4L60E Power Flow (1st, 2nd, 3rd, & 4th Gear) (Automatic transmission power flow)

[@SouthpawAutoworks]

Thank you for being here! If it feels right to you, help me spread the word about this channel… 1 Handed Transmission Rebuilder (60 sec): kzbin.info/www/bejne/kIKrpaWMe7p7ms0

[@janetmichellehumphres3339]

Great job

[@michaelthul6013]

This is the first video of yours that I have watched . I am impressed . I have always thought that the automatic transmission was the most complex and interesting part of an automobile . Therefore with the help of KZbin , I have been watching and learning the subject . The explanations that you are giving are what I have been looking for . Thank you for taking the time to do this . I will be watching your videos multiple times so I can get a good understanding on how these things work .

[@SouthpawAutoworks]

Right on! Welcome aboard! I'm currently working on a video that shows how the operation the 1-2 shift valve + solenoid. It shows oil flow throughout the applicable parts of the trans, valve movement, etc. Hoping to have it done today... Here's a 60-second preview of my latest project. 4L60E AFL Valve: kzbin.info/www/bejne/r5e7latsdtCkoLc Thanks for dropping me a line! PS - If it feels right to you, please help me spread the word about this channel. 1 Handed Transmission Rebuilder: (60-Sec Preview) kzbin.info/www/bejne/r2S5mquXlKqWZ6c

[@justinArk-Box]

Still seems complex but what a great breakdown

[@FourSeasonsNorth4x4]

Basically ditto. He said what I wanted to say…I’m gonna stick with this so the ‘automatic transmission’ is no longer a mystery or some voodoo magic between the engine and the transfer case(in my situation) or drive shaft for many. Many thanks for this and I wish your channel well. 👏👏 👍👍

[@SouthpawAutoworks]

I've got plans to simplify these topics even more. Bite-sized... Thanks for your comment, Justin.

[@SouthpawAutoworks]

Appreciate you taking the time to drop me a line, Four Seasons.

[@frankensteinrules6511]

You are a very good instructor. Even a 70 year old like me can understand. Thanks for your videos, keep um coming.

[@SouthpawAutoworks]

Doing my best. Thanks for dropping me a line! Much appreciated.

[@carshopper-sr1uq]

I have built a few 4l60e That was the best description I have ever watched great video. :-)

[@SouthpawAutoworks]

Right on! It's a fun transmission to build. Thanks for dropping me a line! PS If you're interested in spreading the word about this channel...here's an easy way to share with friends, family, FB groups, automotive forums, etc. (Roughly 60-second video) 1 Handed Transmission Rebuilder: kzbin.info/www/bejne/g6fZZnaaZ8iJjZY

[@80fiatfreak]

Excellent video series. I appreciate your teaching style and am absolutely amazed at your ability to present things in a sensible and easily understood way (and one handed, no less!) You have inspired me to attempt a transmission repair on my 4L65E, it lost 2nd and 4th gears but i still have reverse. I'm going to attempt replacing the band to see if I can get away with a cheap fix to get a few more miles out of it. Thank you for the instructional and informative video

[@coleknight7529]

This reaffirms my attitude toward machines, that nothing is really that complex. Only well timed and precisely machined. Awesome video

[@joshuaharvey5671]

Great video, 👍 do you have any videos on upgrading 4l60e or videos on transfer cases used with 4l60e and upgrades thanks ill continue watching

[@SouthpawAutoworks]

Currently we do not have any videos covering 4L60E upgrades. However, that's definitely on the to-do list! We're gonna be putting together a T-case video, before too long. Unfortunately, it's not one that's compatible with the 4L60E. But, we will get to doing other T-cases, in good time. Thanks for dropping me a line!

[@voidisyinyangvoidisyinyang885]

I've watched probably a dozen 4l60e vids in the past several days and this is the ONLY vid that truly explains how the gears work. Very fascinating and very clear. I'm getting a rebuilt 4l60e done tomorrow. I'll watch your other 4l60e vids now. Thanks for the great instruction.

[@SouthpawAutoworks]

Thank you for the feedback. That's great news. You're very welcome. Thanks for dropping me a line!

[@voidisyinyangvoidisyinyang885]

@@SouthpawAutoworks 1 year later - put 15K on the Reman Trans 4L60e. I'm planning to install a magnefine external filter soon. I did a fill tube "flush" 1 quart out/1 quart in after some gear shifting engine running - so mathematically I think that is 75% new fluid now. The engine seems to run smoother now and the 15K ATF had a slight burnt smell to it! I didn't see any metal though but since a TSB was sent out to add a 2nd magnet - I figure an actually Inline filter-magnet would be better. Any comments - planning on just removing the front cooler return line section and then using brass quick connectors with the e-clips for a flexible transmission hose connecting to and from the filter - resting on that splash guard.

[@PullStartStables]

I have had many transmissions apart and replaced many parts. I’ve never understood how it all works, but it always does! Thank you for this info!

[@FilterYT]

It is one of the coolest inventions, fascinating. Thanks!

[@SouthpawAutoworks]

No doubt! You bet.

[@mattsolis4142]

Dude you are awesome! Want to say thank you ! For expanding my knowledge. GOD BLESS YOU !

[@BrentA-e1c]

Awesome video. I have Hummer H3 with this trans. Rebuilt at 165K about 2.5 yrs ago. 2 weeks ago while in reverse unit will at times lock up as in stops moving in reverse. Push shifter into neutral and feels like still engaged in forward giving a little gas unit feels like lurching forward. Go to park and back to reverse sometimes it backs normally and others I have to shift to neutral, then to park, then to reverse and seems ok. Ish. Leary of taking it back to original shop. I'm thinking valve body issue, dropping pressure to reverse clutches. Temp not a factor as same hot or cold. Fluid at correct level and clean. Any thoughts you may have would be greatly appreciated. Thanks Brent

[@kennynvake4hve584]

Maybe here I can get a long time question answered...Should I change my trany oil..I have a Chevy S10, year 2000, 4 cyl, with 240,000 miles on it...I have no idea of the history, just the oil is VERY brown, but to me dont smell burnt...Change it or not?

