This is probably the best video on the internet about the importance of taking care of your nails. Also the painting is good too.
@rybuds473 жыл бұрын
One thing i learned from ww2 model builder was to use warm water for the decals. Seems to make everything work better. Cheers!
@taylormcallister83154 жыл бұрын
Great video! :D Can't wait for your tutorial on how to cut nails.
@winleerasanthanah47162 жыл бұрын
these comments... xD
@MemowMedia5 жыл бұрын
You can get quite the bump of coke from that pinkie. Good tutorial though.
@RF-Ataraxia4 жыл бұрын
Oh my god, this music brought me back in time
@lemeres24785 жыл бұрын
I suppose, from an aesthetic stand point, there is a strong argument that you should probably just follow the panel lines/panels when you do sectioned painting of parts like this. It allows this relatively simple technique, and it allows you to make a whole 'part' that appears to be made out of 'that martial'.
@TaffiLouis5 жыл бұрын
When I sit down to enjoy my hobbies, I, too, like to crank some ear-bleeding, shrill EDM.
@Zaku2115 жыл бұрын
Genius, absolute genius. Thank you for posting
@gordonsoo3 жыл бұрын
Hi, do you panel line again after painting ?
@josealeman75037 жыл бұрын
great stuff man I learning a lot for tutorial but I have to focus really hard to look past the nails but other than that awesome and thanks
@kenc84112 жыл бұрын
I was hoping to see how to properly apply TINY water decals that always slide off with the cotton swab when you try to roll out the water, and when you try to move it back into position with a toothpick, it dries before it gets there. Eventually you get it right, but then it falls off when it dries. Apply Mr. Setter in an attempt to make it stick, and it cracks...
@statoilbensin21902 жыл бұрын
I love Tamiya paint!
@Mundane057 жыл бұрын
Is the extra-long pinky nail for taking stickers off the sheets, or just coke?
@YBPaladin6 жыл бұрын
Mundane05 Both? My man can multitask
@svensorenson87483 жыл бұрын
i love that your news paper is full of crime, murder and child abuse news
@kraudostudio7 жыл бұрын
Huge change, that grey combines very well. It is appropiate to top coat your gunpla after using the water decals or before?
@myphan63567 жыл бұрын
Dave Compton usually I top coat first layer, then panel line, then another coat, then decal and final coat.
@kraudostudio7 жыл бұрын
Wow man that is so professional, I'm a starter right now, getting into more advanced techniques bit by bit. Right now I own a flat (mate or whatever is called) top coat which I am planning to use in a MG. Do you recommend me doing several layers? I am jus trying to give that non-plastic look at the end. If I could only do one which will it be? (Low budget things...)
@TsorovanZero7 жыл бұрын
If you only have flat coat, do it as the absolute last thing. You don't want to panel line or decal on a flat coat because it'll cause issues. One layer of flat at the end should be enough, maybe a second if it doesn't look flat enough to you.
@Mugenstylo7 жыл бұрын
A proper flat top coat as final step is sufficient IMHO
@kraudostudio7 жыл бұрын
@Tsorovan Zero and @Mugenstylo Thanks for the advice! Double checking before doing it wrong haha @My Phan thanks also for your more professional procedure :)
@tokekch7791 Жыл бұрын
Does painting using gundam marker good ..?
@fechai1016 жыл бұрын
They are called fingernail clippers man! Very easy to use.
@victormurillo69566 жыл бұрын
I know these are decals but how do you apply stickers? Like am I supposed to spray them with something to ensure they last longer?
@chalkdemon80195 ай бұрын
If you use a Matt coat stickers will probably last.
@DreamboySixty96 жыл бұрын
Agree to everyone saying about your fingernails...
@Sh3ba58434 жыл бұрын
I’m so nervous to ruin another one. So I’m going to just stick with panel lining for now. Screw the paint brushing, and try this tape and spray paint technique I just saw.
