Guinness draught cans in surger

sonic cleaner stout

[@rebmem007]

The applause at the end was perfect.

[@johnmcnally198]

I’ve tried two different cleaners now and it didn’t work

[@ericcuthbert5974]

Thanks for letting me know.👍

[@johnmcnally198]

I’ve tried this but it doesn’t work do you have to keep the Guinness in the fridge for a certain time

[@fuzzy1237]

Ideally 24 hours

[@ashmilburn7121]

Wonder if this would work with the Guinness original cans?,the non widget draught ones?

[@michaelw8785]

This actually blew my mind

[@countcockulasbride]

What machine did you use

[@lexingtonlad5745]

You wasted so much Guinness right at the start.

[@adamzworld]

Can I ask please how long you leave it for once you've pierced the can before opening and pouring?

[@anthonymccormack2979]

30 seconds should do it.

[@adamzworld]

@@anthonymccormack2979 thanks very much. Tried tonight with my recently purchased ultrasonic cleaner and worked a treat!

[@adamzworld]

@Kyle Byrne I haven't tried it with the nitrosurge cans yet, but have tried it with the regular surger cans and I don't think there's a big difference in taste. The surger cans do seem to retain their head once poured slightly better though.

[@PHFH]

@Kyle Byrne have you tried using the new nitrosurge cans with a jewellery cleaner?

[@wewouldneversellourclubfor3166]

@@anthonymccormack2979 What is the name of the surging machine that you have.

[@johnmccarthy9911]

Deadly 👍

[@ericcuthbert5974]

Can it be done on the 00 Guinness please ?.

[@anthonymccormack2979]

Yes it does, again a small hole to get the gas out first, same as the video.

[@countcockulasbride]

How does it taste? And where did you get the machine ? Thanks

[@anthonymccormack2979]

It should work with any cleaner. It's a huge difference to the taste from the regular can.

[@countcockulasbride]

@@anthonymccormack2979 finding it so so hard to open the can without activating the widget

[@anthonymccormack2979]

@@countcockulasbride I use a drawing pin, not a thumb tac the one with the small plastic handle and pop the can just behind the ring pull. You might hear the widget go but if it's done slowly enough it won't surge in the can.

[@countcockulasbride]

@@anthonymccormack2979 you are an absolute legend! Did it today with the drawing pin and works an absolute charm. Cheers to you my friend.

[@anthonymccormack2979]

@@countcockulasbride only too happy to help😂😂

[@ericoppel5698]

I tried it using a very similar looking ultrasonic cleaner and it did nothing! :-(

[@anthonymccormack2979]

Maybe the hole was to big? Very lightly pop the can, and pour very easily so it looks like flat coke, then try. Also the can must be chilled.

[@johnmcnally198]

Same hear did you find out why