Hallberg-Rassy 312 "Ellös": INSTALL THE DOMETIC COLDMACHINE CU55 - KIT

[@johansporrong594]

Very good instructional video. Have not been abel to fiende this with Hallberg Rassy.

[@sea4see]

Ciao John! I speak with HR they told me they follow the outside coi tour of the boat.. I try.. result doesn’t work😩

[@daviddailey4959]

I have said it multiple times but you attention to detail is unparalleled. Looking fantastic!

[@sea4see]

Thx David!!! I try to do the best I didn’t wan come back to what already did!!

[@mikewillis2934]

Superb quality work

[@sea4see]

Thx Mike!

[@normanboyes4983]

That was a grand installation job, your attention to detail is outstanding. If the HR factory watched your videos they would find a new standard to aspire to.😉

[@sea4see]

Thx Norman! They follow my video I know for sure .. someone told me that work on the factory....

[@edwinfennema1886]

You are a man of perfection. So nice to see how accurate you work.👍

[@sea4see]

Thx Edwin!!!👍🏻

[@belledetector]

Nice work Gabriele. I like your idea to install a sacrificial mahogany or teak plug protecting the wall by the foot pump. You will avoid many scratches, and in 10 years you can just renew the plug if necessary. Good thinking...

[@sea4see]

Hey Friend! That was my idea after see what happen to the wall....

[@anthonymcewen-smith200]

As always, great work. You have a wonderful yacht.

[@sea4see]

Thx Antony

[@w1cdo]

Wonderful work. I look forward to your episodes every week.

[@sea4see]

Many thx John!

[@christophvoigt-hoffmuller3256]

good day sea4see, thank you for your great films. I am always addicted to the new films and I'm particularly grateful for them in this extraordinary time. Your boat will be much better than the original. I have an HR 353 myself and have received a lot of help from you that I could apply to me. Should you ever come to the Baltic Sea I cordially invite you to Rügen, here is my boat. I live in the middle of Germany in the near of Weimar here you also invite. Thank you very much Christoph ps. my English is bad,

[@sea4see]

Hey Christoph!! Thx for write me ! Happy you like my channel and help you in some task!! Would like to come in Baltic and for sure a tell you when!! Now is quite impossible 😩! Take care

[@georgesbonellodupuis8245]

Well done. Pure perfection.

[@sea4see]

Thx Georges!!!!

[@paulbrown2971]

As usual, great attention to detail and a wonderful finish! Complimenti!

[@sea4see]

Thx Paul!!!!👍🏻

[@benlindner5285]

Gabriele it is too late now but if you ever need to change your refer system you should consider using a holding plate refer. It is much more energy efficient. Also the plate is easier to install than the evaporator and it is more durable. The previous owner of my boat used an evaporator system in very hot areas of Mexico, however she was unable to make enough solar electricity to keep the refer running. So she switched to a holding plate refer and it used half the electric! The company that made the system in the US is Technautics and they ship all over the world.

[@sea4see]

Hey Ben ! Thx for tip, I saw that sistem but the Price here in Italy is probably double!! Need to pay also tax of importation 22% ....we will se in the future! But thank for the website I bookmarked it!!!

[@Scramasax]

Looking great once again! That one unconnected pin in the fridge compressor is for a cooling fan (marked - F). I was actually surprised that the unit did not have one as standard. I installed that same compressor in my previous boat and it came with one. You can boost the efficiency some what if you squeeze a computer fan between the protective metal grille and the condenser. Get a low noise one from a local computer store... :-)

[@sea4see]

Thx for the tip!!!!

[@Scramasax]

@@sea4see My current setup is at least 15 years old and did not have a cooling fan. I installed one last summer for it. Expecting it to make quite a difference, since the compressor is located in a small space.

[@Kustoden]

Great video! A question: I installed the same kit a year ago but now find it wont cool anymore. It turns on, the fan spins and compressor gets warm - but it does not cool. Any idea why?

[@sea4see]

check the gas if is present….

