GYEON Q²M Bathe+

[@matty387]

As a hydrophobic snow foam this is a real time saver. Can get into all the grills and tight areas too 👌🏼

[@lesjoseph4709]

Just used this on my car first time today. First class product easy application and good value for money very excellent results

[@JMNTN]

I can’t recommend this enough. I used to spend loads of time and money on all kinds of fancy waxes but nothing gave me better results than this and it also takes literally no time to apply since it’s done while washing.

[@marshprofessionaldetailing9794]

This product and the whole line honestly is amazing. Every time I try something new, I'm hooked.

[@GYEON_official]

Thank you for the kind words. At Gyeon our motto is to let the products do the talking. Nice to hear you appreciate it. Regards, Y.

[@Mogsy28uk]

again very good product and i usually add a small amount to my snow-foam lance for post chemical decon use, as well as main shampoo.

[@autodbacz9131]

The most hydrofobic shampoo ! And that shine is amazing . But this is only shampoo :D

[@Nick-ng5lg]

Love that stuff even when I wash my ceramic coated car for the extra protection 😗

[@themafia33]

how many liters of water for 20 30ml of product? how many milliliters does a pump contains?

[@GYEON_official]

10 to 20ml for a bucket with 10L of water is ideal

[@jezmendoza1718]

@GYEON I have most of your products - everything is top class in my opinion. Just coated my two vehicles in Synchro 50ml kits as well as View and Trim… Then allowed them both to cure in temp controlled garage for 14 days without any outside exposure. I bought foam, APC, Bathe + and Cure. I’m trying to work out what is my best Gyeon wash routine for first wash and maintenance washes? Do I hit with foam followed by bathe+ mit wash and then cure? Or is there a better way? Please give me your advice on optimal combo - I don’t mind if I have to buy bathe as well, I just want to maximise my coating life.

[@yogiayogi]

Whether this slickness protects against nail scratches or something in daily usage?

[@GYEON_official]

If you are looking for the ultimate scratch resistance, look for Paint Protection Film.

[@kia73k95]

Nice product! What is the ratio with water when using foam gun?

[@GYEON_official]

10 to 20ml of product mix in 500ml of water and you are good to go!

[@philipkirschen4354]

@GYEON_official What should be the temperature of the water to which I add shampoo?

[@iakinthos8]

@Gyeon Quartz what is considered a hot panel e.g in summer temps reach easily 35-40 degrees Celsius that's 95-104 F is that temp range a "no go" for using this product on my car?

[@GYEON_official]

If you reach such temperature you probably wash your car in direct sunlight. If you want to safely wash your car then wait for shade or evening.

[@gilbertocharpentier6391]

I agree with Yve, the third method is just crazy cool! I just do not know what is the mixing ratio 1 to 3? I do not want to over spend the miracle in the bottle LOL

[@GYEON_official]

Thanks, rather 1:10 so really a miracle in a bottle. Regards, Y.

[@luiscaldeira7458]

i have used as a normal shampoo but i was wondering how many ml of product for how much water in the lance? seems a great way to give a boost and easy

[@belminzvekic6]

It would be helpful if you guys included information on how many ML of product is included in 1 pump.

[@GYEON_official]

Roughly 1.2ml per pump

[@riyadislam97]

Hey been watching your videos for the past few years and love the content! I would like to know if I can use this soap before polishing the paint, then ceramic coating. Thanks!

[@GYEON_official]

I would rather suggest to use or Bath and even better Q2M Restart wash. It has more “bite” and will remove as much as possible before starting your polishing proces without leaving anything behind. Regards, Y.

[@diegopersichettini6023]

@@GYEON_official does it also help to remove limescale?

[@GYEON_official]

No it does not. Regards, Y.

[@arthurlancelod]

Hello!! Does Combining bathe for suds and bathe+ for sio2 into the same bucket give the same effect? Because bathe is lack of sio2 and bathe+ is lack of suds:(

[@GYEON_official]

Combining both product will dilute properties of one to the other - but yes it can be done. Q²M Bathe+ does produce less suds as Q²M Bathe but it still remains really slick.

[@ΙωσήφΑλεξάκης]

Can I use this on ceramic coated car?

[@GYEON_official]

Of course. It’s a great maintenance shampoo to boost hydrophobicity. Never use it on hot panels or in direct sunlight. Better do a panel at the time and rinse. Regards, Y.

[@Stewy817]

Can this be used on ceramic coatings?

[@GYEON_official]

Absolutely. Works amazing on coated and non coated cars. Regards, Y.

