your comment. Yes, I checked the big sanding drum and it's totally unbalanced plus it's not perfectly round. First I will try to fix the geometry on the lathe, if not helps - will have to change the plywood to more uniform material as you said. Thanks

[@suparmahadiaji583]

Luar biasa ... Karena dinamo dan sok bekas... Seluruh kemampuan tehnik dan peralatan lengkap dan bagus... Jadi lah hasil karya...

[@MamontMan]

Сделано профессионально.. Респект и уважение✋

[@fabriciohernandezlopez849]

BUEN DIA.....K HERMOSA MAQUINA A CONSTRUIDO UD.....DE VERDAD K ME A DEJAO IMPRESIONADO.....MUCHAS FELICIDADES.......GRACIAS POR SUS VIDEOS.....BENDICIONES......REYNOSA

[@thecaptfun]

While your craftsmanship is outstanding. And I do enjoy the build. I bought one at harbor freight 20 yrs ago. For less than US$100. It is a good tool. And oscillating beltsander may be next

[@johnmcdonald9977]

A very enjoyable watch! I agree that the vibration has to do with the discs, but it could also be that the spindle is not seated deeply enough! Thank you!

[@johnnyvangreune780]

Awesome work quality and precision. Thank you

[@fredvelez1964]

+ Great job my friend. Thank you for making this video. The bigger diameter sander spindle vibrates because it needs to run much more concentric. Set up a square on the table top close to the spindle and turn it until you find the high and low spots, then lightly tap the top end of the spindle to true it up. The closer you get it run concentric, the lesser the vibration you will get. Once again, thank you for the video. You did a fantastic job.

[@jeanjacquesmaillet1258]

très beau travail, pour un petit service. Mais seul le plaisir de fabriquer cette machine compte.

[@davidwacker1925]

very nice design and as far as the vibration goes, maybe a bushing to center the all thread inside of the tubing. I'll ask my wife, she know everything ;-)

[@Andrushka76]

Полезная штука в мастерской, спасибо за видео!

[@user-daniyal_nazyrov]

Какая прекрасная,достойная уважения работа! Смотрел с удовольствием и скачал видео для себя,как удачное решение в плане станкостроения. Успехов в Вашей работе!

[@VORONM]

Высший пилотаж! Аплодирую стоя!!! 👏

[@juanignaciocaino]

great idea! and flawless, no-nonsense execution. The vibration it's due (most likely) to the coupling and using a threaded laminated rod for the extension of the motor spindle. Maybe use a turned 1 piece shaft that has a register taper on the table side so it centers the drums, and has a counterbore for assuring better concentricity at the motor end.

[@paulbignell6977]

yet again another worthwhile video to watch

[@andrej.babichev]

Звлипательеое видео. Очень много разных полезных штучек применялось)

[@woodywood1951]

splendid! maybe the best DIY spindle sander I ever saw

[@dougthomson5544]

Great job, well done. I know I am in a minority and I understand multilingual audiences, but I still like talking in my videos.

[@СебастианПерейро-ш4х]

Хорошо мастер, браво! Поклон и уважение.

[@VladimirKajarda]

А-то... о-го-го...

[@ryoung6730]

all i can say is wow, I build most of my own shop tools to save money, but after watching the buildmi would have to say the harbour fright 179 dollar two shaft spindle sander with base looks awfully tempting, it has a small diameter and larger two inch snding drums and comes with two bags of different grit replacemnt sanding tubes and i cant see doing this build which i estimate would take in excess of twenty man hrs and about 300 us dollars in hardware to build, you may have a superior unit , but you paid well for it ,. keep up the good work.

[@ВладимирЕремеев-с9й]

Мастер детективного жанра😊😊😊 Very, very nice!!!

[@danalexandroaie3233]

Very nice job. Regarding on how to eliminate those vibrations. First turn the wooden circles until they rotate perfectly around the spindle. Then glue the sandpaper and repeat the finishing operation. Also check of that spindle is perfectly straight. If not, use another one.

[@АнтонОвич-у1л]

Оппа, побачив, що вимкнулось світло - думаю, певно, Автор наш, українець... Заглянув "Про канал" - так і є! Ну, хто б сумнівався. Удачі Вам, Майстре і миру!

