Haas Lathe Soft Jaws, Boring Rings, and VPS Templates - Haas Automation, Inc.

We've just added lathe soft jaws and boring rings to the Lathe Workholding category on HaasTooling.com! We've got a wide range of jaw sizes to fit chucks from 5" to 15" in diameter. There are square and pointed jaws in both aluminum and steel, as well as aluminum pie jaws. And we're carrying two different styles of boring rings to give you options for how you clamp the jaws as you cut your jaw profiles.
And then to top it off we've created new VPS "Jaw Boring" templates that walk you through creating the code to cut your jaws. These include options for 1-step and 2-step jaws and also the chamfering and back face reliefs that make soft jaw profiles fully functional.
Product Specialist Bhop Singh introduces us to the various jaws and boring rings and then walks us thru programming a 2-step set of jaws using the VPS template.
Links to the Lathe Workholding pages on HaasTooling.com where you'll find Soft Jaws and Boring Rings:
www.haascnc.co...
www.haascnc.co...
www.haascnc.co...
If you don't have these VPS templates on your lathe (and it has NGC software release 100.21.000.1130 or later) you can download and install the templates from the Boring Ring webpage.
Check out the link below that details how to install new VPS templates:
www.haascnc.co...
Click below to reach of "How to Cut Lathe Soft Jaws" videos:
• How to Properly Cut La...
• How to Properly Cut La...
Don’t miss any Haas videos. Click here: www.haascnc.co...
Need more reasons why you should consider a Haas? Check this out: www.haascnc.co...
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!
Follow Haas:
Facebook - / haasautomationinc
Instagram - / haas_automation
Twitter - / haas_automation
LinkedIn - / haas-automation

[@markterryberry4477]

Game changer. These styles of rings have made my job so much easier over the years!

[@geoffgreenhalgh3553]

When I worked the SC40 we didn't have that option, we bored them manually. Great vid, thanks. Geoff, UK.

[@kurtclark8560]

I love the idea of the templates. It would be great to have VPS templates on the mills for cutting dovetails into the stock for 5 axis work.

[@rohanroyroy3883]

Very Good informations🙏🙂

[@brandonreed7046]

Great Job with template and video.

[@mukundmistry1661]

Nyc explain with wonderful example Sir

[@jasongreenawalt2632]

Is there a way to add these templates to a 2019 ds30y with the ngc or will it require an entire software update?

[@Chris_Conjure]

Thank you. I can’t wait to make some fresh jaws. How would you go about making smaller diameter jaws like a .625 diameter?

[@zyndapp800]

This is very nice and informative video, but how do you cut ID jaws? No possibility to use such ring...

[@haasautomation]

zyndapp800, Check out our Cutting Lathe Soft Jaws Part 2 video: kzbin.info/www/bejne/Y3LcfoSEpMZ1oMU . . . starting at around 2:20 we talk about using a scroll style jaw boring ring which can be setup so that it clears the outside diameter of the jaws.

[@Black08Chally]

Hmmmmm.....need to check if these are on my TL2!

[@Black08Chally]

The programs weren't on my TL2, but you can find them on the Haas tooling page, if you go to where they sell lathe jaw boring rings. The instructions worked, I have the template, but it doesn't show like when you normally select a VPS template. The instructions tell you to press F1, this makes it visible. Now to buy/make some soft jaws for my Samchully chuck!

[@olegevstigneev5367]

Грамотно,кулачки одни ,а сделать можно обе стороны детали.

[@ОлегВятич]

Можно расточить с умом и на две детали, на два установа: на зажим - 2 и на разжим - 2.

[@ОлегВятич]

Прекрасно! Россия и США - должны сотрудничать! Голосуйте за Трампа!