[@AM4N18]

Can you please do a video on Bathe Essence please?

[@GYEON_official]

Coming soon !

[@johnirish4865]

That's such a great product. One quick question, what will be the difference if I snow foam using bath+ or using wetcoat product? which one will be better?

[@GYEON_official]

My preferred one in terms of reaching every part and crevice would be Q²M Bath+ but not everybody has a foam gun. Both serve a purpose. Regards, Y.

[@johnirish4865]

@@GYEON_official Thanks for your response, I really appreciate it.

[@alexisdetailingcarwash]

Can I use this on a foam cannon and wash it normally?

[@GYEON_official]

@alexisdetailingcarwash8192 When used in a foam cannon we advise to rinse for the reason of having a too long dwell time. When you would like to use it that way I suggest to foam and wash a panel at the time but this way efficiency and ease of use should not be your priority. Regards, Y.

[@anon1231]

You use this every wash?

[@GYEON_official]

You can if you want, it’s a great shampoo. Regards, Y.

[@olivierstultiens]

Can you use this every wash(once a week)? Or more as a once a month product?

[@GYEON_official]

Sure you can but it could be a bit overkill so once every 3 washes would be my go. Regards, Y.

[@ryanleasure3670]

I have a brand new car that is fully coated I. PPF and then topped with Xpel fusion ceramic coating. What products do you recommend for this car as far as wash and keeping that ceramic coating working as much as possible?

[@GYEON_official]

We have a seperated PPF line up that has all the products needed to clean and maintain your PPF. Did you check out our amazing website? Here you go: gyeonquartz.com/ppf-collection/ Regards, Y.

[@dimitrisloner131]

Does it add shine like wax car shampoos???

[@GYEON_official]

Yes it does.

[@DavidC1]

Hello Geon, I am a new car detailing enthusiast. I really like your products but am confused on the proper steps I need to take before applying a ceramic coating. Do you have a help line I could call into(USA) or email?

[@GYEON_official]

Your Gyeon distributor in the USA will assist you for sure - shoot them an email at [e-mail]

[@JadoreAllan]

Hi Yves, is this able to use it on matte wrapped cars? Will there be any gloss in it? Thanks in advance!

[@GYEON_official]

Hi, it will not make your wrap shiny, no worries but I would use it a panel at the time and rinse, this to avoid possible streaks, which are easy to remove but better avoided. Regards, Y.

[@pradeepsagwal]

Should we use Quick detailer after washing with Bathe +. How will you rate its gloss as compared to Gyeon Quick detailer

[@GYEON_official]

Quick Detailer vs Quick detailer? As a drying aid both QuickDetailer and CeramicDetailer are great. The slickness of CeramicDetailer is higher and it gives you more then gloss, it adds a layer of protection in terms of hydrophobicity. Regards, Y.

[@pradeepsagwal]

@@GYEON_official ohh I am sorry . Actually I am asking difference between Bathe + gloss and Quick Detailer gloss( after washing with Bathe and quick detailer applied after drying).

[@GYEON_official]

@@pradeepsagwal Did you know we have a enormous FAQ base on our website www.gyeonquartz.com? As well as precise, in depth description of all products offered. We are happy to answer all questions, but frankly speaking, asking for a gloss difference between a shampoo and a quick detailer is asking for something hardly measurable and highly subjective as well. And the usage of a gloss meter might not bring a definite answer as well, since there are way to many variables related to the usage.. BR, Jeremy.

[@pradeepsagwal]

@@GYEON_official right 👍🏻. Means It is close enough . Will be using Bathe + on this Sunday. I have already used quick detailer ( nice gloss)

[@Dav1072]

Hi, how many pumps from the supplied peripheral equates to 20-30ml please? I use about 6-8

[@GYEON_official]

A pump equal 1.2/1.5ml

[@nikolaystoykov9413]

How much Bathe+ in ml to put in the foam canon bottle? 10-20ml?

[@GYEON_official]

Same as in your bucket - 20-30ml for 500ml solution

[@yarinsheiman7789]

Hi! My car is coated with Infinite base 1, and I intend of using the ceramic detailer spray after the wash... should I use bath or bath+?

[@GYEON_official]

I would stick with Q²M Bathe and use once every 3 washes Q²M Restart for some more powerful cleaning. Regards, Y.

[@yarinsheiman7789]

@@GYEON_official Thanks 🙏

[@zacmich6472]

Will it also work on the undercarriage as a salt and dirt repellant in the winter? Can you recommend a dilution ratio for a foam cannon?

