Han Solo in Carbonite for my workshop from Starwars!

[@originblueorion]

This was an awesome instructional video, thank you! I have been wondering how to paint them to get them accurate, but now I know! I'd like to be considered for the side panels. I had a prop business that I ran with a friend, but ended up getting ripped off to the tune of about 10,000, and I lost a friend! He's very successful now, I guess I don't understand how bad people keep prospering. I ordered some resin ones through eBay and they arrived broken and not at all as described. I wasn't able to get a refund for them, so now they're just sitting in my shop collecting dust. If I am consisted for the give away, it would sure be a breath of fresh air for the stroke or bad luck I've been having with prop building!

[@DaBuild]

My friend, you are definitely in...I m really sorry to hear about your story...😔 Not cool...I wish you the best of luck and thanks for watching!

[@davidlabeaute6072]

That sounds like a potential winner!

[@DaBuild]

YOU ARE THE WINNER! Contact me on my personal mail to give me your infos. [e-mail]

[@originblueorion]

@@DaBuild Holy smokes! Thank you so much! It's been a rough road doing prop stuff with the experience I've been having, so this is so amazing! Thank you again, I cannot tell you how grateful I am and how perfect this timing was.

[@jrcprops]

My dream build. I love the star wars music you chose for this

[@DaBuild]

The music is pretty epic!

[@jrcprops]

Its the music used in the trailer for the last film i believe. Where did you get the parts for this?

[@DaBuild]

@@jrcprops Bought it from a guy on the RPF platform :) otherwise, you may find similar on Etsy. Cheers!

[@DrippyPistol]

My son and I are huge Star Wars fans. Would love to work on this project with him. Thanks for the inspiration!

[@DaBuild]

Best reason in the world! Sharing that with your kid....You're in the draw!

[@wizardtowergames]

I just finished a few weeks ago my full size solo in carbonite, but made mine with the lights and side panels. You had a GREAT idea with this. From one maker to another, you do excellent work.

[@DaBuild]

Cheers buddy! I might update it someday with the electronic panel...I feel cheap now 😁 Thanks for watching!

[@wizardtowergames]

@@DaBuild sent ya an email just now with a link to my tiktok where I post my stuff. I would love your opinion, one creator to another.

[@PirateDave01]

Not a big Star Wars fan, but that is one of the coolest man cave things I’ve seen! Great job!!

[@DaBuild]

Thanks a bunch! And thanks for watching ☺️ Cheers!

[@JustinHemsley]

Yes! I've been wanting to do build a HIC forever, but the space issue is real. I love the idea of using it on a door! Thanks for the inspiration.

[@DaBuild]

My pleasure! And thanks for watching!

[@SylvainLebeau]

You are just crazy Dan... Amazing result. First time I see the dry brushing technique used at this scale!!!! haha!! Awesome work!

[@DaBuild]

Merci Sylvain! et merci d'avoir regardé. Cheers!

[@JacobHGamez]

I cant wait for this!

[@DaBuild]

cheers!

[@JacobHGamez]

Thanks

[@hebisdavproduction6963]

Thanks for posting, this is exactly what I was thinking for my office. Your tutorial will definitely help this process!

[@DaBuild]

Glad it helps! Would you like to be in for the giveaway?

[@hebisdavproduction6963]

@@DaBuild Yes, please!

[@DaBuild]

@@hebisdavproduction6963 You're in!

[@jrcprops]

Been a star wars fan all my life especially The Empire Strikes Back and this has been a dream prop of mine to build. Would love a chance at 3d panels. The music is awesome as well

[@DaBuild]

Well Joseph, you're in! and thanks for watching 😃

[@DaBuild]

Congrats to @BlueOrion! You are the winner of the giveaway! 🎉

[@dafunkmonkey]

Un accent familier messemble. Excellent video!

[@DaBuild]

Much appreciated 😊

[@DaBuild]

@@dafunkmonkey Quebec style 🫣

[@constantinslotty5309]

Nice build, man! I think the pragmatic approach really paid off.

[@DaBuild]

Thanks Constantin! And thanks for watching ☺

[@KnightAsylum]

Fantastic work. I would appreciate being considered for the giveaway as I love the side pieces and I already have the Han solo for my door conversion but also wanted to add the sides to the frame but do not have them. Ours will be to a spare bedroom so the door will not be open too much and so I dont think they will get in our way.