[@Stevon2012]

+ Awesome video, you are a great engineer! The large spindle is made from plywood. Plywood can have voids in it that you can't see. Make it from a solid piece of oak, or stacks of oak pieces, then shape it down. Just a thought. Keep up the great work!

[@andifich1]

Absolutely amazing 👍🏻 Thanks for this Video

[@alfhenrykwulf3387]

Very well done!! It is a wonderful construction. You asked about why the big drum vibrates. I think you need to center it more precisely as the geometrical moment of inertia is much larger as with the small drum. I suggest making a conus shaped nut for the top which will center the drum nicely.

[@aucomint]

Either the cylinder is not balanced or it's not tightened enough on the motor

[@JohnSmith-ud9ex]

Another beautiful build ! Hopes that you and your family are keeping safe and well in these troubled times. = )

[@michaelnovak9766]

Very neat work. In regards to vibration issues. In your shoes I would seriously consider ... Fitting a support guide for that long spindle in the spindle drive box Or I would consider a composite material like nerathene used for bushing with a metal sleeve. It might be better to simply get a suitable sleeve quide made up at a engineering shop. And as another guy said earlier... Try MDF board. But ...do yourself a favor....mill it on a wood lave. Hope this helps 🙂

[@captainmort]

GRINwood, all I can say is WOW.👌

[@tuncerulay7950]

This is a great working . There is innovation, planning and practice. Congratulations.

[@viktorviktor4718]

Майстру RESPECT! 🤝👍👏👏👏🇺🇦

[@IvanSergeevicsh]

Чтобы не было вибраций, надо переходник и шпильку заменить на единую деталь, желательно с напуском на шпиндель (там конус небольшой к месту). Ну и шлифовальные валики сделать на более толстостенной трубе.

[@IvanSergeevicsh]

И еще, для корректности конструктива, скорее всего придется добавлять третий подшипник.

[@cbcarper9681]

Excellent excellent excellent

[@tokayfeyzioglu3235]

Bravo. Ellerin dert görmesin.

[@cabman86]

The vibration could be different densities in the stack of the wood pieces. Or there could be a slight bend in the pipe.

[@allanadams9214]

You’re a genius

[@MCsCreations]

That's just brilliant, Gregory! Fantastic work!!! 😃 Stay safe there with your family! 🖖😊

[@ЛеонідХмілянчишин]

_Відео проковтнув на одному диханні. Як завжди: без води, чітко, лаконічно, зрозуміло, доступно. І пі-пі теж є 🙂.. ну а як же без них. Лише одне запитання, а хід шпинделя не замалий, десь на око 80мм, бо не задіяна верхня частина? Хоча це можна змінити більшою шайбою. Здоров'я і най Бог помогає.

[@JEYD220699]

Excellent work! You can try a solid shaft instead of the aluminium tube for the big spindle. I think it will solve the vibration issue.

[@aldoonoratoberetta2751]

Il genio umano non ha limiti. Bravo

[@norbertgallice168]

Super présentation pour une super ponceuse maison ! Bravo et merci du partage....Amitiés de France

[@dariushmilani6760]

It is always a pleasure to watch your videos.👍👍

[@acerjuglans383]

ANOTHER amazing build! + Always impressed, over here in Canada. Stay safe over there.

[@tierradecampeones1968]

Muchas gracias por todo el conocimiento que compartes. Bendiciones.

[@LightDreamsAussies]

Wow…very nice…an absolutely great job 👍🏻. Thanks a lot for this inspiration and solution 🙏🙏🙏.

[@юриймордовский]

С удовольствием вместе поработал! Благодарю!

[@jastrexach6466]

Молодец даже очень классно, лайк и подписка!!! 👍👍👍

[@luiscarlossuarezmarquez264]

Great, great & great ‼️👏👏👏

[@theidlehandsworkshop3884]

+ love the design and the way you showed the build, makes it easier for someone else to replicate. Thanks for sharing your time and knowledge !!!

[@henridelas718]

voila un gars qui est indéniablement un très bon menuisier et aussi un bon ouvrier et inventeur toutefois je met des réserves si moi je désire fabriquer le même appareil impossible il ne donne aucune explications à priori il est content de lui et dans son coin les autres tant pis pour vous le matériel qu'il utilise nous n'en saurons pas plus , dommage.