[@GYEON_official]

It will help for sure but will need repetition. A 1:5 dilution will work fine. Regards, Y.

[@MAXIMILAN2QAT]

Can I use Bathe+ to maintain G Wet Coat ?

[@GYEON_official]

You can but it makes no sense. Both are hydrophobicity boosters and will add gloss. Different application methods and different ingredients but all with the same purpose. Pick the one you like the most. Tip: mine is Bath+ in a foamer after your wash and then do your final rinse. Regards, Y.

[@schumy8752]

Is this product a good UV protection?

[@GYEON_official]

Bath+ is a slick shampoo with fantastic hydrophobic properties but for UV protection you will need one of our coatings to do that. Regards, Y.

[@user-bc4yc4lv8v]

Will the end result be same as wetcoat or is that more durable?

[@GYEON_official]

Depending of the use of the vehicle - Q²M WetCoat will be more durable

[@seandavies386]

Can you top this bathe+ with cure or is it not recommended as cure should dry on a untreated panel?

[@GYEON_official]

It’s a bit of overkill, not really needed but it can be used. Regards, Y.

[@CemCe]

Can i use Q2m WAX after washing with Bath+ ?

[@GYEON_official]

You could but it’s not the way to go for a good and durable bounding. A clean, contaminant and oil free surface is the base start. Regards, Y.

[@CemCe]

@@GYEON_official okay so, I tell you what I'll do on the weekend. I will wash the car with Bath+ Use Prep after bath+ And Q2M Wax after Prep. (Car hasn't any containments) Could/would it be okay? Bath+ -> Prep -> Wax ?

[@tanganmasservicecentre6990]

Hi.. My car is coated.. Which is the best bathe+ + q2m cure OR bathe+ + ceramic detailer..??

[@GYEON_official]

There is NO best. There a few things that I need to know before giving a right answer. How long ago was your car coated? With what type of coating? But in general Bath+ every 3 washes and the use of CeramicDetailer as your drying aid are always a good choice. Regards, Y.

[@tanganmasservicecentre6990]

@@GYEON_official my car was coated 6month ago with ceramic coating.. Jz want to know which is the high gloss n high hydrophobic, ceramic detailer or q2m cure.. 😅😅😅😅😅😅

[@GYEON_official]

Both are high gloss and hydrophobic. CeramicDetailer is easier to use. Correct application of Cure lasts longer. Regards, Y.

[@tanganmasservicecentre6990]

@@GYEON_official tq so much sir 😁😁😁😁😁😁😁

[@ozzy4556]

My q2m bathe doesn’t became foam even adding more than recommended.what should I do?

[@GYEON_official]

It’s not a product designed to generate foam. You don’t need foam in a shampoo to do its thing. Slickness and cleaning power are more important. If you are looking for foam, Bathe, Bathe Essence or RestartWash are the way to go. Br, J.

[@GYEON_official]

I may have got a bit confused, since it’s a Video about Bathe+. Which product doesn’t foam up? The regular Bathe or Bathe+?

[@ozzy4556]

@@GYEON_official it’s the bathe +

[@GYEON_official]

@@ozzy4556 Ok. So it will not foam up well. It’s just the characteristic of the product, nothing wrong with it.

[@ozzy4556]

@@GYEON_official one more question after using silk dry towel gently for the first time I saw my car brand new car has scratches on the hood and the fender .Is there anything can be done to avoid it?

[@johnnieelement]

Can I use it also to clean my tires??

[@GYEON_official]

To clean your rubber we recommend Q²M Tire Cleaner.

[@U2SuzyQ731]

Just used this! It was Amazing!

[@GYEON_official]

Nice to hear. Give it also a try in a foam gun AFTER you wash. Regards, Y.

[@antoniomarcossenasantanama5159]

top tambem qualidade

[@psycho5553]

My 940 Volvo got a layer of fat after using this, my whole paint work looks disgusting like someone poured macdonalds gravy on it. Really Hard to get of as well

[@GYEON_official]

How much product did you use?

[@psycho5553]

​@@GYEON_official dont know, but did it with my friend who had the same mix we both did it at the same time and it turned out great on his car but my older volvo 940 got like a uneven layer of fat that looked really bad. maybe its better to take even more water when it comes to older paint i dont know tbh

[@GYEON_official]

@@psycho5553 Q²M Bathe+ can be used in 3 different ways - by far the easiest is to apply it via your foam gun, give it a try.