[@DaBuild]

Scott, you are definitely in! Let me know of you have any question. Cheers!

[@ivandelorenzis537]

I would like ti do a Solo on Carbonite 1:1 lamp for my son room. As separated family this Will make his room very appreciated. We are all star wars fan. I known this Will make him very Happy.

[@DaBuild]

Damn good reason! You're in! Thanks for watching 🙃

[@Rockin_Ross]

I saw a G4 tv special where Olivia Munn had castings done of her face and body to make a similar deal. Framed it up and used 5 gallons of Elmers glue to make the surrounding “Carbonite”. Painted it up much like you did and hung it on the wall. Makes me want to do this as the molds of Harrison Ford are $250 minimum.

[@DaBuild]

You should! It's well worth it if you ask me :) Cheers!

[@0Walgar0]

Amazing work!! It would be soo cool to have this in my star wars hobby/mancave for me and my two sons!🙌

[@DaBuild]

Oh yeah! You're in! Thanks for watching ☺

[@DaBuild]

By the way, for those who would like a cast similar to the one I used, check this one on Etsy: www.etsy.com/uk/listing/659447892/han-in-carbonite-castkit?ref=share_v4_lx

[@mitchellbrasier1314]

My family is a huge Starwars fan base (from my wife to my grand babies), we have a game room I would love to make the entrance a Han Solo in Carbonite to be a unique entrance. Thanks so much

[@DaBuild]

Pretty good reason! Entered!

[@daveboisvert7800]

Well! You know me! C’est probablement ma pièce préférée dans tout ce que tu fais! 🤩 Great work!

[@DaBuild]

merci Dave!

[@lucassilva-vo2ky]

I need this for my workshop! Would make such a great conversation piece. Thanks for sharing the idea and process!

[@DaBuild]

Cheers Lucas! You're in!

[@jeffolson3663]

Would be perfect for my refrigerator build!

[@DaBuild]

Indeed it would! You're in!

[@Darth_Synyster_92]

This is one of the greatest things I’ve ever seen, what a fantastic job, well done, definitely liking and subscribing to see more great projects

[@DaBuild]

Much appreciated Darth Synyster! Welcome aboard! Cheers 🎉

[@keng.2468]

Oh wow! Great job and ingenious idea to boot!

[@DaBuild]

Much appreciated Ken! And thanks for watching! Cheers!

[@davidskelton7960]

I think it looks great and I am a star wars fan to so props to you and great work

[@DaBuild]

Much appreciated David! 😃

[@johnrisner8649]

Love this project! Thanks for sharing.

[@DaBuild]

Well, thank you more for watching and commenting. Cheers!

[@jpfly2660]

Hello Master DaBuild ! I need it because you did it ! And my kid would love it ! ( Haikü du jour ...) Très cool encore une fois, Bravo !

[@DaBuild]

Merci Jp! You're in!

[@cruzekid1031]

Looks great, inspiration to do one of these.

[@DaBuild]

I'm super glad it does! Cheers!

[@TheBlackGreatWhite83]

Oh yeah, excellent work by the way!

[@DaBuild]

Thanks a bunch! And thanks for watching 🙃

[@DustinGabel]

That is awesome! I'm working on a small room in the house now for my Star Wars collection wanting to finish the walls with a theme to match, and making this door would be the finishing touch I just dont have a 3D printer so making those parts wouldn't be an option right now to get the full detail of the carbonite block. Well done, the amount of detail is unreal!

[@DaBuild]

Amazing! You're in and thank you for watching! Much appreciated 🙃

[@davidlabeaute6072]

Amazing work Dan! Well done! 😁

[@DaBuild]

Thank you! 😁

[@authentic4225]

Cool man! Everyone need a guy coming out of the wall lol

[@DaBuild]

😂 I do!

[@mattnickless5919]

Turned out great brother!

[@DaBuild]

Much appreciated Matt! Thanks for watching 🙃

[@blizatrex]

This looks awesome. I don't think it was worth the trouble on some of the initial sanding passes but a wonderful finished piece none the less.

[@DaBuild]

Cheers Wayne! You might be right but we never sand too much...well, yes, we do. 🙃🙃🙃

[@DaBuild]

But all kidding aside, the first pass was for the boddy filler. This is hard as stone once dry. The sander is required. The paper sanding was only for the touch up. Cheers!