[@ThomasJBurke]

Robert Question, On a 2009 Silverado will the TCM mess with the 3rd gear not working the way it should?

[@GavinSwalley]

Hey I’m having issue with a rebuild. And. Has a code p0741

[@MorganOliff]

Wow, Expertly taught from someone who clearly has a grasp of everything going on inside these machines! Much less intimidating after watching this.

[@cockasorrus7475]

Hey Rob you sure have a great way of explaining operational protocol! If you were a teacher I wouldn't have been expelled from school! Well...... I dunno!! lol Seriously though I have to commend you on another fine production of relativity! Thank you & take care buddy!

[@SouthpawAutoworks]

Hahaha that's too funny. Thanks for watching, James!

[@MorganOliff]

I found this video because I was searching for why my transmission is stuck in first gear. When you drive and get to where 2nd gear would normally be it makes a shift but there is drag and the truck slows down. But if you manually put it in 1st gear it runs 1st gear by itself just fine. Just trying to figure out what that might be.

[@castledomeknives9395]

W O W....Lots of good info...I'm impressed....lots of engineering in them transmissions

[@SouthpawAutoworks]

I'm blown away that people were able to create the planetary gear set. Pretty amazing... Thanks for dropping me a line!

[@dakotapoe2890]

Great job bud helped me understand 4l60e a little bit better now and I really hope to ur video take off ik I'll start supporting you know that I found you on here

[@SouthpawAutoworks]

Right on! Thank you for dropping me a line! Much appreciated. PS - If it feels right to you, please help me spread the word about this channel. Here's some easy ways to share... 1 Handed Transmission Rebuilder: (60-Sec Preview) kzbin.info/www/bejne/r2S5mquXlKqWZ6c How the 4L60E valve-body works: (60-Second Preview) kzbin.info/www/bejne/nIizhJSCmsaCjqs

[@SouthpawAutoworks]

You're very welcome. I'm glad you enjoyed it. Thank you for being here. Thanks for dropping me a line! PS - If it feels right to you, please help me spread the word about this channel. Here's some easy ways to share... 1 Handed Transmission Rebuilder: (60-Sec Preview) kzbin.info/www/bejne/r2S5mquXlKqWZ6c How the 4L60E valve-body works: (60-Second Preview) kzbin.info/www/bejne/nIizhJSCmsaCjqs

[@efijemuehphilip542]

Thank you sir for your good works.Having watch this video on clutch and band application.I have an automatic transmission that is clutch and band type but it three speed aisin 172a automatic transmission.The problem it has is that it won't move when put in any gear unless the gas pedal is floored and it will move sluggishly just like a burnt clutch in manual transmission..The engine revs high but the transmission moves slowly.I have opened it,and discovered that all the clutches are ok but one seal(Teflon) at the output shaft was broken so I changed it and also changed the valve body but the transmission still behave the same.Sir, please what else should I do for it to be ok.Thanks for any response

[@efijemuehphilip542]

Hi Thanks for this video.I have watched this video severally to fully understand how it works.I am wondering whether a worn engine rod bearing can make the the automatic transmission not to shift easily into third gear without the crankshaft making knocking sound.

[@MrSFSTUDIOS]

Thank you for this very clear explanation. Now I understand how my 4L60e automatic works and why it is so expensive to rebuild one. So many parts have to be be installed perfectly or the transmission won't work or last very long. I can also see how important it is to regularly service the transmission to prevent grit from accelerating wear on the clutch-packs and bands.

[@frankv6263]

Keep up the great work! You might have only one full arm but damn you do better work than most that have two full arms 🤯

[@seshachary5580]

very educative. Thank you regards

[@151bradhatt]

It amazes me that someone can just think this stuff up on a piece of paper and actually make it work

[@SouthpawAutoworks]

I feel the same way! Truly amazing... If you haven't watched em already, you'll probably enjoy the videos about hydraulics, too. Here's the latest... 4L60E Shift Solenoid - Part 1 (Basic Operation) Preview kzbin.info/www/bejne/gImpm4CiqNacqNU

[@stevearmstrong4561]

Perfectly explained and delivered.

[@SouthpawAutoworks]

Thanks for dropping me a line!

[@GavinSwalley]

Would like some help plz and. Thanks

[@jakenbaked87]

I've seen a ton on general explanations on how the transmission works, but none actually show the gears in motion like this. Most useful video for understanding how a transmission works! Thank you!

[@SouthpawAutoworks]

Right on. Glad it was useful. Thank you for dropping me a line.

[@williammurray8060]

Nice video, I have a question. I've got a 93 2.5 4cyl s-10 2wd with 4L60E. When I start it cold it lunges forward a little bit???

[@SouthpawAutoworks]

When it lunges forward, do the engine RPMs drop, momentarily? Does the engine stall? Or act like it might stall?

[@efijemuehphilip542]

Thanks for this video.i am so impressed.I have a problem at hand and with this knowledge you have impacted I believe am close to getting the answer.I have a Suzuki aisinA172

[@SouthpawAutoworks]

Glad it was helpful! Thanks for dropping me a line!

