🎥 Ep2: Wire Allocation and Grouping | DAVE's WIRING VLOG

#daveswiring #racecar #haltech #vlog
Welcome back to Dave's Wiring Vlog! It's time to figure out what each wire is supposed to do. Dave prints out an input/output report diagram from the ESP software and assigns each wire in the harness to its rightful place on the diagram. This step is super important as this is where we decide what function each wire in the harness will control. Dave then puts the wire in groups based on their functions and their location in the car.
------------------------------------------------------
HP Academy Pro Wiring Courses:
Wiring fundamentals: bit.ly/HPAWiringFundamentals
Club level Wiring: bit.ly/HPAClubLevelWiring
Professional Motorsport level Wiring: bit.ly/HPAMotorsportWiring
-------------------------------------------------------
Links to products used in this project:
Haltech Elite ECU + Premium Wiring Kit :
www.haltech.com/product/ht-15...
www.haltech.com/product/ht-07...
www.haltech.com/product-categ...
EFI hardware: www.efihardware.com/
Syltech - www.ebay.com.au/usr/autosuppl...
RS components: au.rs-online.com/web/p/crimp-...
Connector-Tech ALS: www.connector-techals.com.au/
Tesa Tape: www.tesa.com/en-au/industry/t...
Tempco Crimpers: temcoindustrial.com/temco-hyd...
3D Racing Solutions: 3dracingsolutions.com/collect...
Power probe: www.powerprobe.com/
------------------------------------------------------
Relevant Videos:
How To Crimp Like A Pro: • How To Crimp Like a Pr...
How To Wire an LS Engine with a Terminated Harness: • 💬 How to wire an LS en...
How Relays Work: • 🛠 How Relays Work | ...
How to Wire Your ECU: • 6 Ways to Wire In Your...
---------------------------------------­---------------
Don't miss out on our next video - subscribe to our channel.
---------------------------------------­---------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: / haltechenginemanagement
Instagram: / haltechecu
~-~~-~~~-~~-~
WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
• 🏅 Jason Waye's Barra P...
~-~~-~~~-~~-~

[@haltech]

Welcome back to Dave's Wiring Vlog! It's time to figure out what each wire is supposed to do. Dave prints out an input/output report diagram from the ESP software and assigns each wire in the harness to its rightful place on the diagram. This step is super important as this is where we decide what function each wire in the harness will control. Dave then puts the wire in groups based on their functions and their location in the car. Missed Episode 1? Watch it here: kzbin.info/www/bejne/f6Gxl4WXgsSDZpY --------------------------------------------------------------- Our friends at HP Academy have given us a discount code for anyone interested in their wiring courses: Wiring fundamentals: bit.ly/HPAWiringFundamentals Club level Wiring: bit.ly/HPAClubLevelWiring Professional Motorsport level Wiring: bit.ly/HPAMotorsportWiring Enter code: 48V7KF to get a $70 discount. How good is that!

[@fellowship_of_the_goat]

Thank you, Saucy Dave, for being so helpful. I'm going to start wiring on my shitbox soon and this is just what I need.

[@nickg4135]

thats really cool how you can grab a wiring guide at anytime you need to, looks like it'd make troubleshooting a tonne easier

[@bryanduggan]

Dave is great 👍 loving his page up hand

[@mattn6368]

Loving this series so far, keep up the great work Dave!

[@s4060]

Awesome! You guys are awesome! Love the fact that you work with MCM as well. Two GREAT Aussie companies!!

[@circuitspecdc1928]

Awesome!! Looking forward to part 3

[@martinultimatevw3779]

Such a awesome series! Informative and fun! With these i can almost tackle my own standalone ecu 👌👌👍

[@89_triumph]

Thanks, looking forward to giving this a go..

[@motoray69]

Keep em coming!

[@mickmiddle3331]

Well Done Dave.

[@BjornFSE]

good stuff

[@Add12this]

Some cheeky MCM on the laptop?

[@AtreidaeChibiko]

Just checking he looked okay in the MrPoo video

[@aaronhogan2371]

#Page up!

[@MattBerrymotorsport]

"when you are frustrated it is always good to just stop" and have a sleep in the back of your car lol

[@frankboother5002]

Hi Guys, getting ready to build wiring ISO report for my S6 RX7 engine in a Rx4, can you I make up my own wiring allocation layout, i as still have wires left over I would like to use, I have a 2500elite. So how do I find and use a blank template and not a generic Map/ allocation. Not great with computers, but understand what doses what and how is works.

[@AtreidaeChibiko]

Funny sleeping in the back of an XD... He might have been conceived in one :P

[@haltech]

LOL - that might actually be true!!!

[@grantsnell6782]

When did mudguards become fenders in Australia? ;-)

[@haltech]

right around the time when trunks became boots.

[@mattn6368]

And also when bumpers became bars. In America they call them bumper covers! It's not covering a bumper, it's covering a crash bar...

[@saccaed]

How many of you were watching youtube through the laptop on the table.

[@jasonkurczewski4504]

What is the benifit of using the step motor wire rather then the normal DPO 5 for the fuel pump? All i can think of is the ability to use a positive trigger to the relay rather then a negative, but not sure on the benifits of this.

[@AtreidaeChibiko]

I think it's so he can use multiple outputs for things like staged fuel pumps.

[@rimmersbryggeri]

You don't look corona about the food delivery. You look more VB.

[@haltech]

Not sure if insult.. orrr.....

[@rimmersbryggeri]

@@haltech It's ok to be Bitter about isolation. Definitely not an insult.

[@Takeitlightly6]

Why does everyone at Haltech talk in the same tone, accent and volume? Everyone picked from the same school?

[@haltech]

Dunno - We're all from the same part of Australia and we spend a lot of time with each other, maybe?

[@larrybushwacker]

Tell me that's not an ls in a Ford🙏

[@haltech]

That's an LS in a Ford.

[@larrybushwacker]

@@haltech unsubbed now👋

[@mikechater8780]

@@larrybushwacker Bye

[@bigmuz_pilot]

@@larrybushwacker What a knob you are

[@p9raceway759]

Greg B it’s not an airport. No need to announce your departure.

[@seanohutton3185]

Loving the video, the tech, it's all on point, love it!. But... Ok, Honest Answer... No Avoiding it or other BS. You have put it in the video, people treating you like "the plague", avoiding you, passing shit with a broom, you telling people "Wash Your Hands" and so on. Why?. Exactly Why?. How come people are treating you like you are infected?... It's well Over The Top for the Social Distancing requirements, even at the panic moment at the start of Covid Times. WHAT GIVES?... What's the reason for such measures from such a wide spread company as Haltech?.

[@haltech]

Honestly... - we're just trying to lighten the mood up a bit:)

[@seanohutton3185]

@@haltech Oh, cos Honestly I was genuinely concerned there...

[@haltech]

Any excuse to poke Dave with a broom stick....

[@seanohutton3185]

@@haltech as long as he isn't really sick tho... And it's just taking the piss, that's fine, I'm all about having a laugh!. He isn't exactly as "integrated" as the ol Tuning Fork, but I enjoy watching his content, I'm enjoying this series too. Not to mention that I feel vindicated when he preaches about the need to do your wiring correctly and about how important it is to ground effectively!.

[@AtreidaeChibiko]

@@seanohutton3185 And that wiring is only as scary as you make it. Yeah you need a few tools and know how. But it's no different to anything else we learnt how to do in cars