[@kujo79]

As always Dan, amazing work. Bravo and keep up the really cool videos. Pas besoin de m’ajouter au tirage, je fais juste t’encourager - Joe

[@DaBuild]

Merci Jo! Super apprécié! 😁

[@samuellam2379]

Awesome need one for the game room.

[@DaBuild]

Cheers! You're in! Thanks for watching!

[@Nat-nu2mm]

Super cool idea!

[@DaBuild]

Cheers!

[@sacharequenagines8221]

Love it.

[@DaBuild]

Cheers Sacha! Thanks for watching! 🙃

[@noelsanjuan6969]

Thats cool amazing

[@DaBuild]

Cheers! Thanks for watching!🙃

[@stevefraser3776]

Great stuff , once again , good works, well done …

[@DaBuild]

Merci Stevy!

[@jeffreybosiljevac3408]

Very cool!!! If I were to try this… where would I go to get the Han Solo pieces?

[@DaBuild]

Thanks Jeffrey! Not the exact one as I used but, check this one on Etsy: www.etsy.com/uk/listing/659447892/han-in-carbonite-castkit?ref=share_v4_lx

[@jeffreybosiljevac3408]

@@DaBuild thank you!!!

[@DaBuild]

@@jeffreybosiljevac3408 cheers!

[@stevenjones2371]

really cool i might do this idea on my shop door after i get done with life size R2 i already have my costume of Boba Fett on a manican

[@DaBuild]

Thanks Steven! I wish I had the time and patience to build my own R2D2! Cheers

[@tomtom7974]

Oh Man!!! So Amazing!!

[@DaBuild]

Cheers Tommy! Very glad you liked it :)

[@christopherelizardo8456]

Beautiful work!! Every Star Wars fan would love to have that!!! Pick me please🙏

[@DaBuild]

Of course! Much appreciated :) You're in for the draw!

[@seblajoy8570]

I would give my left kidney for a door like this one in my house! Well done!

[@DaBuild]

Do it!

[@christopherday4027]

I have an area in my house that would make a good “Saferoom” for my wife and kids to hide in if ever there were to be a home invasion while I’m away. I originally was going to cover the door with a fake bookcase but I’ve decided to cover it with a Han Solo in carbonite. I would love to win your 3D printed side panel parts but if I don’t win, would you consider making some more and letting me purchase them? Thanks so much! FYI, your Han turned out awesome!!

[@DaBuild]

Thanks for your comment! Sadly, the giveaway was october 24th...🥲

[@booradley5150]

Nice work, looks great!

[@DaBuild]

Much appreciated 😊

[@albertomartin1842]

Gran trabajo , he visto muchos y me quedo con ese, donde buscaste las cajas que van en los laterales que no pusiste?

[@DaBuild]

¡Gracias! Simplemente busqué el modelo 3D Han Solo Carbonite gratis en la web. ¡Hay muchos de ellos!

[@ediesedgwick4462]

Nice work! 👍🏻

[@DaBuild]

Much appreciated Edie and thanks for watching ☺

[@ediesedgwick4462]

@@DaBuild My pleasure. 🤗

[@pascalgoupil8706]

VRAIMENT COOL ! Je suis jaloux 🥺....

[@DaBuild]

Merci Pascal! Tu vas pouvoir le voir live si tu veux!

[@TheBlackGreatWhite83]

I need them to finish my project

[@DaBuild]

You're in the draw sir!

[@solofett7222]

Wow looks Great I always wanted to buy one watching your video I’m inspired to build one would be great to have the your extra parts for my project. Thanks

[@DaBuild]

Amazing! You're in and thanks for your support!

[@romeoaurelianvieru9288]

Nice idea and execution ; by now u give away those command enclosure ,so u can print 3 more for yourself : 1 in vertical ,up , wright side of Solo , second opposite side but horizontally , and the third ,vertically under left hand ; with lighting sequences for the gizmos ( SI-FI !!! another form for carbonite conservation) . Better then no light effects ,and u child can damage "parafarnalia " . JUST IDEA , DO NOT BE MAD ON ME ! ....... MORE : optic fiber , with visible light conduction in all length , in enclosure with LED multicolour ( not with IC) , in 2 or 3 point ,made some electric arcs effect ......

[@DaBuild]

That's actually a pretty good idea and quite simple! Thanks a bunch!