[@peterpurol7873]

Soooo, let me throw something out there. The 1996 Corvette I own has slipping issues from first to second to third gear and occasionally comes out of fourth gear due to low line pressure caused by either a bad pump or bad torque converter. (I heard high-pitched whining earlier in the year and now rattling is occurring). No money exists to fix the problem, yet it's a daily driver. Currently, anti-slip and an upgraded boost valve are all I've done in an attempt to keep the tranny working through the winter. Based on what I've watched in this video it doesn't look like a Sonnax second gear super servo would benefit me in any way? Is that an accurate assessment?

[@SouthpawAutoworks]

What line pressures are you seeing with the trans in Park, and the engine idling? What's the pressure when the engine/trans are cold? What's the pressure when the engine/trans are warmed up? Whining is likely coming from the pump. Low fluid level will cause a whining noise. Same goes for a bad filter seal. Among other things... I have questions about the slipping, but I'mm out of time today.

[@joebushell2438]

😢very good video,thank you sir

[@efijemuehphilip542]

Hi, thanks.My Suzuki aisin A174 auto tranny would hold down on it break on itself while am accelerating and immediately start running smoothly.It would brake,then run ,brake then run on it own.With what I have learnt from your video,I want to believe that it is the forward clutches that is engaging and disengaging.Am I right? Thanks for your reply

[@SouthpawAutoworks]

I am not familiar with the Suzuki A174. I am looking at some reference material on that trans, right now. However, there's not a lot to go off of, other than a layout of the internal guts. They're referring to their clutches as C1,C2, and BOB2. It's not uncommon for different manufacturers to use different names for the "Forward" Clutch. How many speeds is this transmission? When you say, "auto tranny would hold down on it break on itself while am accelerating and immediately start running smoothly." Does it feel like the brakes are being put on, while you are driving?

[@JOHNPHUFNAGEL]

great job explaining this

[@SouthpawAutoworks]

Thanks for dropping me a line! PS If you're interested in spreading the word about this channel... 1 Handed Transmission Rebuilder (60 sec): kzbin.info/www/bejne/g6fZZnaaZ8iJjZY

[@allycat9920]

My 4l60e stops pulling at 60 mph after about 20 to 25 miles on the road if I stop and star over its good for a nuther 20 miles then it stops pulling in overdrive again. Can you help????

[@SouthpawAutoworks]

I've got some ideas, however, I'm pressed for time right now. I'll fire back ASAP.

[@cryothunder328]

Do you think you could give me a short explanation of what the overrun clutches do when in manual shift. I just don't understand what there purpose is?

[@SouthpawAutoworks]

It's hard for me to give a short explanation...but, I'll do my best. The Input Sprag enables engine power to enter the planetary gear set...but, as soon as we let off of the gas, and the vehicle starts to coast, and the Input Sprag "disconnects" from the planetary gear set (rotates freely, in the other direction) (known as free-wheeling). The Input Sprag acts just like a Craftsman 3/8 Ratchet...or any other brand. It locks when driven one direction, and unlocks/ratchets/free-wheels in the other direction. The Overrun Clutch prevents the Input Sprag from free-wheeling...which gives the vehicle engine-braking. I have not watched any of these videos, in a long time. Thinking I covered the Overrun Clutches in the video below. Note: I sometimes call the Overrun Clutches "Coast" Clutches. Not technically correct...but, hey. 4L60E Power Flow - Manual 1st, Manual 2nd, & Manual 3rd kzbin.info/www/bejne/bJzJcqiOf6uMfKc

[@efijemuehphilip542]

Thanks Sir for this video.I would like to know why automatic transmission won't take off in first gear while in drive range

[@SouthpawAutoworks]

It could be a number of things. Hard to say without having more info. Check engine light on? Codes? Trans recently rebuilt? Vehicle mileage?

[@dwreed63]

Excellent 👍👌 Thank you for this, really helped me understand things.

[@SouthpawAutoworks]

Right on! Thanks for dropping me a line.

[@GoatRopeGarage]

Great content! I've got an odd issue where I don't really have third but I've got 4th. It almost seems like it isn't getting enough pressure to engage three 3-4 pack. I've tried to trace it on a hydraulic diagram but man does it get complicated, lol!

[@SouthpawAutoworks]

It def gets complicated. ha. Especially as a whole. Fortunately, it gets a lot easier to digest when things are broken down into bite-sized chunks. Check out these videos to learn more about 4L60E hydraulics: Pump: kzbin.info/www/bejne/nXuYdJeGf9R9r8k PR Valve (Line pressure): part 1: kzbin.info/www/bejne/e33Le5-Qp86Xf7s ...part 2: kzbin.info/www/bejne/mnvPhpiZbpaenbs ...Part 3: kzbin.info/www/bejne/hoqUpaWQmrGkiq8 AFL Valve: kzbin.info/www/bejne/gqKlnJebnLWdhM0 Shift Valve: kzbin.info/www/bejne/oIHLnmpsh6mtbLs Shift Solenoid: kzbin.info/www/bejne/fJKmmYqjmNh0nas That's interesting... What do you mean by you "don't really have third..."?

[@GoatRopeGarage]

It isn't fully like neutral, it shifts in to third and the rpms shoot up, but if I get there throttle and keep them high enough it will slowly build speed until it shifts into 4th. I have better luck driving in manual second and then kicking to OD when the speed will be high enough to engage 4th It is almost like a hydraulic circuit is bleeding off pressure when in third but when it commands 4th the clutches have enough pressure to engage.

[@SouthpawAutoworks]

Thank you for the clarification. I'm gonna have to take a look at the circuitry, and fire back later. This one definitely has my interest.

[@SouthpawAutoworks]

What's the history on the trans? Lot of mileage? Recently rebuilt? If recently rebuilt, what was the original failure?

[@GoatRopeGarage]

@@SouthpawAutoworks Thanks for looking into it, and keep up the good work, some of the best transmission content I've seen!

