GSpeed Traxxas TRX 6X6 LCG competition build

Showcasing my friends epic 6x6 build!
Build List:
-GSpeed 6x6 chassis, lay down servo mount
-IERC bumper and sliders
-Traxxas TRX6 locked axles
-Traxxas overdrive front
-Vanquish trans with dig
-Holmes Magnum Stubby
-Traxxas big bores
-Losi minit -T
-Treal wheels
-Proline Krawlers
-Samix links
-Powerhobby servos
-Hobbyywing 1080
-MST J45C Cab with Unimog bed
Follow Paul on instagram: @ekpaulyrc
Thank you for the support! Happy Building!!

[@knotical689]

Very very cool. I'm in the planning stages for a custom 6x6 build and this was a huge help. Time to start ordering some parts

[@mickd8188]

By far the best custom 6x6 body I've seen... very cool. Cheers mate 👍

[@xm3ntal620]

What a monster. I need this!

[@xm3ntal620]

Is there a build sheet anywhere?

[@KevinRCMan]

Very impressive build. Makes me want to build a 6x6, that rig went anywhere.

[@henrysrcgarage5210]

Awesome GSpeed 6x6!!

[@danielsonhobbies]

Thank you!!

[@RC-CARS-WORLD]

That truck looks awesome, great job, well done 👍😃💪

[@danielsonhobbies]

Thank you🙏

[@chuckbareika5478]

Awesome body getting ready to put a 2 speed in my axial 6x6

[@danielsonhobbies]

Heck yea! Let us know when your done!🤙

[@Braindog]

Awesome Builds... u inspired me^^

[@RCPropaganda]

Asome build. I am doing research now because I just won a chassis in a raffle and I really want to do a portal axles build for sure.

[@danielsonhobbies]

Thanks! Glad it help. See you at Scale Mt🤙

[@bobaque70]

Nice build, gave a sub!

[@danielsonhobbies]

Thanks for the support!!

[@jasonbyrd5150]

Bad ass!

[@samloveelvis]

Nice body work. my 6*6 carbon fiber build off trx6 axles is 7 pounds, scx trans with dig, HW axle 3300kv combo, SOA, titanium link set 😎

[@danielsonhobbies]

Sound sick! I will be sure to check it out when you are done🤙

[@caljader3388]

Nice rig, I like the body , it's a game changer for me cause I think the Mercedes body is kinda naff, lol!👻

[@viperracing2889]

What an insane rig. To use a russian expression: mji'needz'it!

[@danielsonhobbies]

Спасибо! 😄🤙

[@chalinp4886]

Nice project where did you get the orange willys body

[@danielsonhobbies]

Thanks. My friend @ekpaulyrc did an awesome job on that build! The front cab is actually a MST J45c Toyota Landcrusier cab and Unimog bed. Hope this helps🤙

[@wilsoncuellar6237]

Amazing. What cst shock oil weight are you using?

[@danielsonhobbies]

I cant remember but will have to ask him later. I think he is using 40wt.

[@manchi69]

Cool rigs, where can I get an FJ 6x6 body?

[@danielsonhobbies]

Thank you! This body is made up from a MST J45C cab with a Axial Unimog bed. Hope that helps🤙

[@triplesrc3118]

I want to build a Gspeed 6x6. They look bad ass

[@danielsonhobbies]

You should build one. The 6x6 is moving to the top of my build list. With the DIG function and extra axels, I am shocked at how well it performs for its size!

[@triplesrc3118]

I've been thinking about it. Gotta finish my c1 first. Maybe build a 6 wheel steer

[@danielsonhobbies]

Good idea finishing your c1 first since theres no 6x6 category yet. Did you figure out the panhard adjustment your cliffhanger?

[@triplesrc3118]

No I haven't. But I did pit the dual stage in my tires.lol if I get time tomorrow I'm going to see if loosing the link end a lil will help

[@danielsonhobbies]

😄. See ya Sat for the comp🤘

[@nsrc2870]

What panhard mount was used on this ? Also would the stock trx6 links work? And what pinion and spur gear r used. Sorry for questions. Seriously debating on building one of these

[@ekpauly]

The panhard and drag link are trx6, but the drag link is using a longer jato rod end. Links all depend on what body and wheelbase you need for your body. The trx6 links will work on the third axle for sure, but again depending on wheelbase. I used SCX10 links because the Gspeed skid is more similar to an scx10, the TRX skid is different. The overall wheelbase is very close to a TRX6, but the center wheelbase is shorter. The blue truck in this video uses TRX sport links to shorten the center wheelbase to fit the bed, and it actually crawls better, that’s why i built the Gspeed version. Hope this helps, its a difficult process if your trying to make 2 bodies fit together and build a chassis with the correct dimensions that looks good and perform. Edit: the pinion is 15t and the spur is 56t. I will probably change it to get a little slower startup speed. The hobbywing 1080 is killing it though.

[@nsrc2870]

@@ekpauly awesome buddy. I appreciate the response. Absolutely killer build. Hoping mine turns out half as good lol I may try and make that wb in between the front 2 axles shorter then.

[@nathanmcdonald6999]

Hey great build!! What length links did you go with in the back?

[@danielsonhobbies]

That was not my truck, but maybe my friend Paul will chime in if he remembers.

[@nathanmcdonald6999]

@@danielsonhobbies I hope he does! Thanks for the reply!

[@yiketoopet6186]

How to get the bodyshall like that?

[@danielsonhobbies]

Its a combination of two parts: body (MSTJ45C) and Axial Unimog truck bed.

[@yiketoopet6186]

thanks brother