H&R sport Lowering springs on rear 2018-2021 Honda Accord lx on 19x10

• H&R OE lowering spring... 2020 Honda Accord LX 1.5 It’s dropped with a H&R OE Springs .75 all around I felt that it was too high in the back so I bought some used Springs H&R sport Lowering Springs 1.2 and just installed them in the rear to even out the car
I have some editing problems at the end of installation Just put the screws back and on the big screw torque to 51 pounds And tire back and you done Torque tire to 90 pounds
• H&R OE lowering spring...

[@violian5]

I kinda actually miss my 1.5T Sport. Upgraded to the 2.0T Sport a few months ago because I wanted the bigger engine, heated seats, rear seat vents, blind spot mirrors, sunroof, XM Radio, etc. The 1.5T Sport drives a lot better in-town (e.g. slow cruising at ~30mph) because the CVT transmission seems to always be in the correct "gear" - so the car drives very smooth. When cruising in town in my 2.0T at slow speeds, it seems like the 10-spd transmission hunts around and can't make a decision for the correct gear - so the RPM seems to jump all over the place and there would be sudden accelerating jerks when it changes gears. If you like the "whishing" sound of the turbo, the 1.5T is also the way to go - the turbo on my 1.5T was constantly being used when cruising at low speeds. On the 2.0T, you have to drive with a very heavy foot to get that turbo spooling up (so usually, I don't hear that "whoosh" from the turbo on my 2.0T unless I'm speeding up to get into the freeway. Once the 2.0T goes above 40mph or so on a freeway, I prefer the 2.0T over the 1.5T. So my conclusion? 1.5T ALL THE WAY if you like cruising around in-town, and 2.0T if you like going fast on the freeway or track.

[@JRod.Cuztom]

Thanks for the input good to know I was actually thinking of getting 2.0 too. But I’m more of a cruiser than a race

[@stunna6572]

when around town and causing at lower speeds, try putting the 2.0 in Econ mode. I believe it dummies down the throttle and it smoothes things out somewhat at lower speeds

[@chalelu]

@@stunna6572completely destroys your range

[@montrez1988]

Can't beat that 2.0T

[@-Arkelon]

Honestly I liked more the way it was ! Higher on back .

[@bigbad143]

Love your car, I just got a 2019 1.5T and absolutely love it. I was also looking at the eibach springs. Could you tell me how the car rides? I’d like to keep it as close to the stock ride as possible but close those gaps just a little bit. Thanks

[@JRod.Cuztom]

Pro-kit fells like stock bro

[@DarrinLintz710]

Not many Obsidian Blue out here!!

[@alexweiss6041]

I have the car it still stock like w h at you done with yours

[@earcandy76]

Thanks for the video man....you cleared some things up for me..Just want to make sure. The Grey Sport is a 1.5 on the Eibach Pro kit with the .6F and .8F. I have been fight for a few months now on how it will look in the front since its not the same measurements. What size wheels and tires are you running? I would love to hear back man as I am going to move forward soon....Thanks again.

[@JRod.Cuztom]

Wheel 20x9 +35offset 245/35r20

[@earcandy76]

@@JRod.Cuztom So I will show I little more gap with the .06F .08R. I am still running the stock sport wheels Do you have a Video on that car?

[@JRod.Cuztom]

@@earcandy76 I have a lot of video of the car with eibach spring but it has 20s may tou should look into the h&r sport spring 1.2 drop it looks good with stock wheels

[@JRod.Cuztom]

kzbin.info/www/bejne/oIWmqZSAg8ekg5Y

[@earcandy76]

@@JRod.Cuztom Thanks....You wouldn't happen to know how that 1.2 H&R Ride will be? Saw a post that said the front end is really bouncy

[@vce.john1734]

I was thinking of lowering my 1.5 but since I go to places have shitty driveways I think I can’t because my local stater bros store have two worse entrance and exit because my current accord isn’t even lowered it still scrape so I have Angled the car to get in and out I wonder how bad when it lowered.

[@JRod.Cuztom]

True you got to do what works for you bro

[@vce.john1734]

@@JRod.Cuztom true but I might end lowering my car anyway lol so there no choice of complaining.

[@Trxste]

Nice bro keep it up

[@Dondon-fg5sk]

Hows the ride quality and and noise from springs . ...I used h&r on my 2014 accord and the ride was smooth but when car is loaded the springs touched and made alot of noise. This springs look different.