[@CarlosCastillo-cg1ou]

I'm starting to understand what you had shown about each component works. Thanks for that example

[@SouthpawAutoworks]

Right on! Glad you got something of value out of the video. I saw your other comment (2017 silverado 4.3L). Just haven't had a chance to respond. I will say that the 4L60E was phased out of the GM lineup in 2013/2014...depending on model of vehicle.

[@صيانةالسياراتعلموخبرة]

very clear explanation

[@SouthpawAutoworks]

Glad you got something out of it. Thanks for dropping me a line.

[@ronaldpoe3569]

Also for only having one hand u have over come the loss so we'll I don't think I could do a great of a job as you well done keep vids coming have told my friends about your channel very informative well done will pass the word on for you

[@SouthpawAutoworks]

Appreciate you helping the channel grow. 1 Handed Automatic Transmission Builder: (60-Seconds) kzbin.info/www/bejne/r2S5mquXlKqWZ6c

[@cenick7254]

Hi , May I have some information about one-way clutch ? Thank You very much.

[@SouthpawAutoworks]

We plan on covering one-way clutches in a future video. Stay tuned! Thank you for your interest.

[@davidwostrel]

Great job, that was really great explanation. I was getting a noise in reverse, first and third and now I know it is related to the transmission for sure because of the 2-4 band, unfortunately that just means I need a rebuild but now I understand what is going on inside just a little better!

[@SouthpawAutoworks]

Glad you got some value out of the video. Thanks for dropping me a line.

[@efijemuehphilip542]

Hi, thanks for this video.Yoiu didn't talk about how the reverse happens

[@SouthpawAutoworks]

Reverse will be covered in a separate video, in the future. Appreciate you dropping me a line.

[@douglash3129]

You are making info penetrate my cement head, very nice presentation Thank You!!

[@SouthpawAutoworks]

Glad it was helpful! Appreciate you taking the time to drop me a line.

[@WadePeters-u9x]

Shifting selenoid

[@matthewgluth412]

These are great videos. Thank you for making them. I have a 4l60e I am rebuilding with my son. We have it back together and now have no first gear. We have disassembled and checked both one way clutches, solenoid a, and the valve to be sure it moves freely. We have no first in any manual or drive gear. All the other gears work and shift well including reverse and TC lockup. Any thoughts on why we do not have first gear or where to look? Another note. The transmission had a shift kit when we took it apart and we noticed the valve is different than the manual we have if that is of importance. Thank you in advance for any help or guidance.

[@SouthpawAutoworks]

I remember reading your comment, and not having time to respond....but, I really wanted to. That's so cool that you're building a 4L60E with your son! Building memories... Were you able to get to the bottom of the problem? Was the 1-2 accumulator missing an o-ring?

[@matthewgluth412]

We found that the transmission was a B&M build and then we added a shift kit. There is no information on B&M and when adding the shift kit there were values and spring combinations that the transmission didn't like. We pulled all the B&M parts out and used the shift kit and she started working again.@@SouthpawAutoworks

[@beausw]

Man oh man, I can get an engine inside out and backwards, Standard transmission, perfect sense. Auto trans have always been Voodoo before this. I had no Idea. This is great. Thanks for posting.

[@SouthpawAutoworks]

Right on. Glad you enjoyed it. If you're interested in learning about the hydraulics, or the electrical... 1-2 Shift Valve: 4L60E: 1-2 Shift Valve + 1-2 Shift Solenoid (Part 1) Basic Operation kzbin.info/www/bejne/oIHLnmpsh6mtbLs Shift Solenoid: 4L60E Shift Solenoid - Part 1 (Basic Operation) kzbin.info/www/bejne/fJKmmYqjmNh0nas 4L60E: PR Valve (Part 3) Torque Signal Oil Pressure (4L60E Line Pressure) kzbin.info/www/bejne/hoqUpaWQmrGkiq8 Thanks for dropping me a line.

[@bobbytwilley1789]

Perfect video wish I had found your channel years ago

[@SouthpawAutoworks]

Glad you found the channel! Welcome aboard. The positive feedback is appreciated. Thanks for dropping me a line. PS If it feels right to you, please help me spread the word about this channel. 1 Handed Transmission Builder: (60-Sec Preview) kzbin.info/www/bejne/r2S5mquXlKqWZ6c

[@scottr4086]

Really enjoyed your video. Helps me understand the basics, look forward to watching your other videos on the 4L60E

[@kylestenger15]

Thanks bro helped me with my 4th year schooling

[@SouthpawAutoworks]

Awesome!

[@peterpurol7873]

THANKS FOR ALL THE HARD WORK MAKING THESE VIDEOS AND THEIR CONTENT!

[@SouthpawAutoworks]

Thanks for dropping me a line.

[@BlainShobe]

I believe this confirms I have welded the forward clutches on a 1990 4l60. I was doing some tuning watching scan data while brake torqing and when I put it in reverse to back out of the shop it went nowhere. I shut the engine off and pushed it out of the shop. I have all forward gears and neutral pulls forward like low gear. I had another trans on the bench I had just built with many upgrades so I put it in and will tear down the other replacing the forward clutches and steels and of course all of the soft parts from there out. It was a really good shifting unit that had successfully handled plenty of power for only about 10,000 miles before I made this stupid mistake. If you have any suggestions they are appreciated.

[@SouthpawAutoworks]

It sounds like you're on the right track. Based off of what you described, it does sound like the Forward clutch is stuck on (due to damage). Under that condition (brake torquing) the line pressure must be elevated high enough in order to prevent the Forward Clutch from slipping (and burning up). If you haven't done so already, you might want to attach an automatic transmission oil pressure gauge (must read higher than 300 psi), to your currently installed unit. You'll want to verify that the line pressure is rising high enough when the trans is under full load. You mentioned a "1990 4L60." This trans is controlled by a governor and a TV cable (Throttle Valve). The TV cable is used to influence line pressure. Line pressure is used to apply the clutches. Low line pressure can be caused by a number of things. What method did you use to adjust the TV cable?

