Ham Radio - The GOOZEEZOO(a.k.a. Hamgeek HG-20a) magnetic loop antenna

Рет қаралды 7,532

Күн бұрын

Trying it out, doesn't work very well.. Nice hardware though.
If you like my videos, please subscribe here:
www.youtube.com...
If you want me to keep making more videos like this, consider becoming my patron at Patreon: / kb9rlw
Discuss this and other videos on Facebook:
/ kb9rlw
If you want to give me a tip, patreon donate page is here:
www.paypal.com...

Пікірлер: 92

@AmRadPodcast Ай бұрын

I appreciate you spending your own money on reviewing this for us. No loop with tiny caps and a choke like that will perform as they claim. Folks are better off bending some copper by hand. Doesn’t have to be pretty, but does have to be efficient! Have a good weekend and thanks again! -Derek

@nigelgough1238 Ай бұрын

Hi Kevin, good to see you looking well. Thanks for the video.

@timmcilraith8762 Ай бұрын

Hope we have our "good old Kevin" back for good. Much missed.

@DM-fz3ly Ай бұрын

for the $88+ dollars I would package it up and return it! Amazon "free returns" won't cost you a penny

@PaulaBean Ай бұрын

I appreciate you took the effort to draw a schematic. Now I can build and try such a control box myself.

@loughkb Ай бұрын

Well this is probably not the best design. But you can get the schematic for the MFJ loop tuner, which is similar. They have a couple of inductors in line with The coupling capacitor, might make the difference.

@Oodle-ox2vf Ай бұрын

Lookin better man. Happy days. 🙂

@dougtaylor7724 Ай бұрын

Two thoughts. Take a dremel tool and cut the back open. Shorten the wires and cover the hole with a piece of flat plastic and a dab of silicone. Second is use the loop for AM radio station listening at night. I bet you can get so many stations out there they overlap. The loop might give you directional discretion. BTW, you look great Kevin. Look like you old self. Glad to see you back and feeling better.

@johnpawlicki1184 Ай бұрын

I have a very wide band antenna that handles 100 watts and matches 1:1 across HF, VHF and UHF bands. It sits on my shack desk. It is, of course, my dummy load. Great video.

@norrinradd8952 Ай бұрын

Looking better, I hope you feel better as well. It's difficult to know for sure if this antenna is intentionally bad with intent to maximize profit or perhaps it is defective. If you had the time perhaps you could improve this antenna and do a video about it. Thank you for sharing.

@traveller-nl Ай бұрын

Tnx Kevin. Nice parts though. Good Hardline for your other loop, nice box… Hmm just needs an inductor and you can make a manual T-match or even a Pi network out of it. Maybe even a pre-selector…? Plenty of opportunity to use your VNA with such projects.

@DanielFlores-K7PKB Ай бұрын

Great to see to back! Thanks for the info about this antenna.

@ominkan3129 Ай бұрын

Thanks for the video. Really gives insight to what to pass up. It looks cool but that's all.

@Philip-KA4KOE Ай бұрын

Always love your preroll. Glad you're better.

@georgenunes1614 Ай бұрын

Best wishes for a full recovery Kevin! You are looking and sounding better every video! Sorry about the loop, we all have parts in our junk boxes from wished successes…. ham radio brat

@EricMarshallva Ай бұрын

good to see you on

@jorgecuadra9798 Ай бұрын

Kevin. Nice to see you again. I hope you're ok in your recovery. Regards from Santiago of Chile. 73's CE3PSD

@hectorpascal Ай бұрын

Don't give them ideas Kevin! Even with the controls on the bottom of the box, the "improved" performance will still be pretty awful! Nicely made main loop though... (and if you put that lossy thin coax feed line, the SWR will look even "better"!)

@raylowe3324 Ай бұрын

Nice looking dummy load. The loop coax is probably the only thing worth using.

@lilblackduc7312 Ай бұрын

Thank you, Kevin! Take care of yourself and "Keep the Faith"! 🇺🇸 👍☕

@Steve-GM0HUU Ай бұрын

👍Thanks for video Kevin. I think your idea to repurpose the parts is good.

@donnakano3697 Ай бұрын

Thank you for putting out objective, quantifiable reviews.

@WECB640 Ай бұрын

Hi Kevin. This was a very good video and test of the GOOZEEZOO. Those tiny variable caps and thin wire interconnects can't possibly handle more than a few watts of RF because (as you know) all magnetic loops have very large currents and voltages on the loop. I would check the resistance of the loop with a bench supply and then read the mv drop with a DVM across the loop and compute via Ohms Law. it should be about 0.1 ohms or less. Let's also take apart that faulty balun and see why it adds loss and broadens the Q of the loop. Looking forward to the next video. Glad to see you're feeling stronger as time goes forward. 👍73 OM

@andrewhill2556 Ай бұрын

Great your back doing videos. I've seen other reviews on these loops and none of them good. Fred in the shed had issues trying to tune 11m and I think he did a mod and it worked a little better ? All the best Andy M6APJ

@Darrell_Coquillette Ай бұрын

It looks like it's good quality. Now I want to see Kevin rebuild it to work the way it should. Thanks again for the videos and I hope you're doing well. 73 de N9JOD

@loughkb Ай бұрын

I was thinking about coupling it with a coupling loop and feeding it that way. But the small light duty capacitors they use would arc over like fireworks. I don't think there's any hope for the design. At least not with the hardware they included. I might turn the box into a zmatch antenna tuner for QRP. And use that nice coax loop on one of my home built loops.

