(Grom clone) emissions removal and stock carb must do mods

[@CrV_Jr]

Can you do this without changing the carb? I want to change the carb out eventually but can I do the evap delete while keeping the stock carb

[@Fuzzerk]

Kinda weird but I just bought a venom x20. I took out the air box. And the pz20 carb. BUT I don’t have that little emissions bracket connected to the carb, or that EGR connection. I do have the canister. Ive looked all over the motor and I can’t find that emission/egr piece. Bought it a month ago. The title says it’s a 2023.

[@AryDueñas-n8m]

Were you able to find out where it was?

[@Fuzzerk]

@@AryDueñas-n8mNo lol. I guess I received a version of the x20 without that. Or maybe 2023 and up they’re not including that? I emailed Venom but they had no idea what was referring to lol. I successfully was able to install a Nibbi PE 26 on my x20. Still runs

[@CentralAerospace]

​@@FuzzerkI got a X20 a couple of weeks ago and was wanting to do an emissions delete too, only thing was that I heard some people had some oil leaks after doing it. Any oil leaks on yours after removing the can?

[@itztsuki4807]

Honestly I just got a venom x20 and I had a oil leak before I changed the carb and did the delete and ever since I haven’t got any leaks only problem I got is trying to go past 46 miles

[@lightwork6816]

Ok so I have been trying to find the EGR block off I can’t find the right size anywhere I looked on eBay and on Amazon they are all way to big

[@EnviousRepairPerformance]

Get a pair of dikes or pliers and just pinch the tube

[@EnviousRepairPerformance]

Or cut and weld

[@EnviousRepairPerformance]

gy6racing.com/universal-egr-block-off-plate-for-50cc-qmb139-150cc-gy6-scooters/

[@lightwork6816]

Perfect thank you for the response I got it ordered 👍

[@EnviousRepairPerformance]

No problem

[@munizana31]

What is that hanging thing call with the 2 tubes? Thats the only thing my bike is missing😩

[@EnviousRepairPerformance]

The emissions egr u don’t need that

[@munizana31]

@@EnviousRepairPerformance okay thank you!

[@EnviousRepairPerformance]

No problem

[@justheretoinspireyou5803]

Can I ge my bike registered without that in cali?

[@EnviousRepairPerformance]

Yeah they don’t check any of it

[@justheretoinspireyou5803]

@@EnviousRepairPerformance where in cali are you ? I have a gas leak under the tank of my Vader do you think you could fix it ,

[@EnviousRepairPerformance]

I’m central cal 209 area

[@justheretoinspireyou5803]

@@EnviousRepairPerformance oh Stockton

[@EnviousRepairPerformance]

@@justheretoinspireyou5803 about a hour south of stockton

[@bradleypersefield6709]

Please tell me a good choice of carb for this bike I'm gonna do a delete of all the emissions stuff

[@EnviousRepairPerformance]

I run either a pz26 plastic choke if I’m going to do other mods or a pz22 plastic choke no cable chokes either carb is on Amazon for 20-30 bucks plus the manifold is 8-10 bucks

[@Illness.og.]

@@EnviousRepairPerformance link

[@RABIES63]

How do I go about getting one of these plated?

[@EnviousRepairPerformance]

Depends what state you live in and they come with a certificate of origin and u take that to ur registration office and do whatever they need or require or just buy it somewhere local we’re u can have them reg it

[@RABIES63]

I stay in Santa Cruz just got my bike I guess just take it into the DMV is that what you're referring to as a registration office? My bad just trying to get my ducks in a row

[@EnviousRepairPerformance]

Yes we’re did u buy the bike from ?

[@shanerisley8455]

Hey bro love the video thanks for the info. Do you know how to reset the ecu? I know on the grom it’s the blue and green wire but on the clone it doesn’t work and I don’t get any engine light. Can you help please? Thanks man

[@EnviousRepairPerformance]

Clones don’t have a ecu becuase they are not fuel injected

[@drxcolxvded460]

My bike stalls when i put it into gear. This problem just started today not really sure whats the cause but i have a icebear fuerza. Will the emission delete work with the stock carb?

[@EnviousRepairPerformance]

Yes it does still work but your bike if it’s stalling when u put in gear it needs a clutch adjustment

[@drxcolxvded460]

@@EnviousRepairPerformance thats what i was thinking. It idles fine in neutral but at first it’d stall instantly and jerk when put into 1st. I looked up some stuff then went and tried again and it would stall after i’ve came to a stop and stayed in 1st with the clutch pulled in. It’d just bog down after a few seconds

[@EnviousRepairPerformance]

I would adjust the clutch then swap that carb out

[@Titoo2xx]

How do u get insurance on it?