[@BlainShobe]

​@@SouthpawAutoworksTV cable at full extension at WOT but I also have the spring loaded sonnax kit that increases TV at lower throttle angles.

[@tjkustoms]

5 minute commercial. No thanks!

[@SouthpawAutoworks]

.......

[@brianreese140]

94 Z71 only 1st ,3rd, and reverse gears. Any guesses

[@SouthpawAutoworks]

It sounds like the 2-4 band is in trouble. As the name implies, the 2-4 band is partially responsible for creating 2nd gear and 4th gear. The band is activated (or applied) by the 2-4 Servo. The band lives inside of the transmission case. It's wrapped around a drum. When the band is applied, it squeezes the drum, and prevents it from rotating. This has positive effects on the planetary gear set.

[@williamlopez4934]

Thank for the video . Helps a lot I just rebuilt my 4l60e think I got a problem feel like it go in and out 3 to4 gear only at 50mph. Am guessing is the band

[@SouthpawAutoworks]

When the problem occurs, can you watch the tachometer? How much is the RPM change/drop, as the trans cycles back and forth between gears?

[@williamlopez4934]

@@SouthpawAutoworks that's for the replay. 50mph it happens I say 300rpm different. Also I disconnected the tcc lock up and it still does it.

[@peterarvaszulu5069]

Wonderful tuition,if I knew where to find you I would come for practicals now. Thank you

[@10malabdullah10]

Great job, that was really great explanation.

[@SouthpawAutoworks]

Appreciate the positive feedback.

[@PnwTinkerer]

Excellent video!!!!! Thank you!!!!

[@SouthpawAutoworks]

Appreciate the feedback.

[@BrianJohnson-tz6xl]

What solenoid would I need to replace the drive in my 4l60e transmission?? On an automatic transmission??

[@SouthpawAutoworks]

Does the vehicle not move forward (when the shifter is placed into Drive)?

[@BrianJohnson-tz6xl]

@@SouthpawAutoworks no it doesn't, but can go in reverse with no problem

[@SouthpawAutoworks]

If there's a problem with a shift solenoid, you'll still be able to get forward movement...there's more to this, but I'll keep it short. This has me thinking Forward Clutch and Input Sprag, as the possible problems. With the engine idling in Park, if you shift into Manual 1 (D1), will it move forward?

[@rubberbandman2540]

really awesome video thanks mate

[@SouthpawAutoworks]

Glad you enjoyed it.

[@abelmartinez1428]

How can I get in touch with this person?

[@SouthpawAutoworks]

I read every KZbin comment. I respond to as many comments as I can...time permitting.

[@basicdetail4512]

Wow what a nice channel bro thanks

[@SouthpawAutoworks]

Glad you like it

[@MauricioProfessor]

Parabéns! Ótimo vídeo. 🤗

[@SouthpawAutoworks]

Obrigado.

[@donjuan4925]

Great video! Thank you!

[@SouthpawAutoworks]

Glad you enjoyed it.

[@mrcodesteez1211]

thanks bud great video

[@SouthpawAutoworks]

Thanks for dropping me a line.

[@RandomGuyDan]

Only watched part of the video, but I'll watch the rest tomorrow. I'm in the process of rebuilding a 4l60E from a 2004 Envoy XUV with the 5.3 LS. Someone abused the crap out of it, but when I'm done it will be better than new.

[@SouthpawAutoworks]

That's exciting! Thanks for dropping me a line! Here's another one that you might like. Here’s a 60-second preview of the AFL Valve: kzbin.info/www/bejne/r5e7latsdtCkoLc

[@richarddiaz8248]

It’s amazing engineering

[@SouthpawAutoworks]

Right!

[@7080nik]

Great video! Subscribed . Very informative. Just with you were doing a Turbo 400 like I have in my 70 SS Chevelle hot rod. Its crazy all the stuff going on in an auto transmission. Most people dont have a clue Surprised they are as reliable as they are.

[@SouthpawAutoworks]

Thanks for the sub! It really is crazy how much is going on in there. You and me both. Thanks for dropping me a line.

[@rockabichebel]

hello every body plz I have 4l60e on 6.0l gen 3 I have a transmission problem R n 1 working verry well 2 n 3 n 4 don't have a power when I give a little throttle starts to slip shifting down work verry well by hand i have slow shifting between 1 n 2 n 2 n 3 n 4 with slipping when rpm start to more then 1500 3 is better from other gears and 2 work verry well on low rpm plz you can help me thank you

[@SouthpawAutoworks]

I responded to your duplicate comment, on the other video.

[@caliman823]

So complicated yet so simple. Very impressed with your ability to work without your hand. I broke both wrists and my left elbow years ago. I also wrench for a living and sometimes not being able to flex my wrists correctly makes it complicated.

[@SouthpawAutoworks]

Both wrists and an elbow!? That must've been a difficult recovery...from two hands, to no hands. Glad you're back to wrenching. Complicated....I totally feel you. Thanks for dropping me a line.

[@TBusaMike]

Rob...GREAT VIDEO !!!!!... I just went through an '08 4l65e and everything works exactly the way you described in the video. However, when it shifts to 4th it feels as if the brakes are being applied. I looked through it again and found the band smoked and the drum surface shiny and bluing as if not applying enough or either something else applied when not suppose to be...Any ideas ?