[@JRod.Cuztom]

Good no noise here is a second opinion kzbin.info/www/bejne/nJ_Qop6DrMurqNk

[@christophermartinez5314]

Excellent video

[@JRod.Cuztom]

Thank you I try

[@bj10jgo]

No plans of putting a camber kit or alignment done after putting the springs? I notice the rear tires are caved in. That might cause uneven tire wear

[@JRod.Cuztom]

Na maybe after she goes through those tire and how fast the wear.. thank you

[@naughtysauce4323]

The front will always be lower than the back, every car I've lowered with springs has been like that.

[@JRod.Cuztom]

Yea

[@naughtysauce4323]

@@JRod.Cuztom If you want even, you're going to have to go coilovers

[@JRod.Cuztom]

@@naughtysauce4323 true kzbin.info/www/bejne/q5_dqpWql6ujaKM check this video

[@andrewlomeli6734]

Aye it’s my car lol 🤣 came out clean boss, nice meeting you 👏

[@JRod.Cuztom]

Thanks 👍🏽

[@DannCv1_]

If you get foglights make a vid of installation i have the same model 😎😎😎😎

[@JRod.Cuztom]

Yea for sure

[@DannCv1_]

@@JRod.Cuztom 👌🏼👌🏼👌🏼🙏🏼

[@JLY.4]

I have a 1.5T 2018 what do you recommend H&R or eibach? I want a lower look to it and good performance hopefully you reply thank you 😃

[@JRod.Cuztom]

Ill go h&r

[@JRod.Cuztom]

kzbin.info/www/bejne/oIWmqZSAg8ekg5Y 1.2 drop like 1”1/4 if you want lower ⬇️

[@JRod.Cuztom]

Lower 1.6 in front 1.8 in rear www.ebay.com/itm/195104042858?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lTOa52mSSDu&sssrc=2349624&ssuid=yUPm5jVIQ8q&var=&widget_ver=artemis&media=COPY

[@JLY.4]

@@JRod.Cuztom thank you very much for replying back, I might pull the trigger on the h&r

[@kortam6065]

How about the ride h&r vs eibach?

[@beekaye1496]

Nice accords

[@bennycarter1483]

On the blue one, are the exhaust tips painted black?

[@wyattsnow4923]

What lowering springs were used on the grey one? I would like my 2019 Honda Accord Exl hybrid to have the same look

[@JRod.Cuztom]

The gray one I have the eibach pro-kit .8in drop on rear .6in front on 1.5t

[@JRod.Cuztom]

Is it a 2.0?

[@JRod.Cuztom]

kzbin.info/www/bejne/jKCQlnymoMymhtU

[@wyattsnow4923]

@@JRod.Cuztom yes 2.0 hybrid

[@JRod.Cuztom]

Check out the video I put

[@xdramax92]

Where’d you get your front license plate holder?

[@JRod.Cuztom]

Tha blue is Actually holded by zip ties but the gray one I have a video on it the link is in the descriptionkzbin.info/www/bejne/fpW3mJiceKmCbrc

[@alejandroarvizu1760]

Hey bruh , when you change the rims is there a problem with the TPMS?

[@JRod.Cuztom]

No they don’t have that

[@glendavid3648]

nice, what specs on the wheels?

[@JRod.Cuztom]

19X10 35mm offset . 9six9 wheels

[@-Arkelon]

@@JRod.Cuztom 35mm positive or negative ?

[@JRod.Cuztom]

@@-Arkelon +

[@CJ-nq9xf]

What’s the actual fitment bro on blue one?

[@JRod.Cuztom]

19x10 35mm offset square setup on tires 245/40r19

[@jrjr8738]

Can I do this with my stock struts ?

[@JRod.Cuztom]

Yes

[@jrjr8738]

Thanks bro

[@Dripgodbaby]

Hey does anyone know if u could put a exl radio in a lx 🧐?

[@JRod.Cuztom]

Na don’t know

[@ruggedman20]

Whats the rim tire setup??

[@JRod.Cuztom]

19x10 35mm offset. 245/40r19

[@Hondeezy_1.5T]

Can I buy your rims

[@tavoojamz]

What brand are the wheels?

[@JRod.Cuztom]

This wheels are 9six9 wheels 19x10

[@eduardogonzalez9379]

what color is that car

[@JRod.Cuztom]

Obsidian blue