@coryflecha83383 жыл бұрын
I have a question I just started painting my gunpla and I'm trying to find out if it's necessary 2 Prime before you paint what would be your advice
@dumbnstuck3 жыл бұрын
Yes.yes it is.least for acrylics
@ShadowMonarch95578 ай бұрын
@@dumbnstuck sorry I'm very late to respond to this but is it really necessary to topcoat after airbrush painting? Because sadly I don't have topcoat, I have acrylic paint but also have gloss black vallejo primer and normal black primer, I'm still missing the gray and white primer
@dumbnstuck8 ай бұрын
@@ShadowMonarch9557 a topcoat will really go a long way in keeping it protected. And specially if you do some different things with layering and chipping techniques. I've even had to topcoat before masking over my paint to keep it from getting damaged. You can certainly not top coat it but it will reduce the lifespan of the paint job and make it more likely to get damaged
@ShadowMonarch95578 ай бұрын
@@dumbnstuck I understand, I'm just wondering which topcoat should I get because there's different versions, I'm thinking about getting Vallejo glossy or Vallejo metal for metallic but idk which is for that purpose, and there's satin varnish and matt varnish but idk which one is for normal non-shiny paint or not, if Vallejo topcoat isn't good I'd think about getting U.S Art supply clear gloss coat or clear matte coat but it's a bit expensive
@dumbnstuck8 ай бұрын
@@ShadowMonarch9557 I use generic spray cans for the most part. Search modeling top coat. Down side being it may wear down and yellow quicker than other brands. So I haven't really experimented with too many brands this far. But I only have gloss, semi gloss, and matt. I'd say that pretty much covers it but you can always get what you think you'll need and experiment with them. I even have some brush on top coat.. Which is dangerous be warned. (They will ruin your brushes if your not careful) but it gives you control on what goes where
@Wheatley695 жыл бұрын
Jesus, how many of you people are going to cry about his fingernails? You're not the one living with them. Who cares, it's a good tutorial. I didn't even notice his nails until I went to the comments.
@ri-kungaming78586 жыл бұрын
I knew it this background song is my favourite this song was for Project Yi my main Champ
@metachion32475 жыл бұрын
what song is it?
@sharifahnurfarahani4 жыл бұрын
PLEASE TELL ME CAN I USE SPARY SAMURAI NOT TAMIYA BRAND
@kenho69386 жыл бұрын
I tried masking a few times but it never works out, I either have problems with the stickiness still stuck on plastic or the paint coming off (despite having left it to dry for a good 3 days even to a week...)
@collaredlynx8 ай бұрын
I'm really late but it may be of use for someone who stumbles upon this - gently apply the masking tape to something else like yor table to remove that extra stickiness should resolve both issues at once from my experience
@pausalvador61556 жыл бұрын
Amazing video! Sir, is it okay to immediately use a spray paint (desired color) directly on the kit? Especially when the parts are attached on the runners? I want to customize my second MG kit, which is 1/100 vidar, but i don't have any experience yet in doing paint custom. Please, i need help. Thank you very much!
@olivercorbett83166 жыл бұрын
I wouldn't spray the Runner becuz it leaves nubs in the old color
@pausalvador61556 жыл бұрын
Oliver Corbett thanks for the tip. I did it already and it was awesome. :D
@PineUpAll2 жыл бұрын
1/100 Vidar isn't even a Master Grade lol
@statoilbensin21902 жыл бұрын
@@PineUpAll So? Let the man have fun, its 4 years ago.
@cosmorunner234 жыл бұрын
wtf, i just happened to listen to this song and at the same time i was browsing and found some gundam videos which got me kind of interested as ive never built a gundam kit before, literally the first video i click on to see how people paint or modify gundam kits has the same song playing lmao, what are the chances
@statoilbensin21902 жыл бұрын
I thought this melody was awful tho.
@andrewfern37567 жыл бұрын
Ughhhh. Decals scare me tons. In an "it's exciting" and "I hope I don't mess up" kind of way
@AceKylar3 жыл бұрын
Water decal especially, I’m a chicken so I transfer my decal by sliding it onto the surface with a cottonwab
@ZylethXenocian7 жыл бұрын
The tutorials are great, but the fingernails make it unbearable...
@PKToysoldier7 жыл бұрын
I really want to watch these videos, but I just can't. It is so offputting.
@YBPaladin6 жыл бұрын
ZylethX3N0 I didn't notice anything till you said something
@diamonshade74846 жыл бұрын
Your weak
@shoebillstonk5 жыл бұрын
And i thought it was that annoying edm music
@DwenLang3 жыл бұрын
Used to split
@rgm-fleet897 жыл бұрын
if the grey is more pale, almost on par with white, then it will be nice as rx 3.0 separation color style.
@totallyrad96916 жыл бұрын
Is it fine if I use a marker for majority of the figure? I need help.
@HgKim-dc6cg6 жыл бұрын
btw, what is masking?(sorry for being so ignorant) is it like leaving space out for painting?
@kelajuan_6 жыл бұрын
우주미르 yes
@christmasisawesome93487 жыл бұрын
Great video!! One thing though... isn't it better to sand the surface before applying the paint? Or even the base layer?