[@SouthpawAutoworks]

Great question, Mike! When time permits, I'll make a video about this specific issue. For the time-being, I've expressed some thoughts below. If you want to help this KZbin channel grow, check out this video: kzbin.info/www/bejne/nZq5aayJfpZ2sJo (Thanks for your support!) A few thoughts come to mind... 1). A seized Input Sprag. 2). A broken Forward Clutch piston (Cross-leak). 3). Cross-leak somewhere in the trans (Overrun clutch circuit being fed oil, when it's not supposed to be). Seized Sprag: The sprag must rotate one direction, and hold (or not rotate) in the other direction. It must also be installed, into the 4L60E, in the correct orientation. It's very easy to install it backwards (rebuilding mistake)....which is not the issue at hand. I'm leaning towards a sprag failure, as opposed to a rebuilding mistake. A sprag can fail in one of two (2) ways: 1). Rotate both directions. [Results in no forward gears] 2). Hold (prevent rotation) in both directions (referred to as a siezed sprag). [Results in binding (feels like the brakes are being applied) in the 4th gear] A broken Forward Clutch Piston: It's possible for the Forward clutch piston to crack, and leak apply pressure (oil) into the overrun clutch piston. When the Overrun Clutch is activated (turned on) the Input Sprag is no longer able to freewheel. In other words, it holds in both directions. Under certain driving conditions, this is desirable. However, the overrun clutch should never be on in 4th gear. When the overrun clutch is applied in 4th gear, it prevents the sprag from rotating (just like a siezed sprag). [Results in binding (feels like the brakes are being applied) in the 4th gear] If in doubt, you could replace it. 4L60E Molded Piston Kit: amzn.to/3CRVECB (Paid Link) Cross-Leak: I'd start with the sprag and the piston. If you can't find anything there, then it would be time to look for cross-leaks elsewhere. If it were me, I'd be looking at the Input Sprag. I'd also be looking closely at the Forward Clutch Piston (crack). ****Parts**** (Paid links) 2-4 Band: amzn.to/3CUSspR Input Reverse Drum: amzn.to/3g8v9PI (Caution: Some have a built-in check ball, some don't. Inspect your drum. Make sure you order the correct one.) Input Sprag: amzn.to/3CRXEL7 (Best to spring for a good one. When these fail, you can lose all forward gears.) If you want to gain a better understanding of what's going on, here's some more info...... A good place to start is with the 4L60E Clutch and Band application chart (Video time-stamp: 18:35). Clutch components that are used to create 4th gear are: 1). Forward clutch*. [I'll get to the star (*) in a minute.] 2). 3-4 Clutch. 3). 2-4 band. I'm not sure if you previously watched the video about 4L60E planetary gear sets (kzbin.info/www/bejne/h5u3YXaLfJxmj68). Per the video, there are three (3) members of each planetary gear set; sun gear, planet carrier, and the ring gear. In order to achieve a forward/reverse gear, one member must be rotated by the engine and one member must be held (or prevented from rotating). Direct drive is an exception to this rule (two members are simultaneously rotated by the engine). If this short explanation is not making sense, please check out the video about the gear sets (kzbin.info/www/bejne/h5u3YXaLfJxmj68). In 4th gear, for the 4L60E, the 3-4 clutch transfers engine rotation to the planetary gear set (it makes the rear planet carrier rotate). The 2-4 band prevents the reaction sun gear (the rear sun gear) from rotating. This creates a gear ratio of roughly 0.75:1 (Common gear ratio for overdrive, in any transmission). These are the only two (2) clutches that are needed to create 4th gear. So, why in the world are the Forward clutches still on??? Wouldn't this extra clutch cause the gear set to bind up? Absolutely!....but.... Even though the Forward clutches are technically on, they are not doing anything. In 4th gear, the input sprag freewheels, disconnecting the forward clutch from the planetary gear set. GM did this on purpose, for upshifting/down-shifting strategy. More on that, another time. DISCLOSURE: 🕵 As an Amazon Associate I earn from qualifying purchases. Some, if not all, of the links contained in this video description/comment are affiliate links. This means that, at no additional cost to you, I will receive a small commission on any purchases you make through the website links provided above.

[@muhammedasharaf9246]

Very good infermasion

[@SouthpawAutoworks]

Glad you liked it. The positive feedback is appreciated.

[@bhuoindersingh8586]

Really appreciate sir ,,im from india, working in kuwait 🇰🇼 and watching your channel 👍

[@SouthpawAutoworks]

Awesome. Thanks for dropping me a line.

[@randy1ization]

so the 2/4 band apply is a holding mechanism only? and what exactly do the low/reverse clutches do.. than k ye.

[@SouthpawAutoworks]

Yes, both are holding mechanisms (brakes). The band anchors the Reverse-Input Drum to the transmission case. That drum controls the Reaction Sun Gear. The Low-Reverse Clutches anchor the Rear Planet Carrier to the transmission case. This prevents the carrier from rotating...but still allows the little gears (pinions) to spin. This is used to help create Reverse. Still need to create a video on Reverse... The Rear Planet Carrier is also splined to the Ring Gear of the front planetary gear set. By holding the Rear Planet Carrier to the transmission case, we're also (simultaneously) holding the Ring Gear of the front planetary gear set. This is used to help create 1st gear.

[@randy1ization]

@@SouthpawAutoworks so the pinions are the minions of the transmission in essence?