[@EnviousRepairPerformance]

From my insurance company

[@neo1629]

Will it still pass inspection in ny if I do this?

[@EnviousRepairPerformance]

I don’t see why not nobody checks that stuff

[@rarihunnidzproductionz4069]

Is this the reason why my engine wants to cutoff on its own out of nowhere?

[@EnviousRepairPerformance]

Yes it is

[@rarihunnidzproductionz4069]

@@EnviousRepairPerformance thanks bro

[@rarihunnidzproductionz4069]

What size is the stock carburetor on this specific bike I plan on doing an aftermarket exhaust and carb. What size is the jets on this carb?

[@EnviousRepairPerformance]

The stock carb is a pz20 size 20mm intake the one I use is a pz26 carb

[@lukemassey5055]

What manifold do I need for a pz26 carb?

[@EnviousRepairPerformance]

140cc manifold

[@Gallaxyz]

great vid, what did you do with the tube from the gas tank?

[@EnviousRepairPerformance]

I let it vent straight to atmosphere

[@Gallaxyz]

@@EnviousRepairPerformance glooking

[@TanManFixes]

question bro with the 22 carb, what main jet and pilot are you going to run ? I'm at low elevation and hot weather. Also, are you going to upgrade the chain and sprocket, if so, do you know the chain size ? Thanks for any info ! Mine is shipping out soon !

[@EnviousRepairPerformance]

I use a gold series 428 chain 110 link with a 17 or 16 front sprocket

[@EnviousRepairPerformance]

Also I run a pz26 carb plastic choke they sell them on Amazon for 20-30 bucks u will need a manifold as well it’s like 8-10 bucks

[@EnviousRepairPerformance]

I live in California at sea level

[@Philip-qw3lu]

@@EnviousRepairPerformance you forgot jet sizes, I’m in calfornia at sea level as well but can’t get my jetting right

[@EnviousRepairPerformance]

With the carb I run I don’t have to jet it it runs perfect fine at sea level

[@uniqueanartist6792]

Man if your in LA I’ll pay you to do this for me. I don’t know how to do this.

[@EnviousRepairPerformance]

Not in la I’m about 5 hours north of there

[@jasonngo4100]

Hey, not trynna hijack anything but if you still need help, I’m in the la area and would be happy to help out, let me know!

[@masterpain7742]

@@jasonngo4100 can i get ur info? I'm in the south central area

[@stephenmikrut1879]

@@EnviousRepairPerformance Curious where that is. I just moved to the San Francisco(glen park area) and would love some help on these bikes.

[@EnviousRepairPerformance]

I’m a hour and a half south of you off i5

[@travisparisek1412]

Worth it to buy or just get a grom

[@EnviousRepairPerformance]

If your going to modify yes definitely worth it if your going to leave it stock then just the Grom because once u modified a clone for the price it’s still cheaper then a Grom and faster I have videos of both and the clones need a few small things then they are solid i abuse mine and no issues

[@travisparisek1412]

@@EnviousRepairPerformance thanks for the reply everyone has mixed answers on it thats why i asked you! Some say the bike is complete garbage then some love it! Ive read and read and have watched every video on both pretty much! I know the bolts need loctite and motor mount bolts are weak and a new carb is needed! Just dont want a pos if you know whst i mean! Thanks agai.

[@EnviousRepairPerformance]

Yes some are pos I’d get a boom Vader not the other ones the raptors suck More issues vibrate more if u watch my videos I take mine everywhere and against groms too

[@travisparisek1412]

@@EnviousRepairPerformance thank you kind sir ive been trying to decide which route to go

[@rolandtear6062]

Try tuning when engine is warm pull over on the side get that screw driver out get on your back take your time and adjust put some paint on one side of that screw driver so you can see which way you turn to smooth out that carb😅

[@EnviousRepairPerformance]

I’m a motorcycle tech I know how to run a motorcycle and fix them you must have not seen any of my other videos

[@rolandtear6062]

Now your ready for 17 front sprocket 110 link chain make sure the chain size matches the sprocket size wow wow smooth ride no high rev just the front and a nibbi 26mm carb😂😂

[@EnviousRepairPerformance]

Chain does match the sprocket ⚙️

[@EnviousRepairPerformance]

Chain does match the sprocket ⚙️

[@rolandtear6062]

No ECU on Grom clones they are not fuel-injected

[@EnviousRepairPerformance]

Exacty they are carb motor never said it was fuel injected I have tons of these bikes

[@juliosantana4664]

Take the blk bottle looking thing and take the big end off you will see its a filter and u got a filter to put the motor brether tube

[@EnviousRepairPerformance]

It don’t need that it just vents to atmosphere