[@romeoaurelianvieru9288]

@@DaBuild nice to be useful

[@romeoaurelianvieru9288]

I mean GLAD to be useful

[@DaBuild]

@@romeoaurelianvieru9288 Oh yeah! 😁

[@bravoromeojohn]

Have lost too many friends in the industry man...have to say something...or do nothing, but please wear a mask when mixing/applying Bonds too mate 🙏. Otherwise, as always...amazing talent and inspiration just watching...thank you!

[@DaBuild]

Totally right! I usually do! Cheers!

[@lwong1296]

Beautiful!!!

[@DaBuild]

Thank you!

[@SimpleJack8]

Nice Work 👌

[@DaBuild]

Cheers!

[@benives254]

Where would a muggle get casts like those?!

[@DaBuild]

It's in the description my friend! Cheers!

[@loganalexander780]

Great job🎉, question where did you get the files for the side panels?

[@DaBuild]

I believe it was on Thingiverse

[@bmx_bros5288]

Best idea ever

[@DaBuild]

Cheers! 🙃

[@gfabasic32]

Excellent!

[@DaBuild]

Cheers!

[@rickwatson4601]

I enjoyed watching your build. I would like to be entered in your give a way. I am getting ready to start the build. I have the cast already. I do not own a 3D printer to make the side controls. I will be concealing a doorway with my Han in Carbonite Block. Thank you for your consideration.

[@DaBuild]

Thanks Rick! Best of luck! Your name is in the hat! cheers! Dan

[@MM-rw5bh]

Amazing!

[@DaBuild]

Cheers!

[@carmenvargas-zayas8868]

Today is my son’s 23rd birthday and he has been amazing and quit school after having complications do to needing to stay home and help take care of me and has been collecting sw since he was 5 and I would luv to do a barn door for his closet but on disability and limited on funds so can u help with a print out or info for someday when we finally save for 3D printer, also please how can i get the mold for carbonate ?? Thx n God Bless

[@DaBuild]

Hello Carmen! I am sorry to hear about your son...sadly, the giveaway was done few months ago. I wish you all the best to you and your son. Cheers

[@carmenvargas-zayas8868]

@@DaBuild thx so so much, sorry for the inconvenience and God Bless you and yours

[@DaBuild]

@@carmenvargas-zayas8868 No inconvenience at all! Take care!

[@arthurmeis6302]

Is an good Idea for my Gaming Room. Is Han 3d Print?

[@DaBuild]

You can find the link for the kit in the comment section and the description

[@arthurmeis6302]

@@DaBuild thanks

[@DaBuild]

@@arthurmeis6302 my pleasure

[@wheeler56]

Where did you get solo cast???

[@DaBuild]

Hey Chris! I got it from a guy on the RPF platform but I put a link to a similar one in the comments. Thanks for watching! Cheers! ☺

[@rollediaz1536]

That's so cool. How do u get the mold of the rough cast of Hon solo??

[@DaBuild]

I got it from someone on the RPF platform. Otherwise, I already commented on where you could get a similar mold on Etsy. Check it out :) Cheers!

[@ledpig6787]

where did you get the light up top?

[@DaBuild]

Amazon buddy: search for ''Wireless Picture Lights''

[@jimkarnes7724]

Are they resin forms or 3d print STL

[@DaBuild]

Resin :)

[@TobieCote]

We are googling Solo carbonite molding after this...

[@DaBuild]

As you should! Merci Tobie!

[@sirchopz]

Where did you get the resin caps of Solo

[@DaBuild]

Hey there! Check the comments. I put a link to a similar one. Cheers!

[@pakbowl420]

where did you get the Han Solo parts?

[@DaBuild]

I left a comment below 👇 with the link

[@billg3356]

Dude.

[@DaBuild]

🫣

[@Eevee_kwh]

👌

[@DaBuild]

Thanks a lot for watching Ed! Cheers!

[@RichardValentine-zk6gu]

You didn’t make the cast. What’s the point in creating a how to? 🤦‍♂️

[@DaBuild]

To help you do the rest. The cast can be bought anywhere. Link in the description if you need one. Cheers.

[@mooseyman74]

I can smell the filler! 😅

[@DaBuild]

Oh yeah!🙃

[@gregjohnson9776]

Where did you get the han mold?

[@DaBuild]

Hello Greg, I bought from someone on the RPF platform but, you may get one on Etsy. Link in the description. Cheers!