[@randy1ization]

@@SouthpawAutoworks sir, what EXACTLY makes 95 4L60E A stand alone transmission,., I have 3 4l60e im learning on,, a 94,95,96.. so far all 3 cases look to be exactly the same...I cannot see any differerences in the case valve bodies.. the 94, 95, and 96 all have slightly different seperator plates.. the 94 pump is different than the 95 and 96 pump. there is an extra channel in the 95 and 96 pwm stamped pumps. the valve bodies look exactly the same, except the 95 and 96 have a tcc solenoid on them and the 94 doesnt. are there any other differences.. it looks like if I wanted to make the 95 or 96 work in a 93 or 94, all that would be needed was to change the pump, seperator plate, and trans wiring harness.. and possibly the tcc regulator valves in the valve body? any clarification of this would be greatly appreciated.. one of the trans I bought is a 95, that came out of a 94 truck.. dont know if it ever worked right and its the one with the smoked low reverse clutches.. it still had the pwm pump on it, and tcc solenoid attached to the valve body.,, likely not used because the 94 doesnt have the plug connector for it in the wiring harness.

[@SouthpawAutoworks]

I'm gonna have to dedicate a video to this topic.

[@jaronvaughn4520]

This the first video of your that I have watched. I have been wanting to know how this worked for a very long time. You just earned another subscriber. Thank you for the great video👍

[@SouthpawAutoworks]

Right on. When time permits, there will be more content like this. Appreciate you dropping me a line (and subscribing).

[@indiankite7358]

Excellent video!

[@SouthpawAutoworks]

Thanks!

[@Aintright890]

I am trying to learn how to rebuild an automatic transmission as a hobby .I am and have been watching all your videos several times THANK YOU ...

[@SouthpawAutoworks]

Right on! I'm excited for you. Thanks for dropping me a line! PS - If it feels right to you, please help me spread the word about this channel. Here's some easy ways to share... 1 Handed Transmission Rebuilder: (60-Sec Preview) kzbin.info/www/bejne/r2S5mquXlKqWZ6c How the 4L60E valve-body works: (60-Second Preview) kzbin.info/www/bejne/nIizhJSCmsaCjqs

[@Jakevrana]

Hey boss, I grew up in a transmission shop, my dad is a 45 year vet when it comes to building trannys and I have picked up the torch as well. What draws me to your channel is a similarity to my dad. Now as I say this next part just know it’s a complement…….. my father could have collected disability benefits from the age of 12 due to a car accident, but instead of that he became a successful business owner and never used his handicap as an excuse to slow him down. He has been an inspiration to me to not make excuses, so with you only having one hand and still being a master at your craft is a motivation to me to not make excuses and with enough effort and determination, you can do anything. Keep up the good work, letting people know that you can have a great and rewarding career by getting your hands dirty. Thanks for the video

[@SouthpawAutoworks]

That's awesome about your dad. I really appreciate you taking the time to share your thoughts. Thank you for dropping me a line.

[@leomenchey3726]

Thank you for many many years I've always been Afraid because I did not understand the entire workings of an automatic Transmission the way you explain that in detail makes me more comfortable

[@SouthpawAutoworks]

Right on! That's awesome!

[@Spidercarfix]

Learning from your videos from my poor country Haiti, thanks for the great explanations!!

[@SouthpawAutoworks]

Right on! Glad you enjoyed the presentation. Thank you or dropping me a line.

[@TBD3.0]

Take notes this video is filled with a wealth of information. 👍🏻 worth every single minute of this video watched.👍🏻

[@SouthpawAutoworks]

Wow! Thank you for that.

[@1320pass]

Fantastic explanation on a very versatile transmission and successor to the TH700R4.

[@SouthpawAutoworks]

Glad you enjoyed it. Thanks for dropping me a line, 1320pass.

[@JohnSmith-wb6kq]

Outstanding video mate, well done 🙂

[@Mike-xt2ot]

Great tutorial!

[@SouthpawAutoworks]

Thanks for dropping me a line!

[@hosalabad]

Great video.

[@SouthpawAutoworks]

Glad you enjoyed it.

[@dale3645]

Are there any “for sures” on how to access a torque converter? If your 3-4 pack goes, should you always replace the torque converter. There are really no good videos on whether or not to replace it or when to replace it. Any ideas? Just always replace it?? (Mine, all the trans fluid left trans & when to the transfer case. Bad seals. Lost 3&4. Will drive good if shift in 2nd gear.). BTW. BEST VIDEO I EVER SAW ON HOW THE TRANS WORKS. UNBELIEVABLY NICE JOB.

[@SouthpawAutoworks]

There are indeed ways to test the health of a torque converter. When time permits, I'd love to make a video on that. When there's a transmission failure (both soft parts [clutches, etc] and hard parts [gears, bearings, etc]), contaminants will be circulated throughout the transmission. Those contaminants will make their way into the torque converter, the trans cooler, the valve-body, etc. The trans can be cleaned (during rebuild) and the cooler system can be flushed. However, the torque converter can not be easily cleaned...as it's a sealed unit. For the most part, torque converters are welded shut. They require a specialty shop, with specialty tools, to cut them open, clean them, and reassemble. If you rebuild a trans, and then reuse the torque converter, you'll likely contaminate your new trans, and cooler, with debris from the converter...which could result in a repeat transmission failure. Sorry to hear that about your 4L60E. A leak that could not be seen from the outside. That really sucks... Thanks for dropping me a line! PS - If it feels right to you, please help me spread the word about this channel. 1 Handed Transmission Rebuilder: (60-Sec Preview) kzbin.info/www/bejne/r2S5mquXlKqWZ6c 4L60E AFL Valve - Part 1: (60-Sec Preview) kzbin.info/www/bejne/r5e7latsdtCkoLc

[@dale3645]

Thanks!!!! Yes, not a drip on my driveway. I had just checked all the fluid levels a month earlier. Again, great video & I will share it.

[@champspec]

Well explained in detail. I’ve rebuilt about 50 of these and learn something new each time.