[@brucekratky7993]

Another sweet job. I never feel good about hearing profane language from someone when they are struggling with a frustrating project, on the upside though, at least I know I am not alone. 😉

[@sea4see]

Ahh ah ah sometimes happen ...

[@bradbusch9585]

Great job now I know how to make a refer

[@sea4see]

Thx Brad!

[@dometicitaly8347]

Thank you very much for your review! I shared this video also on LinkedIn. See you to next adventure! ;-)

[@sea4see]

Feel free to share I like the products

[@micheleannunziata6804]

Hi Gabriele, great job!! Why did you have a so huge hole in fridge box before the system installation? If it's an orginal setup It is unusual.

[@sea4see]

Hey Michele! I found like that probably from factory

[@brunoubaldini6288]

Ciao Gabriele. Bel lavoro. Finalmente ci hanno mollato anche noi. Da domani potrò completare i lavori sulla mia barca a Monfalcone per poi vararla. Non vedo l'ora. Sono sempre interessato al tuo vecchio sprayhood. Puoi, quando sei comodo, mandarmi le misure dei vari pezzi (centrale + 2 +2 laterali) che cerco di vedere se posso riciclarlo (il sistema sulla mia barca è di inserire il paraspruzzi di stoffa in una rotaia curva...). Quando finisci i tuoi lavori? Ormai manca poco, credo

[@sea4see]

Appena riesco ti mando i dati, prossimo anno il varo purtroppo...

[@brunoubaldini6288]

@@sea4see Ma come mai? Il Veneto ha mollato sui lavori in barca e anche la nostra regione. E dal 4 maggio ci sarà ancora più respiro. Sei così indietro coi lavori? Mi pareva tu fossi agli sgoccioli. La barca viene su benissimo. Credevo mi potessi venire a trovare a Trieste, all'Y.C.Adriaco, dove, saresti mio ospite gradito. La traversata è di meno di 50 Nm

[@sea4see]

bruno ubaldini ah ah ah magari .. il varo e per il prossimo anno molto da fare ancora... tra cui il motore da acquistare.. visto il periodo meglio aspettare...

[@Rodrigorosa1969]

Bello Lavoro 👏👏

[@sea4see]

Grazieeee !!!

[@dochonk961]

You pay attention to the details, very nice. A question: what kind of coffee maker do you want to use on board? 12v, or Bialetti, or something else?

[@sea4see]

Manual one off course! Bialetti!!!

[@lennartpettersson6075]

Hi Gabrielle Why are you using 230VAC to drive the fridge when it runs on 12V?

[@sea4see]

When in marina I prefer to use the power supply!!!

[@guillermomengel8105]

Ora puoi bere una birra freddo!!! eccelente!

[@sea4see]

Ah ah sure!!!! 👍🏻💪🏻

[@scyz2807]

Another fine video Gabriele! But I was surprised by the frustrated "F*ck that I heard. Although most of us know, while doing some project, that we too have yelled some words that would not be good for mixed company. So it is very understandable to most of us. And I am wondering, is F*ck an English word you know, or is it commonly used in Italy. Is there a similar Italian word? Next thing - I don't think Ed visited you at all in this video! YEA! I wonder, is Ed really dead? lol Keep up the good work! Scott W

[@sea4see]

Sometimes happen! We use in Italy to be more posh...🤣

[@claudiocorsetti7104]

genius

[@sea4see]

Grazieeee

[@silvanocometta9760]

Ciao. Dato che il compressore del frigo farà certamente condensa, posiziona i cavi elettrici sopra il compressore. Saluti. Silvano

[@sea4see]

GraziexSilvano!!!

[@dhamma58]

It was hard to see if the 220v cable was touching or set away from the coils ...they may not actually be that hot, but the cooler the wire, the more efficient it can carry a load . Also, they will have the allowable temperature maximum printed on the insulation..no wish to lecture...just basic info. As I am writing this, English curses come through the speakers....most impressive, completely construction appropriate!

[@sea4see]

Thx I read the temp and the coils are quite cold...

[@Sciolist]

Most things electronic go clean over my head but other would be more informed.

[@sea4see]

Ah ah Mine no!!!