@aleemlatif92997 жыл бұрын
Christmas Is Awesome sand > primer > paint .. no sand no primer.. straight to the paint and top coat
@jordsdearce90972 жыл бұрын
@@aleemlatif9299 is this also applicable for the innerframe?
@jarriaga897 жыл бұрын
Thank you. THANK YOU very much for posting this tutorial. Masking has always been a huge problem for me.
@luisfernandolucena206 жыл бұрын
Now i'm sure I'm a totally noob about gunpla thanks for the tutorial
@Jayyucoffee6 жыл бұрын
Nails are mad!
@Erich1617 жыл бұрын
Are you able to show this tutorial on smaller pieces like HG grade?
@m.rezapahlevi30577 жыл бұрын
Zekiel Hoang high grade grade??
@outerheaven95467 жыл бұрын
Mass Chunk that's exactly what I was thinking lol
@xlysion-e35936 жыл бұрын
I believer that it would be pretty hard for you to do so tho... I mean it would be too hard unless you have a lots of experience in these kinda stuff
@MegaDoomer1014 жыл бұрын
Why not use a brush? It isn't hard to get smooth paint with overlap, and you don't have to fool with all the tape
@juanalvarado77945 жыл бұрын
What is the Tape called?
@jaysheeler21795 жыл бұрын
Where did you get those mg ex-s waterslides?
@mendosuke7 жыл бұрын
were the white parts already been painted?
@taoako31515 жыл бұрын
whos leg is that? looks cool.
@Somethingwontchange5 жыл бұрын
Nice.. This is good tutorial for me newbie
@OnlyFangsPH7 жыл бұрын
You did not prime your kit before painting?
@shixiongong85174 жыл бұрын
What RG model is that?
@monteiro13457 жыл бұрын
Hands looking like mole claws
@SqualidsargeStudios5 жыл бұрын
interesting vid, but please is there something job related to those nails? like i've seen more people with said long nails but never got to know why.
@ritzroldennalpajora47427 жыл бұрын
so you dont need to prime?or is it necessary?
@aleemlatif92997 жыл бұрын
Ritz Roldenn Alpajora primer makes the paint adhere more to the surface and reflective index and outcome of the final color but it is not necessary..
@enicolas19857 жыл бұрын
what kind of masking tape is that?
@sandrodream54187 жыл бұрын
Question for a big problem . I have a problem with Gundam Rx78 Ver 3 the articulations are very fragile and the Arms and Legs if I touch a bit this parts they fall down and I must re attack every time. How can be solved this big problem ?
@ariq457 жыл бұрын
based on what you ask, you want the joint to be tight? stronger but doesnt defect articulation yes? try to put a glue on it, a strong one. not like UHU, something that contain cyanoacrylate might do. basically you want the articulation still in good position yes? take off the part and glue the loose swivel part, (not the hole where it attached). put a glue on it and be careful. wait for at least 30 minutes till it dry, then put it back , the joint will be VERY tight, if so sand em with nailcutter thing/sandpaper if you have
@ariq457 жыл бұрын
if it got really really stuck because of the glue then try moving the joint a little by little till it became not-so-tight
@ariq457 жыл бұрын
if we're talking abt parts that doesnt affect articulation and it just really like to fell off (like the fist), glue the balljoint on dat fist
@sandrodream54187 жыл бұрын
no, I dont want block the articulations with glue ! I had an idea to change the plastic parts with magnets like in Jeeg Robot that have alll the magnetic articulations but I dont know the real procedure ...how to do ???
@NeoHeirGlich7 жыл бұрын
I wouldn't do the magnet thing just yet. For loose joints you can just coat the joint with future floor polish (now called Pledge Floor Care Multi-Surface Finish). Tightens them up while not limiting articulation.
@daniellau78837 жыл бұрын
why no primer?
@randomdod44804 жыл бұрын
Wow really good videos!
@schloon6 жыл бұрын
Does this guy have a PO box, I'm gonna send him a manicure kit. Hopefully he does a tutorial
@AL-oy6cg4 жыл бұрын
wait did he just paint the parts and didnt clear them?
@HazzardManoj6 жыл бұрын
gibt's in dem loch aus dem der gekrochen kommt keine nagelscheren oder was....
@spckatan7 жыл бұрын
what is the color, for the tamiya paint, have you use ?
Where's the sanding process? And who will first paint the line before spraying? And I must say the gray parts may be good, but the color should be more closer to the white parts. It will make it looks more realistic.
@micp41303 жыл бұрын
The energy level of the video is at a 4, but the energy level of the music is at like a 9. I think it would make for a better video if the audio and visual energy levels where more in line with each other.
