Hammers Scope Check up

[@jamespollard1670]

I've always stayed with the traditional rings and never had a problem .

[@cw2a]

@@jamespollard1670 🤘🏼😜❤️‍🩹❤️‍🩹😜🤘🏼

[@walksfletcher]

Me too

[@markcarew6724]

The stock is quite attractive on this firearm, thanks for showing it to us.

[@cw2a]

@@markcarew6724 🤘🏼❤️‍🩹🙏❤️‍🩹🤘🏼

[@cw2a]

@@markcarew6724 thank you!!

[@bobcatforever3485]

CW. Interested video. Thanks for sharing.

[@cw2a]

@@bobcatforever3485 🙏🇺🇸😜🇺🇸🙏

[@CountryRimfire]

Absolutely love that pistol!! 😍 I hope that fixed your problem CW! That does look tight by the bolt 😮

[@cw2a]

@@CountryRimfire 😛🤘🏼❤️‍🩹🙏🙏❤️‍🩹😛🤘🏼

[@JCJustice-kv2gy]

Nice 👏👏👏👍🤝🤝🤝

[@cw2a]

@@JCJustice-kv2gy 🙏🇺🇸😜🇺🇸🙏

[@triggerbarPhD]

great video CW!

[@cw2a]

@@triggerbarPhD 😜🇺🇸🙏🇺🇸😜

[@BOHEMIANHUNTINGCLUB]

Bulk of my issues are usually rings.

[@cw2a]

@@BOHEMIANHUNTINGCLUB 🇺🇸🤘🏼❤️‍🩹❤️‍🩹🤘🏼🇺🇸

[@gunnwild1]

That was a brand new scope? For some reason I thought you got it used on ebay

[@cw2a]

@@gunnwild1 Brandy new sealed package. 🇺🇸😜🙏🙏

[@chrislang5659]

I've run out of adjustment before. Just figured the scope maxed out. Never thought about it being the rings?🤔

[@cw2a]

@@chrislang5659 😜🤘🏼❤️‍🩹🤘🏼😜

[@papasplace2]

Amazing just how much things change with just a small bit of tension... Just a gut feeling I have but I think that the Burris scope is going to be a much better solution for you on this pistol. Take care my friend

[@cw2a]

@@papasplace2 ❤️‍🩹🇺🇸😜🇺🇸❤️‍🩹

[@Jdelta22nc]

Good info sir.

[@cw2a]

@@Jdelta22nc Mornin man! 😜🙏🤘🏼

[@Jdelta22nc]

@@cw2a Good morning sir!

[@NoPro1962]

Thanks for sharing Hopfully get it were you want it🤞🏻💀✌🏻

[@cw2a]

@@NoPro1962 🤘🏼😜❤️‍🩹❤️‍🩹😜🤘🏼

[@l.a.3887]

Good stuff

[@cw2a]

Thanks Brother!!

[@frankbrowning328]

IMO there is a scope issue. Even if the scope ends up being able to be zeroed and stays zeroed, moving the adjustment knob should not be very easy and stiff.

[@cw2a]

@@frankbrowning328 Turns out, you are spot on. (My suspicion as well) I was able to shoot some very good groups but not able to center group. Scope was returned replacement ordered and received.

[@frankbrowning328]

@@cw2a That's what my suspicion was too. Any manufacturer can and will make parts out of spec and as long as they quickly take care of the problem with a proper replacement that's fine with me.

[@jamespugh]

Nice

[@cw2a]

Very nice🤘🏼🙏❤️‍🩹

[@bigracer3867]

Never heard of that brand? Dont like vertical split rings myself for anything. But hard to say. Base could be milled off. Rings off. I have seen a bunch of stuff over the years. I usuallu lapp everything to eliminate this issue to start. I believe stuff just not made as well anymore. But a IMHO moment🎉😂😊. One more thing. Scope might just be the issue too. Just tight springs. Which not a bad thing. 🎉🎉

[@cw2a]

I considered having new base D&T to the barrel. This mount is not great. First off its dovetail not weaver/ pic. Second its "universal" for keystone. Two screws in conventional place atop from ring of receiver. But only a third is in barrel but base is slotted to accept different hole spacing!??! My very first thought was it was crooked! But as well as I could see/ test its straight. I have now installed a pillar for the single mount screw. Then glass bed the action into the stock. Lastly, I replaced/returned this optic for a older used Fixed power Burris 7x. I test fired last nite but only @ 50' indoors. Had to move quite a bit right... But it did zero. Range soon. ❤️‍🩹🤘🏼😜🙏

[@ChrisFromThe740]

Good Evening CW

[@cw2a]

@@ChrisFromThe740 Hello. Hris!

[@Dwayne7834]

👍👍🇺🇸🇺🇸

[@cw2a]

@@Dwayne7834 🇺🇸😜❤️‍🩹❤️‍🩹🇺🇸🇺🇸

[@T.A.B.Videos]

Hope it works

[@cw2a]

@@T.A.B.Videos It didnt... 🙏😜🇺🇸

[@FukuYTmark6]

I have a Sniper scope that does that.

[@cw2a]

@@FukuYTmark6 😜🇺🇸❤️‍🩹