@bradenglettkd8zm69 Ай бұрын

Great video, Kevin. You, no doubt, saved a lot of operators from buying junk. Maybe it's OK for receive only, but so is a 50' length of wire! 😀

@g1jee 23 күн бұрын

Thanks for the review.

@KG5RK Ай бұрын

Hello Kevin, Glad to see you up and about. I think I've seen better performance out of DUMMY Loads ! Mag loops are supposed to be "HI Q" antennas. As I recall, HI-Q means NARROW Bandwidth. So their claims of service from 40 Meters to 70 CM just validates it is also LOW Q... A HIGH DOLLAR DUMMY LOAD. That piece of Hardline loop looks impressive :-}

@tomtwist1081 Ай бұрын

I think you forget that a magloop needs to be tuned to the operating frequency. So the coverage says little about the Q.

@leehyde6610 Ай бұрын

Glad to see your alive and well!

@raymondmartin6737 Ай бұрын

To Add, I bought a UBeesize CT-50 Tripod for about $15.00 additional for this junky loop. Thanks for your review and warning.

@AlanElBee Ай бұрын

At that price, you could crank up the transmit power and do a "smoke test" 😂 73, K7KS

@bill-2018 Ай бұрын

It does show that a bought aerial doesn't mean it outperforms a home made one. I've made five attic dipoles 20m to 10m, an outdoor 60m inverted vee, two loops for h.f. and a copy of a thing which was around in the 1960's and 70's called a Joystick and 26 foot of wire which tunes 160m to 10m using a supposedly non-working MFJ 16010 tuner I was given. It worked for me. It did stop working after a trip to Wales and I found a wire not soldered and soldered it so I guess vibration moved the unsoldered wire. G4GHB.

@wa6gxq Ай бұрын

Good to see you 73

@raymondmartin6737 Ай бұрын

Yes, I bought a similar Goozeezoo look like this and it doesn't work well too. It makes a good table top display

@tommiehinman1349 Ай бұрын

LoL I can see why you didn't include a link to purchase

@loughkb Ай бұрын

Yep, this review turned out to be more of a warning. Ha

@raymondmartin6737 Ай бұрын

Indoors, I could hear a strong shortwave signal on 15.770, WRMI in Florida

@RickGreenPhoto 26 күн бұрын

Thanks for the warning.

@JT-py9lv Ай бұрын

*Thanks for taking one for the team.* Need to stay away from this one for sure !

@chrisherd991 Ай бұрын

Thanks for this.

@DonDegidio Ай бұрын

Hi Kevin, Would be interested in how the coax loop works on your homebrew loop. Might not be a total waste of money. 🙂 Stay safe. 73 WJ3U

@raymondmartin6737 Ай бұрын

This really takes the user for a loop

@robincross4625 Ай бұрын

It sounds like RG-174. Look it up 0.1 inch OD. 2.8 mm sounds about right.

@JennyEverywhere Ай бұрын

I never could make a contact with the stupid loop. I got better results on my own homebrew loop.

@davidsradioroom9678 Ай бұрын

Nothing ventured, nothing gained.

@W3OY-RAY Ай бұрын

I would return it too.

@MegawattKS Ай бұрын

Excellent video and tests against the other antennas! Thanks. On the issue of why the efficiency is low, I think its got low-Q capacitors. They're AM radio receiver caps. At this antenna size (2m circumference on 20 meters), the theoretical Q of the resonant loop (X/R) is likely about 2500 and the resonating cap Q should be very high (maybe 5000+). But then tuning would be very sensitive and arcing would likely result on transmit. As is, its still maybe a good receive antenna though (background noise is usually at least 20 dB above theoretical limits - so an efficiency of 0.01 would be fine 🙂) I'm curious. What kind of caps do you have in your homebrew loop (and how sensitive is the tuning)? And is the diameter about the same?

@loughkb Ай бұрын

The homebrew loop is fully covered in two videos. Look back about three videos in my channel and you'll see building the small magnetic loop. The description references the design video from last year with all the details.

@WHNorthcote Ай бұрын

Of all the stupid names for a company, this has to be in the top ten.

@pasixty6510 23 күн бұрын

On HF it doesn’t outperform a dummy load that much and on UHF/VHF every loop does better. So…no no no!

@kenwezeman7827 Ай бұрын

I didn't think it would work just based on the claimed specs.

@KeepEvery1Guessing Ай бұрын

The box and capacitors might be a basis for a QRP Z-match. And check the skinny feed line COAX with you VNA before you toss it. Yes, it will be very lossy on VHF/UHF, but might be acceptable on the lower HF bands, or for cutting up to make short jumpers.

