GSM RELAY Control from Registered Number Call

[@muthumani81]

இவ்வளவு தெளிவாக யாராலும் சொல்லி கொடுக்க முடியுமா என்பது சந்தேகமே!!. அருமை சரவணன் அண்ணா... வாழ்த்துக்கள்... சரவணன் பொன் கணேஷ் எலெக்ட்ரானிக்ஸ், கோவில்பட்டி.

[@yupingliao4078]

This is a great project, which can achieve remote control, and can also be remotely controlled when going abroad. Thank you for sharing a very useful device

[@omerucansu2569]

Hi sir,You reduced it to around 3.4 volts for the Sim800L rx pin. Is the 5V from the Arduino a high volt for the rx pin?

[@mayankgupta155]

What if I want to update my phone number remotely?

[@dayanandkasle5469]

Can we use Nano for this application?

[@vipinvg2048]

Hi sir I have a doubt we can use attiny85 that place of aurdino uno

[@jameskuria1664]

You are awesome in teaching. Keep it up

[@aesthetic.drolll]

I'm not getting SMS after disconnected call..? may i know the reason.

[@amarsinghparihar7796]

I tried to contact you many times but no reply from you

[@mr.g1625]

Sim900a gsm module burned out after 1hour of working well. Which gsm module is better for industrial use?pls guide me anyone... Thanks

[@j4yce327]

Can i use 2200uf capacitor/25v?

[@MsSanjay31]

Sir jee, Who can use maltyrely what can I do

[@ezeoluchukwu5104]

the link for the code is not opening sir

[@manmangy]

Where did you get 2G Sim

[@aslamguddad8977]

Which type of sim card is supported to this module.......

[@manmangy]

What is the use of this project now. Will 2 G Work

[@kohtet7932]

Sir. Please SMS controlling video is shown for tracking and relay controlling. SIM800L

[@varunraj2392]

Hello sir , I'm getting " "as text message instead of text I'm send using CMGS command , is there any solution for it ?

[@pookoye]

ME TOO

[@yashwanth1738]

Can we get the code on link.

[@jagdishchauhan8683]

Sir, put a current sensor in it, which can be turned off due to overloading due to running any load on one state and we get the message reply.

[@jagannathkulkarni]

Thanks for the elaborated explanation and the code !

[@electricalworld3339]

The relay is on direct And at call the gsm cancel but no action

[@itzikovadia851]

The link for the code is not working

[@TheJanuszd]

Hello. How to add more phone numbers

[@chandrahasas5779]

Can u sell one .. want to buy it

[@camcam3388]

My friend, please, if you have a device code. servo motor control by sms thanks

[@michaelibinola4679]

what did you use to create the circuit diagram?

[@SimplySamu]

TP4056 Charger module over ah heat akuthu ena bro pannrathu

[@A1invites]

How to register multiple mobile number

[@ezeoluchukwu5104]

that is good one indeed. carry on and post the link to download the files

[@A1invites]

Hello, can anyone program code for me. I will pay for code

[@talebsalah139]

Bonjour le code arduino ne s'ouvre pas que je faire pour ouvrire merci

[@rawezhali491]

link broken please can you update it Thanks.

[@kitkirkyen2002]

Another subscriber here sir. I want to ask a question sir, on the void parse, where did you get the +8 and +21 sir? Thank you so much

[@SaravananAL]

check video @ 7:26 caller phone number is parsed out using substring function. Index plus 8th position is the starting position of caller number and we go up to 21 position to extract the caller number

[@manmangy]

Can you upload the same with 4G Sim

[@ohmbairava1309]

Where are we get this product ? Cost of the product ? Your contact number ? Pl clear my doubts unless this video is not useful for subscribers

[@thilinawijebandara3232]

Great work .Thank you so much

[@amirhusseinqolami3593]

Very Useful,thanks.

[@md.sazzad3079]

Resistor value

[@robinlefever8510]

very clever, thank you!

[@deepakpatidar5580]

Sir plz code in comment 😭😭

[@shakerileiwat4341]

Awesome ♥

[@electricalworld3339]

Really he is. Excellent and practical program But the problem is that when you connect for the first time, the relay works and unlocks And when you disconnect the network from the gsm And the connection again does not work and you must do a rest of the program from the Arduino, so what is the solution to this problem?

[@electricalworld3339]

Please tell me solution

[@electricalworld3339]

great program But there is a problem that when the network is disconnected from the GSM and then it returns, it needs to do a docked work from the Arduino in order to work because it remains at the last state it was in before disconnecting the network from it

[@Roshinii21]

Sir code link

[@rajendrapalan9519]

Excellent Interested in this project

[@abobobo943]

Very good job thank you Sir.

[@noweare1]

Excellent , thank you

[@umeshsankpale8179]

Please sir request to you please next vedio please show circuit diagram

[@umeshsankpale8179]

Very nice sir

[@ahmedtaher4015]

Good Code pls

[@SkEngineers-po7qb]

SUPER SIR

[@naimoctal]

great work

[@renas9754]

Thank you so much sir

[@digitalmachine0101]

Good information

[@cedztechph391]

Thanks

[@explorerofeverything1806]

Tanks sir and I produ to you your a india and Bangalore

[@davelodia9157]

sir how i can download the code?

[@j4yce327]

Can i use 2200uf capacitor/25v?