[@SouthpawAutoworks]

Right on! If you're interested in learning more about how the 4L60E works, check out these videos. I'm still working on finishing this series...and I'd like to go back and re-do the earlier videos. Hydraulics: How it Works (4L60E) kzbin.info/aero/PLMK9OC5NGhbhvj11GajN0Mcg0k3YgsRK- The positive feedback is appreciated. Thanks for dropping me a line. Happy building.

[@mikehanlon9773]

Great demonstration showing internals.Im a transmission tech and find it amazing how all this was engineered to work as it does.

[@SouthpawAutoworks]

I'm in awe of the engineering, too. The mechanical, the hydraulics... All of it is wild. Appreciate the feedback. Thanks for dropping me a line.

[@zakpeterson6713]

Best and simplest description ive seen on the 4L60. Thank you.

[@SouthpawAutoworks]

Glad it was helpful!

[@randy1ization]

excellent presentation!!!! I just took apart a 95 4l60e ONLY the low/reverse cluthes are burned,, why would this be? thanks

[@SouthpawAutoworks]

There are a number of reasons that they can fail. A common wear item is the Boost Valve. It's used to elevate line pressure (oil pressure used to apply the clutch packs). When the Boost Valve wears out, it can wipe out the Low-Reverse Clutches.

[@randy1ization]

when line pressure is insufficent , that affects AFL pressure I think, (the activation pressure.. ), is the low reverse clutch pack the first to starve for fluid being its the furthest away from the pump? thanks

[@SouthpawAutoworks]

Low Line Pressure affects everything, including AFL pressure. There are several different oil pressures, all with their own jobs. But, Line Pressure is king of the mountain. If there's a problem there, it affects everything down-hill/down-stream. Don't know if you've already watched this video... 4L60E: AFL Valve (Part 1) How it Works: kzbin.info/www/bejne/gqKlnJebnLWdhM0 Clutches can fail for a number of reasons. However, the most common is a loss of (or inadequate) oil pressure. With the trans shifted into Reverse, Line Pressure jumps up a bunch....or at least it should. Even if the pump is capable of building enough pressure, the independent oil circuits that feed the clutches (clutch pistons) must not have any oil leaks.

[@randy1ization]

@@SouthpawAutoworks I see,, thanks !! so now I can look for a reason that the low/reverse pressure circuit likely lost its pressure. I will look at some hydraulic circuits and see if I can find some clues.. transmissions are fascinating for sure.. if the information thats out there today, would have been available 25 years ago, I likely would have went into the transmission repair and rebuilding field.

[@SouthpawAutoworks]

When time permits, I plan on dedicating videos to each of the oil circuits for each gear. Gonna cover basic operation of a healthy system. Then cover all common problem areas, too...with solutions, of course.

[@judelingam6100]

Great sir

[@SouthpawAutoworks]

Thanks for checking it out!

[@justinArk-Box]

Never seen anyone do such a thing for us enthusiasts

[@SouthpawAutoworks]

Who's your buddy? Who's your pal?

[@justinArk-Box]

@SouthpawAutoworks i cant fathom the time aggravation into editing videos. Suppose its more than a tranny drop n rebuild. I have 545rfe. So same principle for 1-2, 2-3, 3-4 tcc solenoid isnt it. Same goes for line pressure? 25psi at 65 cruise with MDS solenoid unplugged. I cant stand MDS. Going to flash/delete someday. Been losing 4 and OD sometimes. Use to have a little shiver when it would go OD but now seldom.

[@justinArk-Box]

So when i lose high gears i found i have to disconnect battery or sit overnight and woolah.

[@leob4331]

Excellent job dude; you are awesome!

[@SouthpawAutoworks]

Glad you enjoyed the video. Thanks for dropping me a line.

[@leob4331]

@@SouthpawAutoworks hey bro, I got a question, seems like you have a lot of experience with transmission, I have a 94 trans am 5.7, when I push the gas to the floor taking off ot sounds like its grinding on something and dosen't wants to go then a big clunk then finally goes, I changed fluid , filter, torque converter and this is the fourth time that I dropped the transmission; I opened up and didn't find nothing wrong with it , the only thing that I found is that it didn't have a piston in the accumulator in the case but that's about it, also last time that I changed the filter I found some chunks of metal on top of the filter, but I didn't see anything missing or broken; any idea what I should be looking for? I don't know anything about transmission and any help would be appreciated , thanks in advance

[@leob4331]

*was missing the pistons that controls fourth gear

[@timtrial3971]

I have an a245e transmission that I want to modify. I've found it hard to find good quality videos that show the fundamentals. Thanks so much for taking the mystery out of these contraptions. I'm particularly interested in the control systems

[@SouthpawAutoworks]

We've got a number of other videos in the works. Stay tuned! PS - If it feels right to you, please help us spread the word about this channel. 1 Handed Transmission Rebuilder: (60-Sec Preview) kzbin.info/www/bejne/r2S5mquXlKqWZ6c 4L60E AFL Valve - Part 1: (60-Sec Preview) kzbin.info/www/bejne/r5e7latsdtCkoLc

[@timtrial3971]

@@SouthpawAutoworks thanks. I'll help all I can

[@evelynperez7576]

gracias amigo

[@SouthpawAutoworks]

You're welcome.

[@yachtsteve]

Watched it 3 times so far, I expect to watch quite a few more in the future

[@SouthpawAutoworks]

You're like me... I, too, watch/read stuff over and over. The repetition helps the info sink in. When time permits, I'd like to update these videos (animate them). Might make for a better viewing/learning experience. Thanks for dropping me a line!

[@tamarapipkin7675]

Your explanations are excellent and easy to follow!

[@SouthpawAutoworks]

Positive feedback is always appreciated. Thanks for dropping me a line!