@loughkb Ай бұрын

Yeah I was thinking along the same lines with that box, a QRP antenna tuner. Short jumpers is an interesting idea with that coax. In lieu of antenna switches at my desk, I've been thinking about making a small BNC patch panel. Bring the antenna tuner in and out, the SWR meter in and out, the antenna feeds, and the radio feeds all up to BNC connectors and then just using short patch connect cables to patch things the way I need at that point. Much more flexible than trying to do things with multiple antenna switches.

@AndrewMurphy8383 29 күн бұрын

Looks like rg174?

@TheArtofEngineering Ай бұрын

I imagine that coax being as lossy as it will be broadens the Q making it look wider than it is?

@tomtwist1081 Ай бұрын

If you mean the main loop coax, I find that the best part of this antenna. Much better than an RG-213 or other braided coax. The main loss is probably in the C1 capacitors. 5 W @ 14.1 MHz would produce 7.35 A in a good loop this size.

@TheArtofEngineering Ай бұрын

@@tomtwist1081⁠no the feedline (2 mins 52 secs into video). But agreed using polyvaricon caps for the tuning is not really fit for purpose as well, considering the voltages generated at even modest power outputs is very high!

@migsvensurfing6310 Ай бұрын

Only using the screen on the loop itself, one could use chicken wire. The coax "functionality" is not used in the loop. Thick cable is desired for mechanical stability. I would rather like to see a measurement of the cable he didn't use....

@TheArtofEngineering Ай бұрын

@@migsvensurfing6310 Yes my mate has built one himself from aluminium strip. Worked 15000km Euro stations on 20w CW on his antenna ....in this video (DX will be in part 2 video :)) kzbin.info/www/bejne/fJ7OfnebjcZ2hbc

@tomtwist1081 Ай бұрын

@@TheArtofEngineering He is not using the RG-174 in his tests. It looks like RG-58. But the RG-174 only har 0.12 dB more loss than RG-174, and 0.21 dB at 28 MHz. Negiable compared to the other losses in this antenna.

@Ascania Ай бұрын

You sure that's coax? That looks like a shower hose they used.

@2321brendan Ай бұрын

In absolute best case scenario,this loop will be about 4% efficient at 7Mhz So 5w in = 200mw out at best . Probably more like 0.5% eff due to resistance in coax connections ,switches,cap wipers. So maybe 25mw out. QRRRRRRRRppppp

@PaulaBean Ай бұрын

Should be good for FT8 and FT65.

@BMCTackle Ай бұрын

Hmm. How does the loop do as a rec only antenna? I need a RX only loop!

@loughkb Ай бұрын

Poorly. I think I mentioned it briefly in the video that I only heard the strongest of stations.

@ronleblanc9832 Ай бұрын

could you do better by changing the coax loop size ???

@loughkb Ай бұрын

No the problem in this loop is the design and the inadequate capacitors.

@raymondmartin6737 Ай бұрын

If I spoke to the manufacturer I would give them some :cross talk.:

@johnwest7993 Ай бұрын

That looks like Heliax, a full copper shield, (basically thin copper pipe with ribs to allow some flex in order to bend it,) that they are using the shield of for their loop. This loop antenna appears to be made out of whatever assortment of junk parts they could find, and poorly 'designed' by someone who knows nothing about RF. Any homebrew $10 loop that is designed and built properly would far outperform this piece of junk. The short coax they provided looks close to RG-174, which might work for HF but is just an attenuator at VHF/UHF. This isn't designed to work. It's designed to take money from the unwary. BTW, with antenna lengths at VHF/UHF being what they are, and vertical antennas being so very cheap and simple, there is really no point in trying to build a much more complex and expensive tunable loop that offers almost no advantage beyond slight directivity to combat noise that likely doesn't exist at VHF/UHF wherever the user is located. Certain types of antennas are advantageous on certain bands, but are seldom optimal on other bands that are far removed.

@jpkellyburbank Ай бұрын

With the included coax it would have worked even worse. Buyer beware.

@bradfordcouncilman3136 Ай бұрын

FB OM

@johnnorth9355 29 күн бұрын

No inductor loop means it's junk.

@loughkb 29 күн бұрын

Not necessarily. There are other means of coupling, gamma match, ferrite transformer. However, the army made loops this way, and MFJ has a loop tuner that works this way that works quite well. The design idea is sound if properly implemented. This loop uses poor wiring and inadequate capacitors. The only thing good about it is the coaxial main loop.

@turboclub7658 19 күн бұрын

Its NOT a "MAG" Loop! Am I wrong? Tell me why it IS a "MAG" Loop... My DIY 40M Dual Mag Loop IS and works, by my NanoVNA and SDR RX results.

@loughkb 19 күн бұрын

From the wiki on loop antennas, "The small loop antenna is also known as a magnetic loop since the response of an electrically small loop is proportional to the rate of change of magnetic flux through the loop." Pretty much all loop antennas are magnetic loops. They work with the magnetic field.