@Robsty885 жыл бұрын
great video. I would do coloring first before applying panelines
@GameAndMusicNerd7 жыл бұрын
can u do a tutorial on painting joints. I'm worried the paint would chip veeeeeeeeeeeeeeeeeeery easily
@arthurdub79013 жыл бұрын
Is it just me or do all gun pla builders on KZbin have longer nails than most people? I find myself waiting to cut my nails until I finish applying the decals to my Gundam lol
@xlysion-e35936 жыл бұрын
where can you get the tape?
@HiScoreChef6 жыл бұрын
What kind of tape?
@asian27005 жыл бұрын
www.gundam.my/modelling-tools-sndme-masking-tapes-18-mm-itemid-3625.html there was a link in the info card. But I think tamiya masking tape is good. I recommend the video by scale model workshop called different types of tape.
@curtisgarnier28897 жыл бұрын
and how long do you keep the water slides in the water ?
@DaekTwentri7 жыл бұрын
Usually less than 5 minutes is enough.
@curtisgarnier28897 жыл бұрын
DaekTwentri ok cool thanks
@TsorovanZero7 жыл бұрын
If the water is warm, usually no more than a minute. You'll be able to tell it's ready when you can make it slide around on the backing.
@curtisgarnier28897 жыл бұрын
Kay cool that helps :)
@Mugenstylo7 жыл бұрын
20 secs is enough most of the time
@BussyConnoisseur Жыл бұрын
Yo that news paper panel at 4:08 tho
@actionplatop67085 жыл бұрын
wow cool~
@benadrylthundercrotch71445 жыл бұрын
I didn't know witches did gunpla.
@wpgcelica7 жыл бұрын
Coke nail....
@anthonyj91126 жыл бұрын
that's a whole coke hand
@curtisgarnier28897 жыл бұрын
which gundam is that?
@Gundammyshop7 жыл бұрын
That is MG 1/100 S-Gundam
@oirijal49267 жыл бұрын
great work man
@erk17774 жыл бұрын
dug the music
@jeromesantiago27237 жыл бұрын
so helpful..thanks for this..
@KappazWengz6 жыл бұрын
Wow, u from Penang?
@lurtoff6 жыл бұрын
Love it
@ragingfloof79994 жыл бұрын
Getting some Yoshikage Kira vibes here
@tajasimilah3 жыл бұрын
Lol. All comments on nails Its his lucky charms
@neontetra10006 жыл бұрын
I thought the thumbnail was 2 cool little figures with no faces
@arosas-zero4 жыл бұрын
There's no commentary on the process
@tonyk21826 жыл бұрын
Your are hk man ?
@poshao03257 жыл бұрын
Nice
@marsgaming79146 жыл бұрын
Hi sir would like to ask for permission to post this on my fb account, this tutorial would help a-lot to my fellow builders.❤️
@neonhaze37254 жыл бұрын
Im actually gonna be getting my first ever kit here soon, and was wondering what tools I should get or the best outcome?
@neonhaze37254 жыл бұрын
For not or, sorry for the miss type
@jerrodimus5 жыл бұрын
Good lord.. I've been doing it wrong all this time 😥
@Raspberry_Max4 жыл бұрын
Нанесение декалей - яркий пример того, как _НЕ НАДО_ делать...
@billcypher39425 жыл бұрын
Are you guy just copying others comment or you really have a problem with his nail Cause i dont even know it was there All i see is too much effort and money spent to slightly improve a pair of legs
@paperbag71375 жыл бұрын
Just imagine all of the germs on the fingernail oof
@therecklesswarlock64397 жыл бұрын
ive been masking wrong the whole time! NOOOOOOOOOOOOOOOOO!
@ediblelipstick1096 жыл бұрын
Elliot Lee now im curious about how you do it
@ajihendy10247 жыл бұрын
savage video
@Ueiwbdiaibcisjseduhbaa7 жыл бұрын
freaking nice video..
@GNRLKID4 жыл бұрын
Sorry...down vote just for the nails. Otherwise, very helpful video!
@Ahem20027 жыл бұрын
interesting that he doesn't need to prime it
@victormurillo69566 жыл бұрын
Ahem2002 yeah is that not necessary or what?
@unicorn88w Жыл бұрын
Bang carikan bandai HG astraea bang
@andrewfan_6 жыл бұрын
LOL USES A LEAGUE OF LEGENDS TRACK IVE HEARD THIS SO MANY TIMES I HAVE IT ON MY PLAYLIST HAHAHAHA
@andrewfan_6 жыл бұрын
pretty sure its called Flash Funk
@risue086 жыл бұрын
Always think : all that work just for a small detail